静态精密单点定位精度分析

阐述了精密单点定位技术的应用价值,分析了观测数据和精密钟差采样间隔对静态精密单点定位的影响,提供了工程实际使用有益的参考.     

南海北部深水盆地沉积-构造的差异性及其油气意义

南海北部深水区自西向东依次分布着琼东南盆地、珠江口盆地、台西南盆地等新生代被动陆缘盆地,这些盆地经历了大致相当的从裂陷到坳陷的构造演化史,但在张裂活动过程中存在着明显的沉积-构造的差异性。构造沉降特征分析显示:在同一构造带上自西向东有盆地主要构造沉降发生的时段逐步变晚的趋势;在不同构造带上自北向南有盆地主要构造沉降发生的时段逐步变晚的趋势。这种沉积-构造的差异性对烃源岩的发育类型、分布及生储盖组合等方面有明显的控制作用,表现为:裂谷期构造沉降幅度大的盆地,陆相烃源岩发育,以陆生陆储陆盖型成藏组合为主;裂后期构造沉降幅度大的盆地,海相烃源岩发育规模较大,海生海储海盖型成藏组合及混生海储海盖型生储盖组合所占分量逐渐增多。推测渐新统湖相-湖沼相及海陆过渡相源岩和中新统海相烃源岩应是南海北部深水区油气的主要来源,陆生海储海盖型、海生海储海盖型及混生海储海盖型生储盖组合应是深水区基本生储盖组合类型。     

基于最小二乘配置的三维空间坐标转换

在求解未知转换参数时,鉴于公共点坐标本身的误差,提出利用最小二乘配置法进行空间坐标转换,即将公共点本身坐标作为随机参数,把转换参数作为非随机参数进行处理,最后通过实验对比分析表明,该方法明显优于一般坐标转换方法。     

GPS精密单点定位的数据处理方法综述

在GPS精密单点定位数据处理中,通常采用基于非差观测值的处理方法。然而精密单点定位也可通过观测值不同差分组合以减少某些未知参数,且在理论上与非差模型等价。文中介绍基于非差和差分模型的精密单点定位的几种数据处理方法,并对各种模型进行比较。     

基于MODIS数据的雪面温度遥感反演(英文)

On the basis of simplification of the Planck function in a low temperature range, this paper revises the practical split-window algorithm and presents a method for retrieving snow surface temperature （Ts） based on MODIS data in the middle-latitude region. The application of this method in Qinghai Lake region reveals that it is feasible for the retrieval of Ts. Results of correlation analysis indicate that there was strong negative relationship between Ts and altitude. By analyzing three typical areas in which land cover was relatively homogenous, this paper discusses the relationship between Ts and normalized difference snow index （NDSI） and then presents a new concept named ＂NDSI-Ts space＂.     

K-L变换与NDBI指数法提取ASTER影像城市用地信息的比较

运用K-L变换和NDBI(Normalized Difference Barren Index)指数法,对试验区--沧州市及其周边地区的ASTER遥感影像进行处理,然后分别对两种方法处理后的图像采用最小距离法监督分类,提取城市用地信息,并对分类后的图像进行对比,结果表明:NDBI指数法对城市用地信息提取的效果较好.     

Analysis of a rigid footing lying on three-layered soil using the finite difference method

A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff.     

Traction image method for irregular free surface boundaries in finite difference seismic wave simulation

In this study, we propose a new numerical method, named as Traction Image method, to accurately and efficiently implement the traction-free boundary conditions in finite difference simulation in the presence of surface topography. In this algorithm, the computational domain is discretized by boundary-conforming grids, in which the irregular surface is transformed into a 'flat' surface in computational space. Thus, the artefact of staircase approximation to arbitrarily irregular surface can be avoided. Such boundary-conforming gridding is equivalent to a curvilinear coordinate system, in which the first-order partial differential velocity-stress equations are numerically updated by an optimized high-order non-staggered finite difference scheme, that is, DRP/opt MacCormack scheme. To satisfy the free surface boundary conditions, we extend the Stress Image method for planar surface to Traction Image method for arbitrarily irregular surface by antisymmetrically setting the values of normal traction on the grid points above the free surface. This Traction Image method can be efficiently implemented. To validate this new method, we perform numerical tests to several complex models by comparing our results with those computed by other independent accurate methods. Although some of the testing examples have extremely sloped topography, all tested results show an excellent agreement between our results and those from the reference solutions, confirming the validity of our method for modelling seismic waves in the heterogeneous media with arbitrary shape topography. Numerical tests also demonstrate the efficiency of this method. We find about 10 grid points per shortest wavelength is enough to maintain the global accuracy of the simulation. Although the current study is for 2-D P-SV problem, it can be easily extended to 3-D problem.