Validation of methods to estimate design discharge flow rates for dam spillways with large regulating capacity

Abstract

The estimation and review of discharge flow rates in hydraulic works is a fundamental problem in water management. In the case of dams with large regulating capacity, in order to estimate return periods of discharge flow rates from the spillways, it becomes necessary to consider both peak flow and volume of the incoming floods. In this paper, the results of the validation for several methods of assessing design floods for spillways of dams with a large flood control capacity are presented; the validation is performed by comparing the maximum outflows (or the maximum levels reached in the reservoir) obtained from the routing of the design floods with those obtained from the routing of the historical annual maximum floods. The basin of Malpaso Dam, Mexico, is used as the case study.

Editor D. Koutsoyiannis

Citation Domínguez, M.R. and Arganis, J.M.L., 2012. Validation of methods to estimate design discharge flow rates for dam spillways with large regulating capacity. Hydrological Sciences Journal, 57 (3), 460–478.     

Dynamic response and optimal design of structures with large mass ratio TMD

This paper investigates the dynamic behavior and the seismic effectiveness of a non‐conventional Tuned Mass Damper (TMD) with large mass ratio. Compared with conventional TMD, the device mass is increased up to be comparable with the mass of the structure to be protected, aiming at a better control performance. In order to avoid the introduction of an excessive additional weight, masses already present on the structure are converted into tuned masses, retaining structural or architectural functions beyond the mere control function. A reduced order model is introduced for design purposes and the optimal design of a large mass ratio TMD for seismic applications is then formulated. The design method is specifically developed to implement High‐Damping Rubber Bearings (HDRB) to connect the device mass to the main structure, taking advantage of combining stiffness and noticeable damping characteristics. Ground acceleration is modeled as a Gaussian random process with white noise power spectral density. A numerical searching technique is used to obtain the optimal design parameter, the frequency ratio alpha, which minimizes the root‐mean‐square displacement response of the main structure. The study finally comprises shaking table tests on a 1:5 scale model under a wide selection of accelerograms, both artificial and natural, to assess the seismic effectiveness of the proposed large mass ratio TMD. Copyright © 2011 John Wiley & Sons, Ltd.     

Response Surface Optimization for Removal of Cadmium from Aqueous Solution by Waste Agricultural Biosorbent Psidium guvajava L. Leaf Powder

Response surface methodology (RSM) was applied to study the combined effects of the various parameters namely, pH, biosorbent dosage, cadmium concentration and temperature, and to optimize the process conditions for the maximum removal of cadmium using Psidium guvajava L. leaf powder. In order to obtain the mutual interactions between the variables and to optimize these variables, a 2⁴ full factorial central composite design using RSM was employed. The analysis of variance (ANOVA) of the quadratic model demonstrates that the model was highly significant. The model was statistically tested and verified by experimentation. A maximum cadmium removal of 93.2% was obtained under the following optimum conditions: aqueous cadmium concentration 40.15 mg/L, adsorbent dosage 0.5 g/50 mL solution, pH 5.0, and temperature (35°C). The value of desirability factor obtained was 1.     

基于人机工程学原则的地震公共标志有效性评估与建议

基于标志的人机工程学原则,对GB/T24362—2009中地震公共信息图形标志的有效性进行测试评估,结合理解率、熟悉度、物理相符性、概念相符性的测试数据,评估本标准中的标志符号是否符合国际标准化组织(ISO)评估标准,重点分析该标准中高理解率标志和低理解率标志的影响因素,探讨物理相符性、概念相符性和熟悉度影响标志理解率(P＜0.001)的机制机理。通过对测试数据的研究发现,物理相符性和熟悉度是影响标志理解率的最大因素,进而得出提升标志的有效性首先要提高标志图形的物理相符性、概念相符性和熟悉度的结论。最后结合人机工程学原则对GB/T24362—2009中的部分理解率较低的标志进行分析,提出了具体的改良设计建议。     

大跨度钢管混凝土拱桥抗震性能指标研究

高轴压比钢管混凝土墩柱的试验结果对钢管混凝土拱肋具有较大的借鉴意义。为明确大跨度钢管混凝土拱桥的抗震性能指标,研究了高轴比钢管混凝土构件的破坏过程及延性性能。以弯矩作为性能指标将高轴压比钢管混凝土构件的试验破坏过程分为轻微损伤、有限损伤与严重损伤3个阶段,结合钢管混凝土截面性能状态的数值分析,探讨了高轴压比钢管混凝土构件的破坏机理。结果表明:高轴压比钢管混凝土构件具有一定的可用延性;提出了以计算等效屈服弯矩作为抗震性能指标,适当利用延性和实现钢管混凝土拱桥的有限损伤抗震设计,并给出了与有限损伤相关的截面性能状态及参数。研究成果弥补了规范在此方面的不足,可供高烈度地震区大跨度钢管混凝土拱桥抗震设计时参考。     

Comparison of seismic actions and structural design requirements in Chinese code GB 50011 and international standard ISO 3010

This paper presents a comparison between the Chinese Code GB50011-2001 and the International Standard ISO3010: 2001(E), emphasizing the similarities and differences related to design requirements, seismic actions and analytical approaches. Similarities include: earthquake return period, conceptual design, site classification, structural strength and ductility requirements, deformation limits, response spectra, seismic analysis procedures, isolation and energy dissipation, and nonstructural elements. Differences exist in the following areas: seismic levels, earthquake loading, mode damping factors and structural control.     

基于LabVIEW的预应力孔道压浆质量检测仪的软件设计

本文提出了一种预应力孔道压浆质量检测仪的硬件方案,在此基础上介绍了基于LabVIEW的仪器软件设计,重点讨论了软件实现的关键技术,实现了参数设置,多通道超声信号采集,文件管理等功能.软件界面友好,操作简单,适应仪器的野外工作,且升级维护方便.     

Optimum design and application of non‐traditional tuned mass damper toward seismic response control with experimental test verification

A variant type of tuned mass damper (TMD) termed as ‘non‐traditional TMD (NTTMD)’ is recently proposed. Mainly focusing on the employment of TMD for seismic response control, especially for base‐isolated or high‐rise structures, this paper aims to derive design formulae of NTTMDs based on two methodologies with different targets. One is the fixed points theory with the performance index set as the maximum magnitude of the frequency response function of the relative displacement of the primary structure with respect to the ground acceleration, and the other is the stability maximization criterion (SMC) to make the free vibration of the primary structure decay in the minimum duration. Such optimally designed NTTMDs are compared with traditional TMDs by conducting both numerical simulations and experiments. The optimum‐designed NTTMDs are demonstrated to be more effective than the optimum‐designed traditional TMDs, with smaller stroke length required. In particular, the effectiveness of the TMDs combined with a base‐isolated structure is investigated by small‐scale model experimental tests subjected to a time scaled long period impulsive excitation, and it is demonstrated that the SMC‐based NTTMD can suppress structural free vibration responses in the minimum duration and requires much smaller accommodation space. Additionally, a small‐scale shaking table experiment on a high‐rise bending model attached with a SMC‐based NTTMD is conducted. This study indicates that NTTMD has a high potential to apply to seismic response control or retrofit of structures such as base‐isolated or central column‐integrated high‐rise structures even if only a limited space is available for accommodating TMDs. Copyright © 2015 John Wiley & Sons, Ltd.     

设计反应谱标定方法的研究现状与讨论

设计反应谱及其标定方法的研究是工程抗震研究领域的基本问题之一。在现有研究成果的基础上,归纳和总结了设计反应谱及其标定方法的研究历史和现状;评述了研究进程中的若干节点问题;介绍了设计反应谱的标定原理和当前几种有代表性的设计反应谱的标定方法;分析了设计反应谱标定参数的影响因素。在此基础上,对设计反应谱及其标定方法研究中的强震资料积累问题、谱形状问题、标定参数的确定问题以及标定方法等问题进行了讨论并提出了改进和进一步研究的建议。