饱和黏性土蠕变变形试验研究

结合苏锡常地区地面沉降研究,用单向固结仪研究饱和黏性土在复杂荷载作用下的蠕变变形特征。试验土样取自苏锡常地区第2弱透水层。研究结果表明,在初次加载时黏性土具有明显的蠕变性,在双对数坐标中蠕变变形与时间呈直线关系,且直线斜率随荷载水平增大而减小,但在荷载水平达到一定值后斜率变化不大;在初次卸载时黏性土仍有明显的回弹蠕变,特别是在卸载水平较高时,卸载回弹蠕变变形与应力和时间的关系仍可用幂函数表示;在循环荷载作用下,加卸载达到变形稳定的时间随循环次数增加而减小。当循环荷载最大值小于土样的先期固结压力时,土样在2次加卸载循环后达到弹性变形状态;当循环荷载最大值等于土样的先期固结压力时,土样在5次加卸载循环后达到弹性变形状态。     

岩体波速与坝基岩体变形模量关系

岩体变形模量是岩体工程设计最重要的参数之一,尽管其可以通过各种现场试验来获得,但因其耗时、费力、投资大,使得许多中小型工程及大型工程的初步设计阶段无法通过试验来得到这一参数。因此,许多研究者建立了诸多岩体变形模量与岩体物理力学参数或岩体质量分级之间的相关关系,如岩体变形模量与RQD、RMR分级、Q分级、岩体纵波速度等之间的关系,从而利用这些关系估算岩体变形模量。总结了已有估算岩体变形模量的各种方法,讨论了其应用条件及预测结果,重点分析了利用岩体纵波速度估算岩体变形模量的方法及存在的问题,并以玛尔挡坝址为实例,建立了相关预测公式。通过与已有估算方法的对比研究,阐明了各种方法预测结果的异同,表明其建立的估算公式与Barton等公式具有较好的一致性,可以用来估算岩体的变形模量     

不同压应力作用下黏土体积变形的微观特征

为了研究黏土体积变形的微观结构变化特征,选取上海第4层淤泥质黏土为研究对象,分别采用各向等压和K0压缩两种方法制备体积变化率相同的土样,经冷冻真空干燥后对土样进行压汞试验并测定土中孔隙大小分布状况。压汞试验结果表明：试验黏土中孔隙可分为大孔隙、中孔隙、小孔隙和微孔隙,小孔隙占据土中孔隙的大部分空间,且其变化能够反映微观结构的主要特性;在各向等压应力状态下,随着压应力增高、体积压缩量增大,黏土颗粒发生空间平移使颗粒间变得更为紧密,孔隙分布曲线变化以孔隙波峰往孔隙变小方向偏移为主要特征,孔隙尺寸变小而孔隙形态基本不变;在K0压缩应力状态下,随着压应力增高,黏土颗粒发生旋转使孔隙变得扁平,表现为孔隙波峰位置基本不发生偏移,而以峰值降低为主要特征,孔隙结构形态明显改变     

大厚度自重湿陷性黄土湿陷变形特性水分入渗规律及地基处理方法研究

为研究大厚度自重湿陷性黄土的湿陷变形特性、水分入渗规律以及地基处理合理方法等问题,选择典型大厚度自重湿陷性黄土场地,进行了布置沉降观测点和埋设水分计的浸水试验以及挤密桩、DDC（孔内深层强夯）桩地基处理试验。试验结果表明,在水分入渗过程中,深度22.5～25.0 m以上土体易发生湿陷,该深度以下土体则含水率增加缓慢,达不到湿陷起始含水率,不易发生湿陷,因此该深度考虑可作为现场湿陷性评价的临界深度,也可作为大厚度湿陷性黄土地区进行地基处理时可参考的地基处理下限深度。DDC桩间距为1.0～1.4 m时,无论从挤密系数还是湿陷系数都能满足规范要求;挤密桩15 m试验区域沉降量较小,但其剩余湿陷量任未满足要求,这也佐证了关于22.5～25.0 m深度难于发生湿陷的结论。试验成果可作为今后大厚度自重湿陷性黄土地区工程建设以及黄土规范进一步修订的参考。     

中国东部上地幔岩石组构与稀土配分之间的关系

本文通过对中国东部新生代玄武岩中二辉橄榄岩包体的研究认为,上地幔岩石变形结构和组构类型在不同大地构造单元中的分布是不同的,据此,可划分为华北—东北上地幔弱变形域和东南沿海上地幔强变形域。与变形特征对应的东南沿海地区包体稀土元素配分型式为LREE富集型,华北—东北地区包体稀土元素配分型式则为平坦型和轻微LREE富集型,这表明上地幔流变剪切作用强度与稀土元素富集作用呈正相关,同时反映出上地幔流变状态的差异。根据包体变形特征,我们提出华北—东北地区与东南沿海地区中新生代具有截然不同的大地构造演化特征。     

Deformation patterns of upper Quaternary strata and their relation to active tectonics,Po Basin,Italy

Despite increased application of subsurface datasets below the limits of seismic resolution, reconstructing near‐surface deformation of shallow key stratigraphic markers beneath modern alluvial and coastal plains through sediment core analysis has received little attention. Highly resolved stratigraphy of Upper Pleistocene to Holocene (Marine Isotope Stage 5e to Marine Isotope Stage 1) alluvial, deltaic and coastal depositional systems across the southern Po Plain, down to 150 m depth, provides an unambiguous documentation on the deformation of previously flat‐lying strata that goes back in time beyond the limits of morphological, historical and palaeoseismic records. Five prominent key horizons, accurately selected on the basis of their sedimentological characteristics and typified for their fossil content, were used as highly effective stratigraphic markers (M1 to M5) that can be tracked for tens of kilometres across the basin. A facies‐controlled approach tied to a robust chronology (102 radiocarbon dates) reveals considerable deformation of laterally extensive nearshore (M1), continental (M2 and M3) and lagoon (M4 and M5) marker beds originally deposited in a horizontal position (M1, M4 and M5). The areas where antiformal geometries are best observed are remarkably coincident with the axes of buried ramp anticlines, across which new seismic images reveal substantially warped stratal geometries of Lower Pleistocene strata. The striking spatial coincidence of fold crests with the epicentres of historic and instrumental seismicity suggests that deformation of marker beds M1 to M5 might reflect, in part at least, syntectonically generated relief and, thus, active tectonism. Precise identification and lateral tracing of chronologically constrained stratigraphic markers in the ¹⁴C time window through combined sedimentological and palaeoecological data may delineate late Quaternary subsurface stratigraphic architecture at an unprecedented level of detail, outlining cryptic stratal geometries at the sub‐seismic scale. This approach is highly reproducible in tectonically active Quaternary depositional systems and can help to assess patterns of active deformation in the subsurface of modern alluvial and coastal plains worldwide.     

Spatial Breakdown Point of Variogram Estimators

In the context of robust statistics, the breakdown point of an estimator is an important feature of reliability. It measures the highest fraction of contamination in the data that an estimator can support before being destroyed. In geostatistics, variogram estimators are based on measurements taken at various spatial locations. The classical notion of breakdown point needs to be extended to a spatial one, depending on the construction of most unfavorable configurations of perturbation. Explicit upper and lower bounds are available for the spatial breakdown point in the regular unidimensional case. The difficulties arising in the multidimensional case are presented on an easy example in IR² , as well as some simulations on irregular grids. In order to study the global effects of perturbations on variogram estimators, further simulations are carried out on data located on a regular or irregular bidimensional grid. Results show that if variogram estimation is performed with a 50% classical breakdown point scale estimator, the number of initial data likely to be contaminated before destruction of the estimator is roughly 30% on average. Theoretical results confirm the previous statement on data in IR^d , d 1.     

新疆觉罗塔格韧性变形带组构及动力学意义

新疆觉罗塔格韧性变形带,惯称秋格明塔什-黄山韧性剪切带,发育于吐哈地块和中天山地块之间的EW向石炭系火山-沉积建造中,由一组走向EW、产状陡立的透入性片理组成。韧性变形带内韧性构造形迹发育,并可分为4个等级:大型构造、小型构造、微观构造和超微观构造。不同级别构造形迹的组构分析表明,觉罗塔格韧性变形带的内部组构是对称的,这意味着其成因于对称的构造变形。与主界面平行的大量压性构造形迹的产出,说明该对称组构成因于与垂直变形带(面)的共轴挤压作用,即觉罗塔格韧性变形带是一个韧性挤压带。      

A note on the relationship between dip-slip fault parameters and plate parameters in the two-dimensional modelling of preseismic deformation

Preseismic lithospheric deformation at a subduction zone can be modelled as dip-slip dislocation on an inclined fault or as flexure of a thin plate. Both these models predict a region of positive topography known as forebulge or outer rise. By matching the location and the magnitude of the forebulge, we derive useful relations between the dip-slip fault parameters and the plate parameters. In particular, we determine the width of a long dip-slip fault of given dip corresponding to a semi-infinite plate of given thickness. The displacement profiles of the two models are also compared.     

Progressive,episodic deformation in the Mexican Fold–Thrust Belt (central Mexico): evidence from isotopic dating of folds and faults

We used illite Ar/Ar dating to obtain absolute ages of folds and shear zones formed within the Mexican Fold–Thrust Belt (MFTB). The methodology takes advantage of illite dating in folded, clay-bearing layers and the ability to obtain accurate ages from small-size fractions of illite using encapsulated Ar analysis. We applied our approach to a cross-section that involves folded Aptian–Cenomanian shale-bentonitic layers interbedded with carbonates of the Zimapán (ZB) and Tampico–Misantla (TMB) Cretaceous basins in central-eastern Mexico. Basinal carbonates were buried by syn-tectonic turbidites and inverted during the formation of the MFTB in the Late Cretaceous. Results from folds and shear zones record different pulses of deformation within this thin-skinned orogenic wedge.

Mineralogical compositions, variations in illite polytypes, illite crystallite size (CS), and Ar/Ar ages were obtained from several size fractions in limbs and hinges of the folds and in the shear zones. 1M_d-illite polytype (with CS of 6–9 nm) dominates in two folds in the TMB while 2M₁-illlite (with CS of 14–30 nm) dominates in the third fold, in the ZB, and in the fold/shear zone. From west (higher grade) to east (lower grade): Ar retention ages indicate shearing occurred at ~84 Ma in the westernmost shear zone, folding at ~82 Ma in the ZB with subsequent localized shearing at ~77 Ma, and Ar total gas ages constrain the time of folding at ~64 Ma on the west side of the TMB and ~44 Ma on the eastern edge. These results are consistent with the age and distribution of syn-tectonic turbidites and indicate episodic progression of deformation from west to east.