风暴期间黄河水下三角洲波浪变形

为确定适用黄河三角洲的波动理论，对黄河三角洲风暴期间及前后波浪连续观测资料进行了处理，将其投在komar波浪理论分区图中后，分析了风暴期间黄河水下三角洲波浪的波形特征，发现站位所在地适合的波浪理论主要为艾里波和斯托克斯波，风暴期间波浪变形，还存在少量超过极限波陡线的波浪，通过比较常见的极限波陡线，看出Miche曲线比较适合该研究区。     

An Analysis on Limit Load for Corroded Submarine Pipelines

1 .Introduction Submarine pipelines are one of the safest and the least environmentally disruptive means for ma-rine gas or oil transport . With the development of exploitation of submarine oil or gas ,the safety ofsubmarine pipelines has becomethe major …     

赤道西太平洋大气边界层的诊断分析

利用１９９３年ＥＮＳＯ事件爆发（４月）前酝酿时期“热带大洋与全球大气－海洋耦合响应试验”强化观测阶段“向阳红五号”科学考察船１５５°Ｅ，２°Ｓ定点海洋气象和高空大气探测资料，分析了赤道西太平洋大气边界层特征。结果表明：赤道西太平洋上空辐合对流区边界层内也有等温或逆温层存在，大气边界层物理参数变化与大尺度海－气变异有密切关系，赤道太平洋沃克环流加强、东移，边界层上部逆温层出现概率明显增大，边界层内高湿层湿度减小。另外，边界层内实测风速、风向廓线随高度的变化基本上不服从Ｅｋｍａｎ规律，但由其平均，分量合成得到的平均风随高度的变化却基本符合Ｅｋｍａｎ规律。     

超过例外氧暴露时限的空气巡回潜水实验中若干生理功能的观察

17名潜水员安全地进行了55人次超过美国海军例外氧暴露时限1.5—3倍的空气巡回潜水实验。生理功能观察和肺活量测定结果表明,在水深70m以浅,潜水员均保持了相当好的智力和操作能力,在连续3d 3倍氧暴露时限的巡潜后期,只有3人肺活量下降,且在次日测定时已见恢复,表明上述暴露是安全的。美国海军例外氧暴露时限中对于70m以浅空气暴露的相应规定显得保守。     

滇西地区地壳上地幔电性结构与地壳构造活动的关系

本文根据滇西地区18个大地电磁测深点资料的数据处理和分析结果,对测区深部导电率在纵、横向上的变化特征进行了研究。结果表明:滇西地区深部电性为多层结构,大致可分四至五个电性结构层;深部电性结构横向变化大,明显受区域构造控制;该区上部地壳内普遍存在低阻层;上地幔高导层明显存在两个隆起区,一个以剑川—鹤庆为中心呈北北西向展布的隆起区,另一个以腾冲—潞西为轴呈南北向展布的隆起区。 本文还讨论了地壳上地幔电性结构与大地构造的关系,滇西北裂陷区盆地的形成,以及该区地震活动与深部构造的关系     

Accuracy assessment of lidar-derived digital elevation models

Despite the relatively high cost of airborne lidar-derived digital elevation models (DEMs), such products are usually presented without a satisfactory associated estimate of accuracy. For the most part, DEM accuracy estimates are typically provided by comparing lidar heights against a finite sample of check point coordinates from an independent source of higher accuracy, supposing a normal distribution of the derived height differences or errors. This paper proposes a new methodology to assess the vertical accuracy of lidar DEMs using confidence intervals constructed from a finite sample of errors computed at check points. A non-parametric approach has been tested where no particular error distribution is assumed, making the proposed methodology especially applicable to non-normal error distributions of the type usually found in DEMs derived from lidar. The performance of the proposed model was experimentally validated using Monte Carlo simulation on 18 vertical error data-sets. Fifteen of these data-sets were computed from original lidar data provided by the International Society for Photogrammetry and Remote Sensing Working Group III/3, using their respective filtered reference data as ground truth. The three remaining data-sets were provided by the Natural Environment Research Council's Airborne Research and Survey Facility lidar system, together with check points acquired using high precision kinematic GPS. The results proved promising, the proposed models reproducing the statistical behaviour of vertical errors of lidar using a favourable number of check points, even in the cases of data-sets with non-normally distributed residuals. This research can therefore be considered as a potentially important step towards improving the quality control of lidar-derived DEMs.     

Laser probe Ar/Ar dating: History and development from a technical perspective

The ⁴⁰Ar/³⁹Ar method using a laser probe opened the door to microscale measurements and diffusion profiles frozen in samples. In the first decade since the initial application of a laser for ⁴⁰Ar/³⁹Ar dating in 1973, practical applications have been few. This is due not only to the fact that the laser and vacuum technologies were immature but that mass spectrometry was also in its infancy. In those days, the sensitivity of a mass spectrometer was generally insufficient to measure the small amount of argon degassed from a geological sample by a laser. These problems have subsequently been solved by new technologies. To understand their current status, a brief history of their development is outlined. This outline focuses on the required detection limit in micro scale measurement, practical approaches for accurate measurement are explained through examples in our laboratory specifically relating to the technical aspects of ⁴⁰Ar/³⁹Ar dating.     

河南黄淮平原土壤中Cu的生态安全评价

在分析河南黄淮平原土壤和小麦籽实中Cu含量分布特征的基础上,利用单项污染指数法对研究区小麦籽实中Cu的污染状况进行评价。其结果为：研究区小麦籽实中Cu的单项污染指数Pi的平均值为0．473,说明研究区小麦籽实未受Cu的污染。Cu的状况良好。进一步讨论了土壤中Cu的含量与小麦籽实中Cu含量间的关系。认为小麦籽实中Cu的积累与土壤中的总Cu无明显的相关关系,而与土壤中的有效态Cu含量具有明显的相关性。据此,将土壤有效态Cu作为土壤Cu生态安全评价的指标。并建立了小麦籽实Cu与土壤有效Cu的响应关系模型,确定了土壤中有效Cu的安全界限值。     

人工边坡潜在滑动面研究——以广州科学城某人工高边坡为例

运用强度参数的改变对边坡破坏面形迹影响不明显这一特点,在数值模拟过程中通过改变岩体强度参数,有效地获取潜在滑动面的位置和形态,较好地解决了滑动面搜索的难题。将该法应用于广州科学城某人工高边坡稳定性的研究,在三维数值模拟过程中,将强度参数大幅度折减,计算后获得各剖面的剪应变增量图,从这些图中可获得潜在滑动面。这与人们通常将此类边坡的中风化面作为滑动面存在较大差别。将该滑动面运用极限平衡法进行计算,计算结果显示各剖面的安全系数基本都大于1.2,边坡稳定但仍需要加固处理,与三维数值模拟结果相一致。由此认为用这种分析法确定出的潜在滑动面合理、计算结果可靠,可作为搜索边坡潜在滑动面并计算安全系数的方法之一。     

Estimation of statistical parameters for censored lognormal hydraulic conductivity measurements

Field tests of hydraulic conductivity (e.g., injection test, pumping test, etc.) in low permeability formations are subject to censoring due to the detection limit of the instruments used. An iterative method of estimating the mean and variance of hydraulic conductivity data with a presumed log-normal distribution function is presented. This method accounts for the data that are actually below the lower detection limit (called truncated data) and thus gives distribution parameters that are more representative for the underlying distribution. The proposed method is then tested on two simulated normally distributed random datasets having different variances. The results show that the means and variances estimated by the proposed method are very accurate. Finally, the method is used to estimate the mean and variance of hydraulic conductivity data from single hole water injection tests in a fractured geological formation.