江西省永平铜矿西部排土场极限堆载高度确定

国内外对排土场极限堆载高度的理论计算缺乏研究,目前尚无成熟的统一理论计算方法。文章结合永平铜矿西部排土场的工程实例,在进行边坡工程地质条件勘察与排土场岩土物理力学性质试验研究的基础上,采用数值计算方法对排土场进行了分层堆载数值模拟计算。通过对计算结果的分析,得到位移、塑性区与安全系数随堆载高度的变化规律,并确定了该排土场的极限堆载高度。     

一种直线特征标志的子像素定位方法

在近景摄影测量中,常常需要对直线特征的标志进行定位,而标志定位的精度会影响到整个测量的精度。不同特征的控制点标志,对应不同的识别方法,因此控制点标志的选择须根据不同的要求,进行综合研究分析。本文提出一种新的混合方法,首先采用Hough变换对直线特征标志进行直线检测,得到直线初值;然后采用灰度矩边缘直线拟合定位法,对标志点中心进行子像素定位。通过实验证明:经过Hough变换得到粗值的灰度矩边缘直线拟合定位法达到较高的定位精度,证明了该混合方法的有效性。     

“标贯”确定粘性土承载力标准值简易计算法

标准贯人（“标贯”）试验锤击数,要确定粘性土地基承载力标准值简易计算公式。将经杆长修正的标准贯人击数N进行统计分析,再把修正击数平均值带人相关方程,计算粘性土的承载力标准值fk,从而简化了计算过程。     

合肥市膨胀土试验研究

主要介绍合肥市二环路用生石灰,石膏改良膨胀土的室内试验研究,并根据试验资料说明生石灰、石膏改良膨胀土的效果。同时提出一种用生石灰一石膏改良合肥膨胀土的最佳配方。大量的试验结果表明,用该配方改良后的膨胀土其单轴抗压强度,水中稳定性、耐久性都有显著提高。经十几年来在合肥市二环路上应用效果良好。     

矿区控制网布网方案的选择

用计算机模拟法,讨论了控制网不同观测量的平差结果,提出了选择矿区控制网方案的原则.     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

地震综合效应场函数及其在地震预报中的应用──（一）地震综合效应场函数及其计算方法

在系统地分析了目前各种测震学地震预报方法科学思路的基础上,认为测震学地震预报方法基本上可以分为两大类。一类是以已经发生的一些地震作为未来可能发生的地震的“因”,即由于已经发生的地震对区域应力场的影响,导致未来发生较强地震。这一类包括的预报方法较多,如空区、条带、ｂ值、地震迁移、相关地震等等及其由此衍生出来的各种方法。另一类是把已经发生的一些地震作为区域应力场增强的“果”,即已经发生的地震是区域应力场增强过程中的一种反映,而未来地震不一定是已经发生的地震所导致的结果。这一类包括“地震窗口”、小震群活动等方法。针对第一类方法,各种预报方法都是力图从地震三要素中提取未来地震的信息,而具体作法又都是利用地震三要素这个多维空间的某个剖面。为了从地震活动诸要素的多维空间提取综合信息,我们对每个地震加入了破裂面方位,构成了地震第四要素,并依据地震４要素建立了地震综合效应场函数。地震综合效应场函数概括了多种测震学地震预报方法的科学思路和预报经验,从而可以形成测震学的综合预报方法。     

An integrable case of a rotational motion analogous to that of Lagrange and Poisson for a gyrostat in a Newtonian force field

The scope of the present paper is to provide analytic solutions to the problem of the attitude evolution of a symmetric gyrostat about a fixed point in a central Newtonian force field when the potential function isV ⁽²⁾.We assume that the center of mass and the gyrostatic moment are on the axis of symmetry and that the initial conditions are the following: (t ₀)=₀, (t ₀)=₀, (t ₀)=(t ₀)=₀, ₁(t ₀)=0, ₂(t ₀)=0 and ₃(t ₀)= ₃ ⁰ .The problem is integrated when the third component of the total angular momentum is different from zero (B ₁ 0). There now appear equilibrium solutions that did not exist in the caseB ₁=0, which can be determined in function of the value ofl ₃ ^r (the third component of the gyrostatic momentum).The possible types of solutions (elliptic, trigonometric, stationary) depend upon the nature of the roots of the functiong(u). The solutions for Euler angles are given in terms of functions of the timet. If we cancel the third component of the gyrostatic momentum (l ₃ ^r =0), the obtained solutions are valid for rigid bodies.     

The arrangement in mean elements space of the periodic orbits close to that of the Moon

In a simplified model of the Earth-Moon-Sun system based on the restricted circular 3-dimensional 3-body problem, it is possible to find numerically a set of 8 periodic orbits whose time evolutions closely resemble that of the Moon's orbit. These orbits have a period of 223 synodic months (i.e. the period of the Saros cycle known for more than two millennia as a means of predicting eclipses), and are characterized by a secular rotation of the argument of perigee . Periodic orbits of longer durations exhibiting this last feature are very abundant in Earth-Moon-Sun dynamical models. Their arrangement in the space of the mean orbital elements- for various values of the lunar mean motion is presented.