http://www.sciencedirect.com/science/article/pii/S1674987111000405

This study has focused on the processes of soil degradation and chemical element concentration in tea-growing regions of Rwanda, Africa. Soil degradation accelerated by erosion is caused not only by topography but also by human activities. This soil degradation involves both the physical loss and reduction in the amount of topsoil associated with nutrient decline. Soil samples were collected from eleven tropical zones in Rwanda and from variable depth within each collecting site. Of these, Samples from three locations in each zone were analyzed in the laboratory, with the result that the pH of all soil samples is shown to be less than 5 (pH < 5) with a general average of 4.4. The elements such as iron (Fe), copper (Cu), manganese (Mn), and zinc (Zn) are present in high concentration levels. In contrast calcium (Ca) and sodium (Na) are present at low-level concentrations and carbon (C) was found in minimal concentrations. In addition, elements derived from fertilizers, such as nitrogen (N), phosphorous (P), and potassium (K) which is also from minerals such as feldspar, are also present in low-level concentrations. The results indicate that the soil in certain Rwandan tea plantations is acidic and that this level of pH may help explain, in addition to natural factors, the deficiency of some elements such as Ca, Mg, P and N. The use of chemical fertilizers, land use system and the location of fields relative to household plots are also considered to help explain why tea plantation soils are typically degraded.     

Environmental capacity of chemical oxygen demand in the Bohai Sea: modeling and calculation

A three-dimensional advection-diffusion model coupled with the degradation process is established for describing the transport of chemical oxygen demand (COD). Comparison of the simulated distribution of COD at the surface in the Bohai Sea in August, 2001 with field observations, shows that the model simulates the dataset reasonably well. The Laizhou Bay, Bohai Bay, and Liaodong Bay were contaminated heavily near shore. Based on the optimal discharge flux method, the Environmental Capacity (EC) and allocate...     

Elasto-viscoplastic finite element study of the effect of degradation on bearing capacity of footing on clay ground

The bearing capacity of footing has been studied by both conventional and numerical methods by many researchers. However, degradation of the microstructure of material, that is, a change in the microstructure of the soil, has not been adequately taken into account. Degradation of microstructure causes strain softening of materials and it leads to strain localization such as shear bands and slip bands. From an engineering point of view the strain localization is crucial because it is a precursor of failure. In the present study, finite element analyses of the bearing capacity of a shallow foundation on homogeneous and inhomogeneous saturated clay strata have been conducted using an elasto-viscoplastic soil constitutive model of microstructure change. A series of analyses of footing on clay deposit with different microstructure parameters have been carried out. Numerical results show that strain localization can be predicted during the loading of rigid footing on highly structured soil and strain localization affects the footing–soil interaction. The effects of footing roughness on the failure mechanism are also discussed in the study.     

四川紫色土退化的分类与分区

四川紫色土耕地面积406.1万公顷,占全省耕地面积的36.5％,属全省农业生产的主体区域。四川紫色土普遍退化。退化分为物理性(含构造性)、化学性、营养性三类。用模糊综合评判方法,评价了四川(主要为盆地丘陵区)紫色土退化的程度和状况。同时又建立了退化紫色土的分区原则,将四川紫色土退化分布区域划分为6个退化亚区,10个退化小区。     

Seismic vulnerability evaluation of axially loaded steel built-up laced members Ⅱ： evaluations

The test results described in Part 1 of this paper （Lee and Bruneau, 2008） on twelve steel built-up laced members （BLMs） subjected to quasi-static loading are analyzed to provide better knowledge on their seismic behavior. Strength capacity of the BLM specimens is correlated with the strength predicted by the AISC LRFD Specifications. Assessments of hysteretic properties such as ductility capacity, energy dissipation capacity, and strength degradation after buckling of the specimen are performed. The compressive strength of BLMs is found to be relatively well predicted by the AISC LRFD Specifications. BLMs with smaller kl/r were ductile but failed to reach the target ductility of 3.0 before starting to fracture, while those with larger kl/r could meet the ductility demand in most cases. The normalized energy dissipation ratio, EC/ET and the normalized compressive strength degradation, Cr″/Cr of BLMs typically decrease as normalized displacements δ/δb,exp increase, and the ratios for specimens with larger kl/r dropped more rapidly than for specimens with smaller kl/r; similar trends were observed for the monolithic braces. The BLMs with a smaller slenderness ratio, kl/r, and width-to-thickness ratio, b/t, experienced a larger number of inelastic cycles than those with larger ratios.     

闽江河口湿地生态退化现状与保护对策

闽江河口湿地是福建省最重要的湿地之一,但该湿地正遭受不同程度的退化。通过实地调查,其退化类型可分为：面积减少退化型、生物多样性受损退化型、污染退化型、生物入侵退化型和泥沙淤积退化型。据此提出了闽江河口湿地生态保护的对策,保障闽江河口湿地生态环境与社会经济协调、稳定与可持续发展。     

Soil organic carbon and nitrogen content of density fractions and effect of meadow degradation to soil carbon and nitrogen of fractions in alpine Kobresia meadow

This research was conducted on the non-disturbed native alpine Kobresia meadow(YF) and the severely degraded meadow(SDL) of Dari County of Qinghai Province.By a density fractionation approach,each soil sample was divided into two fractions:light fraction(LF) and heavy fraction(HF).The obtained fractions were analyzed for organic carbon(OC) and nitrogen(N) concentrations.The results showed:(1) the OC concentration in HF and LF was 3.84% and 28.63% respectively while the nitrogen concentration in HF and LF wa...     

Removal of Selenium by Adsorption onto Granular Activated Carbon (GAC) and Powdered Activated Carbon (PAC)

The present work involves the study of Se(IV) adsorption onto granular activated carbon (GAC) and powdered activated carbon (PAC). The adsorbents are coated with ferric chloride solution for the effective removal of selenium. The physico-chemical characterization of the adsorbents is carried out using standard methods, e. g., proximate analysis, scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR), thermo-gravimetric (TGA) and differential thermal analysis (DTA), etc. The FTIR spectra of the GAC and PAC indicate the presence of various types of functional groups, e. g., free and hydrogen bonded OH groups, silanol groups (Si-OH), alkenes, and CO group stretching from aldehydes and ketones on the surface of adsorbents. Batch experiments are carried out to determine the effect of various factors such as adsorbent dose (w), initial pH, contact time (t), and temperature (T) on the adsorption process. The optimum GAC and PAC dosage is found to be 10 g/L and 8 g/L, respectively, for Se(IV) removal with C₀ = 100 mg/L. The percent removal of Se(IV) increases with increasing adsorbent concentration, while removal per unit weight of adsorbent increases with decreasing adsorbent concentration. Se(IV) adsorption onto both the GAC and PAC adsorbents is high at low pH values, and decreases with increased initial pH. The results obtained are analyzed by various kinetic models. The parameters of pseudo-first order, pseudo-second order kinetics, and Weber-Morris intra particle kinetics are determined. It is seen that the sorption kinetics of Se(IV) onto GAC and PAC can be best represented by the pseudo-second order kinetic model.     

Adsorption of Selenium Using Bagasse Fly Ash

The present work involves the study of Se(IV) adsorption onto bagasse fly ash. The adsorbents were coated with a ferric chloride solution for the effective removal of selenium. The physico‐chemical characterization of the adsorbent was carried out using standard methods, e. g., proximate analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, thermo‐gravimetric analysis and differential thermal analysis. Batch experiments were carried out to determine the effect of various parameters such as adsorbent dose, initial pH, contact time, and temperature on the adsorption process. Results obtained from these studies were analyzed using various kinetic models and isotherms. Se(IV) adsorption onto adsorbent was high at low pH values, and decreased with an increase in initial pH. A temperature study showed that the uptake of Se(IV) was greatest at 293 K, within the temperature range studied. The parameters of pseudo first order, pseudo second order, and Weber‐Morris intra‐particle kinetic models were determined. Equilibrium isotherms were analyzed using Langmuir, Freundlich, and Temkin isotherms. Error analyses were also carried out using hybrid fractional error function and Marquardt's percent standard deviation.