Oxydation expérimentale de Fe-tourmalines et corrélation avec une déprotonation des groupes hydroxyleAnnealing in oxidising conditions of Fe-tourmalines and correlated deprotonation of OH groups

Annealing at 400?T?600 °C (40?P?60 MPa and HM buffer-controlled f(O₂)) of tourmalines synthesised at the same T and P with NNO buffer induces an oxidation of Fe²⁺ into Fe³⁺ in some Y sites only (Mössbauer Spectroscopy data). Annealing in the same conditions of natural tourmalines is consistent with these results. FTIR spectroscopy shows that oxidation of Fe²⁺ into Fe³⁺ is charge-balanced by deprotonation of the external OH₍₃₎ groups. To cite this article: Y. Fuchs et al., C. R. Geoscience 334 (2002) 245–249.     

锡铁山铅锌矿地质特征、矿床成因及找矿标志

通过找矿工作的实践，认为锡铁山铅锌矿床是由火山喷流沉积—后期热液叠加改造富集的块状硫化物多金属矿床。区域上NW—SE向早古生代形成的裂谷带，三级盆地内沉积的晚奥陶世滩间山群的大理岩与绿片岩系是表区找矿的最佳区段。而绢云绿泥斜长片岩、含碳质绢云绿泥片岩、白色大理岩、条带状大理岩是铅锌矿的最重要的找矿标志。     

巴音宝力格隆起带中新生代盆地砂岩型铀矿成矿地质条件及远景分析

本根据野外调查及室内系列编图成果，分析了巴音宝力格隆起带中新生代盆地砂岩型铀矿成矿地质条件，认为下白里统巴彦花组是中新生代盆地的找矿目的层位，并存在古河道与潜水层间氧化带两种砂岩型铀矿类型。巴彦毛都、准巴彦塔拉、乌里雅斯太和伊勒门盆地是形成砂岩型铀矿的远景盆地。     

光催化氧化法处理难降解废水的研究进展

综述了光催化氧化处理难降解废水的研究现状及发展趋势。介绍了影响光催化氧化反应速率的因素及光催化氧化法在处理难降解废水中的应用。     

吐哈盆地西南缘地浸砂岩型铀矿地质特征及找矿前景

通过对近几年来十红滩地区铀矿勘查资料及找矿成果的综合研究，系统阐述了吐哈盆地西南缘十红滩矿床的地质构造、含矿岩系沉积环境、砂体分布、层问氧化带发育特征等铀成矿条件，对矿区南、北矿带控矿层间氧化带分带性、矿体形态、规模、空间展布、铀存在形式、成矿年龄及铀成矿规律进行了详细研究。进一步总结了区域砂岩型铀成矿条件和找矿前景，指出吐哈盆地西南缘随着找矿工作进展可望成为大型地浸砂岩型铀资源基地，并对指导天山造山带及类似地区地浸砂岩型铀矿找矿具有重要意义。     

自然电场法在寻找层间氧化带型砂岩铀矿中的应用

介绍了自然电场形成的原理及在寻找层间氧化带砂岩型铀矿中的应用.根据氧化带与还原带的自然电位变化特征,利用自然电场法可以确定盆地层间氧化带前锋线,由此推测层间氧化带砂岩型铀矿大体空间位置.     

THE SEDIMENTATION AND DREDGING OF GUANTING RESERVOIR

1 INTRODUCTION Guanting Reservoir is located on the Yongding River (a large tributary of the Haihe River) and at the border of Beijing Municipality and Hebei Province. The reservoir receives three tributaries: the Sanggan River with a drainage area of 25,840 km2, the Yanghe River with 16,170 km2, and the Guishui River with 852 km2. The drainage area above the reservoir is 43,402 km2. The reservoir has two arms. The Sanggan River and Yanghe River join the Yongding River at the ups…     

A STUDY ON THE FLOOD STORAGE CAPACITY IN DONGTING LAKE

1 INTRODUCTION Dongting Lake lies south of the middle reach of the Yangtze River in Hunan and Hubei provinces (Fig. 1). On the north side of Dongting Lake, there are the three diversion openings of the Yangtze River named Songzi, Taiping, and Ouchi, and, on the south and west sides, there are the four tributary streams named Xiang, Zi, Yuan, and Li Rivers. The flow of the three diversion openings and the four tributary streams runs into Dongting Lake, and runs out at Chenglingji a…     

滇池微生物解磷与聚磷作用的实验研究及磷的现代沉积与微生物成矿作用

滇池是世界上磷质来源最丰富的湖泊，是研究磷的现代沉积和微生物对磷循环作用及微生物成矿的天然场所。研究发现，滇池微生物种群和数量繁多，但能对磷溶解、转化、迁移、聚集、沉积的微生物主要有解磷菌和聚磷菌两类。这两类微生物与滇池磷的含量之间有一系列规律的相关性：在底泥磷高含量区域，解磷菌的种群和数量与底泥磷含量成负相关关系，与水体磷含量成正相关关系，而聚磷菌的种群和数量与底泥磷含量成正相关关系，与水体磷含量成负相关关系；在底泥磷低含量区域，上述相关性则相反。滇池中这种活着的微生物在自然环境条件下对磷的溶解、转化、迁移、聚集和沉积的作用，对古磷块岩微生物成矿说提供了可靠的依据，而且对以磷为限制性因子的湖、海、江河环境污染的防治提供了理论资料。     

The stability of a remediated bed in Hamilton Harbour,Lake Ontario,Canada

ABSTRACT In situ measurements of lakebed sediment erodibility were made on three sites in Hamilton Harbour, Lake Ontario, using the benthic flume Sea Carousel. Three methods of estimating the surface erosion threshold (τ_c(0)) from a Carousel time series were evaluated: the first method fits measures of bed strength to eroded depth (the failure envelope) and evaluates threshold as the surface intercept; the second method regresses mean erosion rate (E_m) with bed shear stress and solves for the floc erosion rate (E_f) to derive the threshold for E_m = E_f = 1 × 10^?5 kg m^?2 s^?1; the third method extrapolates a regression of suspended sediment concentration (S) and fluid transmitted bed shear stress (τ₀) to ambient concentrations. The first field site was undisturbed (C) and acted as a control; the second (W) was disturbed through ploughing and water injection as part of lakebed treatment, whereas the third site (OIP) was disturbed and injected with an oxidant used for remediation of contaminated sediment. The main objectives of this study were: (1) to evaluate the three different methods of deriving erosion threshold; (2) to compare the physical behaviour of lacustrine sediments with their marine estuarine counterparts; and (3) to examine the effects of ploughing and chemical treatment of contaminated sediment on bed stability. Five deployments of Sea Carousel were carried out at the control site. Mean erosion thresholds for the three methods were: τ_c(0) = 0·5 (±0·06), 0·27 (±0·01) and 0·34 (±0·03) Pa respectively. Method 1 overpredicted bed strength as it was insensitive to effects in the surface 1–2 mm, and the fit of the failure envelope was also highly subjective. Method 2 exhibited a wide scatter in the data (low correlation coefficients), and definition of the baseline erosion rate (E_f) is largely arbitrary in the literature. Method 3 yielded stable (high correlation coefficients), reproducible and objective results and is thus recommended for evaluation of the erosion threshold. The results of this method correlated well with sediment bulk density and followed the same trend as marine counterparts from widely varying sites. Mass settling rates, expressed as a decay constant, k, of S(t), were strongly related to the maximum turbidity at the onset of settling (S_max) and were also in continuity with marine counterparts. Thus, it appears that differences in salinity had little effect on mass settling rates in the examples presented, and that biological activity dominated any effects normally attributable to changes in salinity. Bedload transport of eroded aggregates (2–4 mm in diameter) took place by rolling below a mean tangential flow velocity (U_y) of 0·32 ms^?1 and by saltation at higher velocities. Mass transport as bedload was a maximum at U_y = 0·4 ms^?1, although bedload never exceeded 1% of the suspended load. The proportion of material moving as bedload was greatest at the onset of erosion but decreased as flow competence increased. Given the low bulk density and strength of the lakebed sediment, the presence of a bedload component is notable. Bedload transport over eroding cohesive substrates should be greater in estuaries, where both sediment density and strength are usually higher. Significant differences between the ploughed and control sites were apparent in both the erosion rate and the friction coefficient (φ), and suggest that bed recovery after disruption is rapid (< 24 h). τ_c(0) increased linearly with time after ploughing and recovered to the control mean value within 3 days. The friction coefficient was reduced to zero by ploughing (diagnostic of fluidization), but increased linearly with time, regaining control values within 6 days. No long‐term reduction in bed strength due to remediation was apparent.