黄河三角洲沿岸及邻近海区细粒沉积物中的碳酸盐

本文用X-射线衍射法直接计算了来自黄河三角洲沿岸及邻近海区80个沉积样的细粒组分(<2μm)中的碳酸盐含量。计算结果与全样的容量法分析结果基本一致。研究结果表明,本区细粒沉积物中碳酸盐含量变化受沉积物来源、海区水动力作用、海底地貌特征和碳酸盐的地球化学行为等因素所影响。     

Numerical Simulation of Residual Circulation due to Bottom Rouglmess Variability Under Tidal Flows in A Semi-Enclosed Bay

Nowadays there are some chronic serious environmental problems, such as eutrophication, blue tide and so on, in a complicated coastal zone or a semi-enclosed bay, because the water exchanges between an inner bay and an outer sea is weak compared with the supply of contaminant. Under this situation, a method to improve the water quality by 3-dimensional small unsymmetrical structures has been proposed by Komatsu et al. In this paper, several numerical simulations of the tidal current and concentration for various arrangements of bottom roughness in a semi-enclosed model bay are carfled out with a depth-averaged 2-D numerical model. The model is solved by the hybrid finite analytic method with nonstaggered grid. And the SIMPLES algorithm with Rhie and Chow＇ s momentum interpolation technique is used for the simulation. The effect of Komatsu＇ s method for water purification is examined by numerical simulation. The result of numerical experiment indicates that it is possible to generate a new tidal residual current and to activate a tidal exchange by bottom roughness arrangement only.     

A Computational Model for Velocity Separation in Shallow Sea

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th     

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

Analysis of Mixing of Pollutants in Water Waves and Currents

A vertical two-dimensional turbulence numerical model for the interaction of waves and currents is developed in the paper based on the nonlinear two-equation k-ε model with the VOF method.The one-dimensional equivalent advection velocity and equivalent mixing coefficient are defined and the solving process is introduced:The pollutant concentration field,generated by an instant source in waves and currents,is calculated with the model,and then the equivalent advection velocity and equivalent mixing coefficient are obtained by calculating the time derivative of the mean and variance of pollutant concentration probability distribution.The effects of wave period and wave height on the equivalent mixing coefficient for waves and wave-currents are also investigated.     

Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.     

A model of the formation and development of ocean shear wave

Ａｍｏｄｅｌｏｆｔｈｅｆｏｒｍａｔｉｏｎａｎｄｄｅｖｅｌｏｐｍｅｎｔｏｆｏｃｅａｎｓｈｅａｒｗａｖｅ￥ＱｉａｏＦａｎｇｌｉａｎｄＺｈａｎｇＱｉｎｇｈｕａ（ＦｉｒｓｔＩｎｓｔｉｔｕｔｅｏｆＯｃｅａｎｏｇｒａｐｈｙ，ｓｔａｔｅｏｃｅａｎｉｃＡｄｍｉｎｉｓ...     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

不同软基处理方法适用性比较

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。     

东营城区高精度三维地震采集方法研究

根据东营城区内建筑物较多，环境干扰较大，地下构造复杂，断裂非常发育，目的层埋藏深，资料信噪比较低的特点，以地震老资料和钻井资料为基础，建立地震地质模型，利用射线追踪技术选取合适的观测系统参数。充分利用卫星数字地图，没计了灵活多变的观测系统，采用可控震源与炸药震源配合使用方法，及时对城区内地下面元的覆盖次数、方位角和炮检距的分布进行质量监控，利用现场处理系统对资料进行及时分析，提高了地震资料品质。所获得的东营城区高精度三维地震采集资料显示，其浅中层分辨率和中深层信噪比都有了明显改善，取得了良好的地质效果。