A rifted inside corner massif on the Mid-Atlantic Ridge at 5°S

The structure of the Mid-Atlantic Ridge at 5°S was investigated during a recent cruise with the FS Meteor. A major dextral transform fault (hereafter the 5°S FZ) offsets the ridge left-laterally by 80 km. Just south of the transform and to the west of the median valley, the inside corner (IC – the region bounded by the ridge and the active transform) is marked by a major massif, characterized by a corrugated upper surface. Fossil IC massifs can also be identified further to the west. Unusually, a massif almost as high as the IC massif also characterizes the outside corner (OC) south of the inactive fracture zone and to the east of the median valley. This OC massif has axis-parallel dimensions identical to the IC massif and both are bounded on their sides closest to the spreading axis by abrupt, steep slopes. An axial volcanic ridge is well developed in the median valley both south of the IC/OC massifs and in an abandoned rift valley to the east of the OC massif, but is absent along the new ridge-axis segment between the IC and OC massifs. Wide-angle seismic data show that between the massifs, the crust of the median valley thins markedly towards the FZ. These observations are consistent with the formation of the OC massif by the rifting of an IC core complex and the development of a new spreading centre between the IC and OC massifs. The split IC massif presents an opportunity to study the internal structure of the footwall of a detachment fault, from the corrugated fault surface to deeper beneath the fault, without recourse to drilling. Preliminary dredging recovered gabbros from the scarp slope of the rifted IC massif, and serpentinites and gabbros from the intersection of this scarp with the corrugated surface. This is compatible with a concentration of serpentinites along the detachment surface, even where the massif internally is largely plutonic in nature.     

连续小波变换在新疆地震活动周期分析中的应用

利用连续小波变换分析和研究了 1 970年 1月— 2 0 0 1年 1 2月新疆地区 30年来的地震活动情况。结果表明 ,新疆地震活动存在比较稳定的 1 0年左右活动周期 ,并存在 5年和 1 7年左右的不稳定的准活动周期 ,也就是说新疆地区地震活动既存在比较稳定的优势周期 ,也存在一定的时变性。根据 MS≥ 4.7地震时间序列的连续小波变换结果可推测 ,2 0 0 2— 2 0 0 5年新疆地区地震活动相对偏弱 ,中、强地震的发生次数偏少 ,有可能发生 5级或 6级地震 ,而到 2 0 0 6— 2 0 0 7年新疆有可能再次发生 7级左右的大地震。     

沃尔什变换在测井曲线分层中的应用研究

在岩性复杂的变质岩地区实施的大陆科学钻探，是通过采集井下不同深度岩石物理化学性质和物理场的各种数据，研究地壳特征及演化过程的各种科学问题。利用测井资料达到岩性剖面的重建是大陆科学钻探的重要目的之一。章利用沃尔什变换对钻孔岩性剖面进行分层，大重建的岩性剖面结果可以看出，该方法对于变质岩地区不同岩性的划分还是比较有效的。     

Inversion of receiver function by wavelet transformation

Introduction Receiver function has been extensively applied in studying S wave velocity of crust and up-per mantle for about 20 years (Owens, et al, 1987; LIU, et al, 1996), which is a time series ob-tained by the deconvolution of vertical component from horizontal component for teleseismic P waveform. Receiver function represents the teleseismic P plane wave response of crust and upper mantle beneath seismic station, from which the source and propagation effects are removed. Receiver funct…     

Laplace-transform analytic element solution of transient flow in porous media

A Laplace-transform analytic element method (LT-AEM) is described for the solution of transient flow problems in porous media. Following Laplace transformation of the original flow problem, the analytic element method (AEM) is used to solve the resultant time-independent modified Helmholtz equation, and the solution is inverted numerically back into the time domain. The solution is entirely general, retaining the mathematical elegance and computational efficiency of the AEM while being amenable to parallel computation. It is especially well suited for problems in which a solution is required at a limited number of points in space–time, and for problems involving materials with sharply contrasting hydraulic properties. We illustrate the LT-AEM on transient flow through a uniform confined aquifer with a circular inclusion of contrasting hydraulic conductivity and specific storage. Our results compare well with published analytical solutions in the special case of radial flow.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

Cyclic tests on large‐scale models of existing bridge piers with rectangular hollow cross‐section

Cyclic tests on two large‐scale models of existing bridge piers with rectangular hollow cross‐section were performed in the ELSA laboratory. The prototype structure is an existing reinforced concrete highway bridge constructed in Austria in 1975. The piers presented several seismic deficiencies and consequently they showed poor hysteretic behaviour and limited deformation capacity as well as undesirable failure modes that do not comply with the requirements of modern codes for seismic‐resistant structures. Experimental data are compared to numerical and empirical predictions. Copyright © 2003 John Wiley & Sons, Ltd.     

利用MATLAB实现图像处理与分析

本文通过对图像的均衡操作、二值图像的处理、小波去噪等实例，介绍了MATLAB进行图像处理和分析的实用方法与技巧，它对各种软钉包、进行图像处理和分析等，提供了高效便捷的方法。