Design of dampers for structures based on optimal control theory

The aim of this paper was to propose a design guideline for using visco‐elastic dampers for the control of building structures subjected to earthquake loading as well as suspension roof structures subjected to wind loading. The active control algorithm was used to calculate the control forces. Based on the single‐mode approach the control forces were transformed to the forces which visco‐elastic dampers can provide. Application of the method to the design of the building structure with passive damping devices in the bracing system and to the suspension roof with dampers was studied. Through the application of optimal control theory a systematic design procedure to implement dampers in structures is proposed. Copyright © 2000 John Wiley & Sons, Ltd.     

Sliding mode fuzzy control: Theory and verification on a benchmark structure

A sliding mode fuzzy control (SMFC) algorithm is presented for vibration reduction of large structures. The rule base of the fuzzy inference engine is constructed based on the sliding mode control, which is one of the non‐linear control algorithms. In general, fuzziness of the controller makes the control system robust against the uncertainties in the system parameters and the input excitation, and the non‐linearity of the control rule makes the controller more effective than linear controllers. For verification of the present algorithm, a numerical study is carried out on the benchmark problem initiated by the ASCE Committee on Structural Control. To achieve a high level of realism, various aspects are considered such as actuator–structure interaction, sensor noise, actuator time delay, precision of the A/D and D/A converters, magnitude of control force, and order of control model. Performance of the SMFC is examined in comparison with those of other control algorithms such as H_{mixed 2/∞}, optimal polynomial control, neural networks control, and SMC, which were reported by other researchers. The results indicate that the present SMFC is efficient and attractive, since the vibration responses of the structure can be reduced very effectively and the design procedure is simple and convenient. Copyright © 2000 John Wiley & Sons, Ltd.     

XPZ-50型旋喷钻机的研制

介绍了XPZ－50型旋喷钻机的设计要求、主要技术参数、结构特点及生产模拟试验简况。     

一种QoS保证的容错拓扑控制算法

提出了一种QoS保证的容错拓扑控制算法,该算法能够构建干扰最小的K连通拓扑结构,并使任意节点间的最短(最小跳数)路径的干扰最小。仿真结果表明,在保持相同强度抗毁能力的同时,新的算法降低了网络中的干扰,更好地改善了网络的传输性能。     

港珠澳大桥首级控制网复测

介绍了港珠澳大桥首级控制网的复测方案,包括复测精度及网形设计、对控制网复测方法、技术要求及成果精度进行了介绍。最后,通过控制网复测成果和建网成果的比较,对首级控制网建网成果质量及控制点的稳定性进行了分析评价。     

EXCEL在高精度广东省第二次土地调查控制面积计算中的应用

行政区控制面积计算是第二次土地调查的一项重要工作。本文介绍了广东省第二次土地调查行政区控制面积计算的方法与生产过程,及各软件配合使用的情况、EXCEL的部分实用功能和运用EXCEL软件在本项目中计算、检查的一些应用案例和经验。     

连续运行参考站在市政工程测量中布设静态GPS控制网的应用

当使用网络RTK布设工程控制点很难达到预期的精度要求时,我们可以利用参考站高精度的坐标作为静态GPS网的起算点进行控制网布设。本文以北京某市政道路工程为例,介绍了使用这种方法布设GPS平面控制网的方法,并对控制网的精度进行分析。     

超高层建筑平面控制网竖向传递实践与研究

分析了超高层建筑平面控制网的建立及竖向传递的方法,介绍了数字正垂在测定超高层建筑倾斜偏差的具体应用,实现了用全站仪法和GPS法来检核控制网竖向传递的精度。     

GPS网中基准点的数量及位置分布对精度的影响分析

GPS网中,基准点的数量、组合方式及其分布位置都将影响到GPS网的定位精度,不合理的组合和分布方式也会影响GPS网固有的高精度。为了获取高质量的GPS定位成果,布设高等级控制网时必须要科学地选择基准点的数量及其分布,以便找到最佳组合方案。通过工程实例,分析了GPS网中基准点组合及分布方法,得出了相关结论。     

全球定位系统（GPS）现代化运行控制段（OCX）的进展与现状

主要介绍了美国全球定位系统（GPS）和欧洲伽利略（Galileo）计划的组成部分,着重研究分析了两个系统控制段的现状。随着现代化GPS的到来,传统的GPS控制段已经不能满足GPSIII星座的需求。现代化的GPS运控段（OCX）应运而生,新增加的系统功能保证了GPSIII更优良的可用性和完好性,并且预计在2014年前逐步取代传统的GPS控制段。