青藏高原东北缘瑞利面波成像：射线理论与程函方程结果的比较

青藏高原东北缘是青藏高原隆升的前缘地带,其构造变形特征一直是研究的热点。前人在该区域进行过面波成像研究,但不同结果存在较明显的差异,可能与不同成像方法的分辨率有关,此次研究分别使用基于射线的方法和基于程函方程的方法进行了瑞利波相速度成像。笔者对比了20 s、30 s和60 s的成像结果,两种方法的结果表现出相似的速度特征。总体的速度特征与研究区域的主要构造单元分布相吻合,青藏高原东北缘表现出低速异常,鄂尔多斯块体表现出高速异常。在银川河套地堑,基于程函方程的成像在20 s和30 s得到更明显的低速异常,低速异常体的分布与地堑的轮廓吻合更好,说明基于程函方程的方法对数据利用更充分。     

Evaluation of urban underground space resources using a negative list method: Taking Xi’an City as an example in China

Utilization of urban underground space has become a vital approach to alleviate the strain on urban land resources, and to optimize the structure and pattem of the city. It is also very important to improve the city environment, build livable city and increase the capacity of the city. Based on the analysis of existing evaluation methods and their problems, a method for evaluating underground space resources based on a negative list of adverse factors affecting underground space development is proposed, to be primarily used in urban planning stages. A list of the adverse factors is established, including limiting factors, constraining factors and influencing factors. Taking Xi’an as an example, using a geographical information system platform, a negative list of adverse factors for the underground space resources in Xi’ an City are evaluated, and preventive measures are proposed. Natural resources, exploitable resources, and the potential growth of exploitable underground space resources are evaluated. Underground space assessment in the different development stages of the city, collaborative utilization and safety evaluation for multiple subsurface resources, environmental impact and assessment, as well as evaluation methods based on big data and intelligent optimization algorithms are all discussed with the aim of serving city planning and construction.     

层间隔震技术在地铁车辆段大平台上部土地开发上的应用研究

为开发北京地铁八王坟车辆段大平台上部空间,层间隔震技术被采用。通过非线性时程分析和模拟地震动振动台试验,研究了此层间隔震结构体系的抗震性能。研究结果表明采用隔震技术后,结构体系抗震性能得到很大提高,其地震响应满足规范要求。     

1951—2017年热带气旋移动速度特征统计分析

热带气旋移动速度是目前热带气旋研究热点之一。本文利用1951—2017年中国国家气象局最佳路径集资料,系统分析了西北太平洋海域热带气旋不同强度等级移动速度的年代际特征,初步探讨其原因,并对不同强度等级移动速度的分布特征进行系统诊断。结果表明,1951—2017年间平均移动速度(所有强度等级平均及对于大部分强度等级)呈现出减慢趋势,且主要体现在强热带气旋等级移动速度减慢;热带气旋向高纬度迁移趋势理论上将使移动速度增大而移动速度仍然减慢,说明气候因素是引起移动速度减慢的一个重要因素;不同强度等级平均移动速度、增强阶段基本相当,减弱阶段随强度减弱在初、中期明显增加,之后又逐渐减小,变性气旋移动速度显著增加;不同强度等级速度概率分布,增强阶段基本相同且相对集中,减弱阶段差异较大且相对分散,变性气旋最为分散。     

Non-invasive lab test in the monitoring of vadose zone contaminated by light non-aqueous phase liquid

We discuss a strategy capable of a quantitative long-term monitoring of water saturation and volume variation of light non-aqueous phase liquids in the soil. The goal was reached monitoring a controlled sand cell contaminated with classical gasoline over 124 days, using geophysical methods such as electrical resistivity tomography, induced polarization and ground penetrating radar. We show that empirical relations, linking the water saturation to the physical parameters measured as resistivity from electrical resistivity tomography and travel time from georadar with advanced processing, are good tools for this purpose. The consistence of the proposed process is validated by both good overlap of results carried out from electrical resistivity tomography and georadar and theoretical models simulating the actual experiment.     

Non-point source pollution estimation in the Pingqiao River Basin,China, using a spatial hydrograph-separation approach

For efficient and targeted management, this study demonstrates a recently developed non-point source (NPS) pollution model for a year-long estimation in the Pingqiao River Basin (22.3 km²) in China. This simple but physically reasonable model estimates NPS export in terms of land use by reflecting spatial hydrological features and source runoff measurements under different land-use types. The NPS export was separately analysed by a distributed hydrological model, a spatial hydrograph-separation technique, and an empirical water quality sub-model. Simulation results suggest that 57 890 kg of total nitrogen (TN) and 1148 kg of total phosphorus (TP) were delivered. The results, validated with observed stream concentrations, show relative errors of 23.3% for TN and 47.4% for TP. Countermeasures for urban areas (5.3% of total area) were prioritized because of the high contribution rate to TN (14.1%) and TP (26.2%) which is caused by the high degree of runoff (8.5%) and pollution source.     

STUDY ON FOCAL DEPTH OF THE MS5.4 CANGWU EARTHQUAKE IN GUANGXI

On July 31th, 2016, a magnitude 5.4 earthquake struck Cangwu Country, Guangxi Zhuang Autonomous Region, it was the largest earthquake recorded by Guangxi Seismological Network since it set up. The number of people affected by the earthquake had reached 20 000, and the direct economic losses caused by the earthquake were nearly 100 million Yuan. After the earthquake, USGS provided a global earthquake catalog showing that the focal depth of Cangwu earthquake was about 24.5km. However, the result given by the Global Centroid Moment Tensor showed the focal depth of this earthquake was 15.6km. However, the result obtained by Xu Xiaofeng et al. using CAP method was 5.1km. It was clear that the focal depths of Cangwu earthquake given by different institutions were quite different from each other. However, accurate focal depth of the earthquake has important significance for exploring the tectonic mechanism near the epicenter, so it is necessary to further determine the more accurate depth of the Cangwu earthquake. In order to further accurately determine the focal depth of Cangwu earthquake, we used the global search method for travel-time residual to calculate the focal depth of this earthquake and its error range, based on the regional velocity model, which is a one-dimensional velocity model of the Xianggui tectonic belt produced by the comprehensive geophysical profile. Then, we inverted the focal mechanism of this earthquake with the CAP method. Based on this, the focal depth of Cangwu M_S5.4 earthquake was further determined by the method of the Rayleigh surface wave amplitude spectrum and the sPL phase, respectively. Computed results reveal that the focal depth of this earthquake and its error range from the travel-time residual global search method is about(13±3)km, the focal depth inverted by CAP method is about 10km, the focal depth from sPL phase is about 10km, and the focal depth from Rayleigh surface wave amplitude spectrum is about 9~10km. Finally, we confirmed that the focal depth of Cangwu M_S5.4 earthquake is about 10km, which indicates that this earthquake still occurred in the upper crust. In the case of low network density, the sPL phase and Rayleigh wave amplitude spectrum recorded by only 1 or 2 broadband stations could be used to obtain more accurate focal depth. The focal depth's accuracy of Cangwu M_S5.4 earthquake in the USGS global earthquake catalog has yet to be improved. In the future, we should consider the error of the source parameters when using the USGS global earthquake catalog for other related research.     

VELOCITY CHARACTRISTICS OF SHANXI AND ADJACENT AREA AND ITS TECTONIC SIGNIFICANCE

In order to acquire a better velocity structure of the crustal and uppermost mantle beneath Shanxi area, we obtain the group and phase velocities of Rayleigh wave of the periods 8s to 50s in Shanxi and adjacent area using ambient seismic noise recorded at 216 broad-band stations. All available vertical-component time series for 2014 have been cross-correlated to yield estimates of empirical Rayleigh wave Green's function. Group and phase velocity dispersion curves for Rayleigh wave are measured for each interstation path by applying frequency-time analysis. It describes finer velocity structure of the crust and upper mantle in Shanxi, which reflects the geological structure characteristics at different depths. The resolution is within 50km and the resolution of part periods can reach 40km.The Rayleigh wave group and phase speed maps at short periods(8~18s and 10~22s)show clear correlations with shallow geological structures. Mountain areas on both sides of Shanxi depression zone show apparent high-velocity anomaly, except for low-velocity anomaly in the Taiyuan Basin, Linfen-Yuncheng Basin and Weihe Basin. Especially, the areas of Youyu County-Pianguan County-Kelan County-Shuozhou City and Jingle County-Lishi District of Lüliang City in Lüliang Mountains, and Yu County-Fuping County-Yi County and Yangcheng County-Licheng County in Taihang Mountains, present higher velocity anomaly. In addition, the velocity is lowest in the Weihe Basin, and the amplitude of low velocity decreases gradually from the south to the north of the basins in Shanxi, which probably is related to the process of gradual stretching and development of the Shanxi rift zone from the southwest to the northeast. The obvious velocity difference across the latitude of 38°N exists at 18~30s period of phase and 24~35s period of group velocity maps, which is probably related to the deep and shallow Moho depth variation in the south and north of Shanxi and the suture zone of ancient blocks including "hard" southern block and "soft" northern block. At the same time, the research result of receiver function reveals that partial melting of the lower crust occurs in the northern Taihang Mountains, while the southern section remains stable(Poisson's ratio is above 0.3 in the northern Taihang Mountains and 0.25~0.26 in the southern section). The phase velocity map at 30~50s period clearly shows NW velocity gradient belt, and the low velocity anomaly in the northeast side may be related to Cenozoic volcanism. Meanwhile, the eastern border of Ordos block is the western faults of central basins in Shanxi depression zone. However, some research results indicate that the above border is Lishi Fault in the surface, inferring that the Ordos block shows a shape of wide in the upper and narrow in the lower part from the surface to deep. The Datong volcanic area at 18~45s period of phase and 24~35s period of group velocity maps shows low velocity of trumpet shape from shallow to deep, related to the upwelling of hot material from lower mantle in the Cenozoic causing a large area of intense magmatic activity. It indicates the more specific upwelling channel of Datong volcanoes simultaneously.     

SOURCE PARAMETERS OF THE CANGWU MS5.4 EARTHQUAKE, 31 JULY, 2016

On July 31^st, 2016, an earthquake of M_S5.4 occurred in Cangwu County, Guangxi Zhuang Autonomous Region, which is the first M_S ≥ 5.0 earthquake in coastal areas of southern China in the past 17a. The moderate earthquake activities have come into a comparatively quiet period in coastal areas of southern China for decades, so the study about the Cangwu M_S5.4 earthquake is very important. However, differernt research institutions and scholars have got different results for the focal depth of the Cangwu M_S5.4 earthquake. For this reason, we further measured the focal depth by using CAP method and sPL phase method. sPL phase was first put forward by Chong in 2010. It is often observed between P and S wave of continental earthquakes with epicentral distance of about 30km to 50km. The energy of sPL phase is mainly concentrated on the radial component. Arrival time difference between sPL phase and direct P wave is insensitive to epicentral distancs, but increases almost linearly with the increase of focal depth. Based on these characteristics and advantages, sPL phase method is chosen to measure the focal depth of Cangwu M_S5.4 earthquake in the paper. First of all, we selected the broadband waveform data through seismic stations distributed mainly in Guangxi and adjacent provinces from Data Management Centre of China National Seismic Network and Guangxi Earthquake Networks Center. And an appropriate velocity model of Cangwu area was constructed by the teleseismic receiver function method. Then, the focal mechanism and focal depth of Cangwu M_S5.4 earthquake were determined by using the CAP(Cut and Paste)method. Next, we compared the synthetic waveforms simulated by F-K forward method of different focal depth models with the actual observed waveforms. According to the difference of arrival times between sPL and Pg phases, we finally obtained the focal depth of Cangwu earthquake. The results show that the focal depth is 11km measured by CAP method and 9km by sPL phase method. Based on the focal mechanism solution, isoseismal shapes, aftershocks distributions and investigation on spot, we conclude that the Cangwu M_S5.4 earthquake is a left-lateral strike-slip earthquake which occurred in the upper crust. Our preliminary analysis considers that the seismogenic structure of Cangwu earthquake is a north-northwest branch fault, and the control fault of this earthquake is the Hejie-Xiaying Fault.     

基于sPL震相测定山西地区的震源深度

本文利用sPL震相计算了山西及周边地区50 km之内的39次ML≥3.0地震的震源深度。结果显示:震源深度分布在6~30 km,优势震源深度为11~25 km,呈现出山西北部地震的震源深度比中、南部浅的趋势。将本文得到的39个地震的震源深度与中国地震台网中心统一编目的深度结果相比较,发现除极个别的地震事件外,两种方法得出的深度结果差值不大。