云贵高原斜坡地带典型地下水富硫酸盐地区“越层找水”模式及其机理研究

地下水是中国西南云贵高原斜坡地带重要的饮用水源,其中黔中镇宁县北部存在大面积地下水中硫酸盐超标地区,导致了当地出现水质性缺水问题。本次研究通过岩相古地理分析、水化学分析、D、18O、34S同位素测试、岩样测试、岩心观察等技术手段,查明了研究区内地下水的补给源主要为大气降水,地下水中硫酸盐(SO_4~(2-))浓度在30～1100 mg/L,平均值为221.78 mg/L,呈现高度富集SO_4~(2-)的特点;在区域相对隔水层以上,不同类型地下水中SO_4~(2-)浓度大体具有机井上升泉下降泉溶潭地下河出口基岩裂隙泉表层岩溶泉的规律;探讨了地表水、地下水中SO_4~(2-)的来源,表层岩溶泉中硫酸根的来源主要为大气降水,高硫酸盐样品中硫酸根的来源主要为石膏溶解。在此基础上,结合钻井资料,掌握了研究区膏岩层分布及含水层结构特征,通过建立"越层找水"模式,采取下层低硫酸盐含水层,获取合格饮用水源,可有效解决当地水质性缺水问题。     

Nonplanar multi-modal vibrations of fluid-conveying risers under shear cross flows

Risers/pipes conveying fluid are a typical kind of slender structures commonly used in marine engineering. It is of great academic significance and application value for us to evaluate and understand the vibration characteristics and nonlinear responses of these risers under the combined action of internal and external fluid flows. In this paper, the nonplanar vibrations and multi-modal responses of pinned-pinned risers in shear cross flow are numerically studied. With this objective in mind, the van der Pol wake oscillators are used to simulate the dynamical behavior of the vortex shedding in the wake. Two nonlinear equations of motion of the riser are proposed to govern the lateral responses of the riser structure. The nonplanar nonlinear equations for the riser and wake are then discretized by employing Galerkin's method and solved by using a fourth-order Runge–Kutta integration algorithm. Theoretical results show that the coupled frequencies for cross-flow (CF) and in-line (IL) motions and the corresponding coupled damping ratio could be influenced by the external and/or internal fluid velocities. Based on extensive calculations, the dynamical behavior of the riser with various internal and external flow velocities are presented in the form of bifurcation diagrams, time traces, phase portraits, oscillation trajectories and response spectrum curves. It is shown that some interesting dynamical phenomena, such as ‘lock-in’ state, ‘figure-of-eight’ trajectory and quasi-periodic oscillation, could occur in such a fluid-structure interaction system. Our results also demonstrate that the shear parameter can significantly affect the dynamic responses of the riser. When the shear parameter of the cross flow is large, multi-modal quasi-periodic responses of the riser can be excited, showing some new features undetected in the system of fluid-conveying risers in uniform cross flow.     

Experimental study of deformable connection consisting of buckling‐restrained brace and rubber bearings to connect floor system to lateral force resisting system

This paper presents experimental and numerical studies of a full‐scale deformable connection used to connect the floor system of the flexible gravity load resisting system to the stiff lateral force resisting system (LFRS) of an earthquake‐resistant building. The purpose of the deformable connection is to limit the earthquake‐induced horizontal inertia force transferred from the floor system to the LFRS and, thereby, to reduce the horizontal floor accelerations and the forces in the LFRS. The deformable connection that was studied consists of a buckling‐restrained brace (BRB) and steel‐reinforced laminated low‐damping rubber bearings (RB). The test results show that the force–deformation responses of the connection are stable, and the dynamic force responses are larger than the quasi‐static force responses. The BRB+RB force–deformation response depends mainly on the BRB response. A detailed discussion of the BRB experimental force–deformation response is presented. The experimental results show that the maximum plastic deformation range controls the isotropic hardening of the BRB. The hardened BRB force–deformation responses are used to calculate the overstrength adjustment factors. Details and limitations of a validated, accurate model for the connection force–deformation response are presented. Numerical simulation results for a 12‐story reinforced concrete wall building with deformable connections show the effects of including the RB in the deformable connection and the effect of modeling the BRB isotropic hardening on the building seismic response. Copyright © 2016 John Wiley & Sons, Ltd.     

Reconstructing fluvial bar surfaces from compound cross‐strata and the interpretation of bar accretion direction in large river deposits

The interpretation of fluvial styles from the rock record is based for a significant part on the identification of different types of fluvial bars, characterized by the geometric relationship between structures indicative of palaeocurrent and surfaces interpreted as indicative of bar form and bar accretion direction. These surfaces of bar accretion are the boundaries of flood‐related bar increment elements, which are typically less abundant in outcrops than what would be desirable, particularly in large river deposits in which each flood mobilizes large volumes of sediment, causing flood‐increment boundary surfaces to be widely spaced. Cross‐strata set boundaries, on the other hand, are abundant and indirectly reflect the process of unit bar accretion, inclined due to the combined effect of the unit bar surface inclination and the individual bedform climbing angle, in turn controlled by changes in flow structure caused by local bar‐scale morphology. This work presents a new method to deduce the geometry of unit bar surfaces from measured pairs of cross‐strata and cross‐strata set boundaries. The method can be used in the absence of abundant flood‐increment bounding surfaces; the study of real cases shows that, for both downstream and laterally accreting bars, the reconstructed planes are very similar to measured bar increment surfaces.     

强震作用下铁路隧道横通道交叉结构抗震措施研究

依托四川茂县跃龙门铁路隧道工程,以主线单线隧道与横通道正交结构为研究对象,通过ABAQUS建立有限元分析模型。选取El-Centro地震波数据,通过应用扩展有限元理论,对横通道与主隧道交叉结构在最不利地震条件下的裂损进行研究,并提出减震层结合柔性接头的抗震措施。研究分析得到:减震层结合柔性接头的设置减小并抑制了交叉结构隧道在强震作用下的开裂范围。柔性接头的设置阻止了纵向裂缝的扩展,在交叉口处中部设置环向柔性接头能完全阻止交叉部位拱顶的裂缝生成;在初期支护和二次衬砌之间设置减震层,给予衬砌更大变形空间,使二次衬砌不易受初期支护变形受力影响而开裂。     

位温、等熵位涡与锋和对流层顶的分析方法

等熵位涡分析是位涡理论的分析基础。此文的目的是介绍等熵位涡分析所必需掌握的基本概念和方法。文中从位温和位涡、对流层和平流层、锋和对流层顶的基本性质出发,讨论了锋和对流层顶在剖面图、等压面图及等位温面（即等熵面）图上的特征。文中给出了各种分析实例图形,并通过分析和对比指出：平流层的高位涡是对流层顶以上位温随高度急剧增加位温垂直梯度特别大的结果;位温垂直梯度是决定位涡分布的主要因子;等熵位涡图主要反映极地气团的活动,同时也是与极地气团密切关联的锋、急流、对流层顶的综合反映。最后提出了等熵位涡分析中需要避免的一些错误认识,特别是不能将等位温面上的流线当成轨迹的错误,并由此得出平流层空气侵入对流层下部的错误推论。     

Interpretation of cosmogenic nuclides in meteorites on the basis of accelerator experiments and physical model calculations

Cosmogenic nuclides in extraterrestrial matter provide a wealth of information on the exposure and collision histories of small objects in space and on the history of the solar and galactic cosmic radiation. The interpretation of the observed abundances of cosmogenic nuclides requires detailed and accurate knowledge of their production rates. Accelerator experiments provide a quantitative basis and the ground truth for modeling cosmogenic nuclide production by measurements of the relevant cross sections and by realistic simulations of the interaction of galactic protons with meteoroids under completely controlled conditions, respectively. We review the establishment of physical model calculations of cosmogenic nuclide production in extraterrestrial matter on the basis of such accelerator experiments and exemplify this approach by presenting new experimental and theoretical results for the cosmogenic nuclide⁴⁴Ti. The model calculations describe all aspects of cosmogenic nuclide production and allow the determination of long-term solar and galactic cosmic ray spectra and a consistent interpretation of cosmogenic nuclides in extraterrestrial matter.     

一种自适应匹配子空间亚像元目标探测方法

为了克服基于线性混合模型的高光谱遥感影像亚像元目标探测方法的缺陷, 提出了一种基于全限制性线性分解的自适应匹配子空间探测方法。首先利用交叉相关光谱匹配技术求得各个像元所含端元类别信息, 然后根据端元类别信息和全限制性分解的结果构造自适应匹配子空间探测算子, 利用端元类别信息在探测中动态选择端元, 降低端元数目估计偏差对探测结果的影响, 提高探测器对目标与背景的可分性。实验证明, 该方法与其他基于线性混合模型的亚像元目标探测方法相比, 可以更好地克服端元数目估计偏差对探测结果的影响, 无论是端元个数低估还是     

地质剖面测制新方法的尝试——点坐标法

在区域地质调查中,地质剖面测制是一项必要的工作,而传统的导线法限制因素较多,质量和效率有待提高。在导线法的基础上,基于野外实践经验,提出了一种地质剖面测制新方法,即点坐标法。该方法的要点有:利用GPS获得地形控制点,以及分层、采样、产状、照相等位置的三维点坐标;构建一套函数公式,根据各点的三维空间坐标值,可计算获得点间平距、高差、方位角、坡度角等参数,从而投影绘制地质剖面图。该方法的主要优点有:不再需要测绳,可从人工测量记录转变为自动测量记录,实现了测量数据的数字化;避免了导线终点与实际终点不重合的情况;每一个分层点都有GPS坐标,便于野外复查。结合点坐标法测制地质剖面的实例证明,点坐标法较之导线法有多快好省的优点,值得在实际应用中广泛使用。     

Static and dynamic response of massive caisson foundations with soil and interface nonlinearities—validation and results

The static, cyclic, and dynamic response of a massive caisson foundation embedded in nonlinear layered or inhomogeneous soil and loaded at its top is investigated. The caisson is supported against horizontal displacement and rotation by four types of inelastic springs and dashpots, described with the BWGG model that was developed in the preceding companion paper [Gerolymos N, Gazetas G. Development of winkler model for static and dynamic response of caisson foundations with soil and interface nonlinearities. Soil Dyn Earthq Eng, submitted companion paper]. The prediction of the model is satisfactorily compared with results from 3D-finite element analysis. Some experimental corroboration of the method is provided with the help of a 1/3-scale lateral load test that had been conducted in the field by EPRI. An illustrative example of a caisson embedded in linearly-inhomogeneous clay and subjected to static and dynamic loading is analysed. Characteristic results are presented highlighting the role of soil inelasticity and its interplay with the two dominant interface nonlinearities: separation (gapping) of the caisson shaft from the surrounding soil, and uplifting of the base from the underlying soil.