东北地区农业结构转型时期土地利用变化的成因与效应

During the last decade of the 20th century, extensive conversion in agricultural land use took place in Northeast China. The goal of this study is to ascertain its spatial distribution and regional differentiation, determine its causes, and analyze its environmental impact, Especially we attempt to elucidate how institutional constraints have facilitated the change at a time of agrarian restructuring when newly emerging free market was hybridized with the former planned economy. Information on six categories of land use was mapped from interpretation of Landsat TM images recorded in 1990,1995 and 2000. Most of land use changes took place during the first half of the decade, coinciding with abrupt and chaotic changes in government directives. Farmland was changed mainly to woodland,water body and built-up areas while woodland and grassland were converted chiefly to farmland.Spatially, the change from farmland to woodland was restricted to the west of the study area. The change from grassland to farmland took place in the grazing and farming interlocked west. These chaotic and occasionally conflicting changes were largely caused by lack of stability and consistency in agricultural land use policies promulgated. They have exerted adverse impacts on the local environment, including land degradation, increased flooding, and modified climate regime.     

基于数字音频接口的地震数据采集电路板快速评估方法*

在宽频带数字地震观测技术领域,提出一种基于数字音频接口(S/PDIF接口)的数据采集电路板快速评估方法。该方法在数据采集电路设计过程中,在模拟/数字转换电路的输出端增加了一组S/PDIF数字音频接口,将模/数转换结果转换为符合音频传输标准的编码数据,并将此数据利用外置声卡同步传输到计算机,在计算机上进行数字抽取滤波、频谱分析等数据处理与解析,从而实现对地震数据采集电路板的快速评估。实验结果表明,该方法思路清晰,实现简便,结果有效可靠,能够解决常规测试评估方法中存在的问题,在高精度、高采样率数据采集技术研发和测试评估方面,具有比较强的实用性和应用前景。     

GPS技术在金川露天矿边坡变形监测中的应用

本文结合金川露天矿边坡变形GPS监测研究,主要论述监测基点的选择,基点WGS-84坐标的确定,变形监测网的布设,GPS数据采集、处理和质量,坐标转换的实施等,给出反演推出的若干四等三角点及其它控制点的变形数据,这些数据和造成变形的物理成因符合得很好,最后概括出GPS技术应用于变形观测的若干优点。     

Length‐mass models for some common New Zealand littoral‐benthic macroinvertebrates,with a note on within‐taxon variability in parameter values among published models

Regression models are developed and presented to predict dry mass (mg) from two linear dimensions (mm) for 17 benthic macroinvertebrate taxa common to littoral zones of New Zealand lakes. We also provide regression models to predict body length from head capsule width for the major insect taxa. Dry mass was best explained as a power function of all linear dimensions: M = aL _b .Parameters are presented in the log₁₀‐transformed linear form of this power function. Body length was a simple linear function of head capsule width for all insect taxa, hence parameters for these models are presented as untransformed values. We also provide family level models for the Chironomidae, and compare our chironomid body length‐mass model with other published Chrionomidae length‐mass models. There was a very high degree of variability in parameter values among published length‐mass models for the family Chironomidae (mean coefficient of variation for mass at length = 148%). We discuss the potential causes and implications of this variability.     

基于ERDAS的SPOT5卫星影像正射校正方法研究

海岛海岸带卫星遥感调查与评价项目以高分辨率卫星遥感影像数据为基础。项目区块地形有一半为山地和丘陵,地形起伏较大,常规的几何校正难以消除因地形起伏引起的影像几何变形,必须进行正射校正。根据现有数据特点和项目要求,提出了可行的正射校正流程,基于SPOT5物理模型对融合影像进行正射校正,实验校正结果完全满足精度要求。     

前板可旋转的双垂板结构水动力特性的理论研究

振荡水柱波能转换装置的最大转换效率往往受到腔内水柱共振机制的直接影响。通过对装置的基本结构进行简化,提出了一种前墙可绕固定轴旋转的双垂板式结构系统,旨在通过前墙的旋转运动进一步加剧水柱的振荡,从而对腔内水柱的共振机制进行调节和控制。基于线性波理论,采用匹配特征函数展开法对波浪与双垂板结构的相互作用进行理论研究,针对流场在结构物尖角附近的奇异性特征,将公共界面上的速度分布基于切比雪夫多项式近似展开,并应用区域间的速度与压力连续条件进行求解。通过分析结构的几何参数对反射透射系数、平均波面高程、前墙旋转振幅以及前墙与水面间相位差的影响,深究其共振机理,为振荡水柱波能转换装置的效率优化机制提供理论依据。结果表明,在所研究的波浪频率范围内,前墙的自由旋转运动会加剧板间的平均波面高程,应用于波浪能转换装置中能进一步拓宽高效频率带宽。     

黑潮延伸体上游中尺度涡场的年代际振荡及其相关机制

黑潮延伸体上游区域的中尺度涡场的涡动能和涡特征尺度存在显著地年代际振荡,和黑潮延伸体路径的年代际变化有很好的相关性。当黑潮延伸体路径比较稳定时,其上游区域涡动能比较高,涡特征尺度比较大,反之相反。通过对黑潮延伸体上游区域的中尺度涡场进行集合分析发现:当黑潮延伸体处于稳定状态时,上游涡场几乎是各向均匀地,有轻微的径向伸长;而当黑潮延伸体处于不稳定状态时,上游的中尺度涡场有显著地纬向伸长。对与中尺度涡场的产生相关的线性斜压不稳定和正压不稳定进行了计算分析,结果显示,线性斜压不稳定不是控制中尺度涡场年代际变化的机制,而正压不稳定对中尺度涡场的年代际变化有积极的贡献。不稳定产生的中尺度涡之间存在非线性涡-涡相互作用。     

A comparative study of energy performance of hydrostatic seafloor sediment samplers and a new high-efficiency sampler

The hydrostatic energy of high-pressure seawater is a renewable and green energy source for ocean exploration and have been used to replace underwater electrical energy transmission through the cable and underwater battery pack to power seafloor equipment. The advantage of the energy supply method is the cost-effective and the robustness. In the paper, the energy performance of the existing hydrostatic seafloor sediment samplers powered by seawater hydrostatic energy are modelled and analyzed and compared. In view of the common shortcoming of existing technology, a novel hydrostatic seafloor sediment sampler is proposed. The model of energy conversion of the new sampler is built, and its energy performance is obtained. The analysis results indicate that the energy conversion efficiency of the novel sediment sampler is much higher than the existing ones, which means that the new sampler can collect much longer sample with the limited amount of hydrostatic energy. The seawater hydrostatic energy conversion system of the new sampler can also be used to power other seafloor equipment.     

直驱式波浪能转换系统的研究和性能优化

A direct-drive wave energy conversion system based on a three-phase permanent magnet tubular linear generator （PMTLG） and a heaving buoy is proposed to convert wave energy into electrical energy. Sufficient experimental methods are adopted to compare the computer simulations, the validity of which is verified by the experiment results from a wave tank laboratory. In the experiment, the motion curves of heaving buoy are with small fluctuations, mainly caused by the PMTLG＇s detent force. For the reduction of these small fluctuations and a maximum operational efficiency of the direct-drive wave energy conversion system, the PMTLG＇s detent force minimization technique and the heaving buoy optimization will be discussed. It is discovered that the operational efficiency of the direct-drive wave energy conversion system increases dramatically after optimization. The experiment and optimization results will provide useful reference for the future research on ocean wave energy conversion system.     

On a near-optimal control approach for a wave energy converter in irregular waves

Real-time smooth reactive control and optimal damping of wave energy converters in irregular waves is difficult in part because the radiation impulse response function is real and causal, which constrains the frequency-dependent added mass and radiation damping according to the Kramers–Kronig relations. Optimal control for maximum energy conversion requires independent synthesis of the impulse response functions corresponding to these two quantities. Since both are non-causal (one being odd and other even), full cancellation of reactive forces and matching of radiation damping requires knowledge or estimation of device velocity into the future. To address this difficulty and the non-causality of the exciting force impulse response function, this paper investigates the use of propagating-wave surface elevation up-wave of the device to synthesize the necessary forces. Long-crested waves are assumed, and the approach is based on the formulations of Naito and Nakamura [2] and Falnes [22]. A predominantly heaving submerged device comprised of three vertically stacked discs driving a linear power take-off is studied. The overall formulation leads to smooth control that is near-optimal, given the approximations involved in the time-shifting of the non-causal impulse response functions and the consequent up-wave distances at which wave surface elevation is required. Absorbed power performance with the near-optimal approach is compared with two other cases, (i) when single-frequency tuning is used based on non-real time adjustment of the reactive and resistive loads to maximize conversion at the spectral peak frequency, and (ii) when no control is applied with damping set to a constant value. Simulation results for wave spectra over a range of energy periods and significant wave heights are compared for the three situations studied. While practical implementation presents engineering challenges, in terms of time-averaged absorbed power, unconstrained near-optimal control is found to perform significantly better than single-frequency tuning in the spectra with longer energy periods (>10 s for the present device), and somewhat better in the spectra with shorter energy periods (here ≤10 s).