用叠加谱比法研究新疆地区Lg尾波Q值的区域性变化

运用叠加谱比法,对分布于新疆地区的5个台站所记录的51个地震数据进行分析,得出与各射线路径相对应的Lg尾波Q0(Lg尾波在1Hz处的Q)值。结果表明:Q0值呈现出明显的区域性变化特点,与构造活动关系紧密。在较为稳定的塔里木地台,Q0呈现出高值,在350～450之间。在南部构造活动较为激烈的昆仑褶皱系,Q0呈现出较低的值,约为200～250。在构造活动最为激烈的帕米尔地区,Q0值在170～200之间。在北部的天山褶皱系,Q0值约为220～270。准葛尔褶皱系比天山褶皱系的Q0值略高,约为260～290。     

Understory and small trees contribute importantly to stemflow of a lower montane cloud forest

Stemflow (Sf) measurements in tropical rain and montane forests dominated by large trees rarely include the understory and small trees. In this study, contributions of lower (1‐ to 2‐m height) and upper (>2‐m height and <5‐cm diameter at breast height [DBH]) woody understory, small trees (5 < DBH < 10 cm), and canopy trees (>10‐cm DBH) to Sf per unit ground area (Sf_a) of a Mexican lower montane cloud forest were quantified for 32 days with rainfall (P) during the 2014 wet season. Rainfall, stemflow yield (Sf_y), vegetation height, density, and basal area were measured. Subsequently, stemflow funneling ratios (SFRs) were calculated, and three common methods to scale up Sf_y from individual trees to the stand level (tree‐Sf_y correlation, P‐Sf_y correlation, and mean‐Sf_y extrapolation) were used to calculate Sf_a. Understory woody plants, small trees, and upper canopy trees represented 96%, 2%, and 2%, respectively, of the total density. Upper canopy trees had the lowest SFRs (1.6 ± 0.5 Standard Error (SE) on average), although the lower understory had the highest (36.1 ± 6.4). Small trees and upper understory presented similar SFRs (22.9 ± 5.4 and 20.2 ± 3.9, respectively). Different Sf scaling methods generally yielded similar results. Overall Sf_a during the study period was 22.7 mm (4.5% of rainfall), to which the understory contributed 70.1% (15.9 mm), small trees 10.6% (2.4 mm), and upper canopy trees 19.3% (4.4 mm). Our results strongly suggest that for humid tropical forests with dense understory of woody plants and small trees, Sf of these groups should be measured to avoid an underestimation of overall Sf at the stand level.     

The effect of expansion ratio on the critical Reynolds number in single fracture flow with sudden expansion

Flow in a single fracture (SF) is an important research subject in groundwater hydrology, hydraulic engineering, radioactive nuclear waste repository and geotechnical engineering. An abruptly changing aperture is a unique type of SF. This study discusses the relation between the values of the critical Reynolds number (Re_c) for the onset of symmetry breaking of flow and the expansion ratio (E) of SF, which is defined as the ratio between the outlet (D) and inlet (d) apertures. This study also investigates the effect of inlet aperture d on Re_c for flow in an SF with abruptly changing apertures (SF‐ACA) using the finite volume method. Earlier numerical and experimental results showed that flow is symmetric in respect to the central plane of the SF‐ACA at small Reynolds number (Re) but becomes asymmetric when Re is sufficiently large. Our simulations show that the value of Re_c decreases with the increasing E, and the relationship between the logarithm of Re_c and E can be described accurately using either a quadratic polynomial function or a logarithmic function. However, the relationship of Re_c and d for a given E value is vague, and Re_c becomes even less sensitive to d when E increases. This study also reveals that the hydraulic gradient (J) and flow velocity (v) follow a super‐linear relationship that can be fitted almost perfectly by the Forchheimer equation. The inertial component (J_i) of J increases monotonically with Re, whereas the viscous component (J_v) of J decreases monotonically with Re. The Re value corresponding to equal inertial and viscous components of J (named as the transitional point Re) decreases when E increases, and such a transitional point Re should be closely related to the critical Reynolds number Re_c, although a rigorous theoretical proof is not yet available. Copyright © 2015 John Wiley & Sons, Ltd.     

A new approach to estimate canopy evaporation and canopy interception capacity from evapotranspiration and sap flow measurements during and following wetting

Canopy interception and its evaporation into the atmosphere during irrigation or a rainfall event are important in irrigation scheduling, but are challenging to estimate using conventional methods. This study introduces a new approach to estimate the canopy interception from measurements of actual total evapotranspiration (ET) using eddy covariance and estimation of the transpiration from measurements of sap flow. The measurements were conducted over a small‐scale sprinkler‐irrigated cotton field before, during and after sprinkler irrigation. Evaporation and sap flow dynamics during irrigation show that the total ET during irrigation increased significantly because of the evaporation of free intercepted water while transpiration was suppressed almost completely. The difference between actual ET and transpiration (sap flow) during and immediately following irrigation (post irrigation) represents the total canopy evaporation while the canopy interception capacity was calculated as the difference between actual ET and transpiration (sap flow) during drying (post irrigation) following cessation of the irrigation. The canopy evaporation of cotton canopy was calculated as 0.8 mm, and the interception capacity was estimated to be 0.31 mm of water. The measurement uncertainty in both the non‐dimensional ET and non‐dimensional sap flow was shown to be very low. Copyright © 2015 John Wiley & Sons, Ltd.     

Parallelized combined finite-discrete element (FDEM) procedure using multi-GPU with CUDA

This paper focuses on the efficiency of finite discrete element method (FDEM) algorithmic procedures in massive computers and analyzes the time-consuming part of contact detection and interaction computations in the numerical solution. A detailed operable GPU parallel procedure was designed for the element node force calculation, contact detection, and contact interaction with thread allocation and data access based on the CUDA computing. The emphasis is on the parallel optimization of time-consuming contact detection based on load balance and GPU architecture. A CUDA FDEM parallel program was developed with the overall speedup ratio over 53 times after the fracture from the efficiency and fidelity performance test of models of in situ stress, UCS, and BD simulations in Intel i7-7700K CPU and the NVIDIA TITAN Z GPU. The CUDA FDEM parallel computing improves the computational efficiency significantly compared with the CPU-based ones with the same reliability, providing conditions for achieving larger-scale simulations of fracture.     

运用ENVI实现SPOT-5卫星影像的RVI提取

运用ENVI软件处理长沙地区的SPOT-5影像,将全色影像和多波段影像进行融合,分析融合后的影像,再选择感兴趣区域进行影像裁剪;采用ENVI的波段运算(Band3/Band2)提取该地区比值植被指数并进行分析。结果表明:比值植被指数对植被覆盖率较高的区域有非常高的敏感度;在植被覆盖率小于50%的时候,其敏感度明显降低,在绿色植被覆盖区域的比值植被指数远大于1,在裸露地表、建筑物、水体等没有植被覆盖区域的比值植被指数则在1附近,而比值植被指数大于2的则出现在高覆盖健康绿色植被上。     

基于颜色迁移的单极化SAR图像伪彩色增强

本文从颜色信息角度出发,提出了一种基于颜色迁移的单极化SAR图像彩色增强方法。该方法通过伪彩色编码将SAR图像变为过渡彩色图像,运用保持细节的颜色迁移方法在颜色迁移的过程中保留SAR图像的细节信息,用改变各通道系数的方式进行色调调整使得SAR图像与光学图像有着相同的颜色信息,并通过实验证明该方法的有效性。     

中国海洋卫星及应用进展

中国十分重视海洋遥感及其监测技术的发展,初步形成了具有优势互补的海洋遥感观测体系,并发挥了显著的经济和社会效益。其中,海洋一号(HY-1A/B)卫星已经广泛应用于中国海温预报业务系统、冬季海冰业务监测、夏季赤潮和绿潮监测、海岸带动态变化监测、近岸海水水质监测和渔业遥感监测等方面。海洋二号(HY-2A)卫星不仅填补了中国海洋动力环境卫星遥感的空白,也是目前国际上唯一在轨运行的集主被动微波遥感器于一身的综合型海洋动力环境卫星,具备同时获取风场、有效波高、海面高度和海面温度的能力。通过卫星获得的数据提高了中国海洋环境监测与灾害性海况预报的水平,为国民经济建设和国防建设、海洋科学研究、全球变化研究等提供了可靠的遥感数据,同时还在国际对地观测体系中发挥了重要作用,受到国内外用户的高度认可。海洋一号和海洋二号卫星系列为中国建立完善的海洋环境立体监测体系奠定了坚实基础。根据国家发展和"一带一路"建设的实施,在加快建设海洋强国、维护海洋权益和加快发展海洋经济的进程中对海洋遥感的发展也进一步提出了更高的要求和更紧迫的需求。为此,紧紧围绕国家海洋强国战略需求,在《国家民用空间基础设施中长期发展规划(2015年—2025年)》中专门规划了海洋观测卫星系列,服务于中国的海洋资源开发、环境保护、防灾减灾、权益维护、海域使用管理、海岛海岸带调查和极地大洋考察等方面,同时兼顾陆地和大气观测领域的需求。在充分继承已有HY-1A/B、HY-2A、高分三号(GF-3)和中法海洋卫星(CFOSAT)成功研制经验和应用成果的基础上,发展多种光学和微波遥感技术,建设新一代的海洋水色卫星和海洋动力环境卫星,具备卫星组网观测能力;发展海洋监视监测卫星,构建优势互补的海洋卫星综合观测体系。通过空间基础设施的建设,海洋遥感卫星必将在建设海洋强国的进程中发挥出重要作用。     

A note on “Origin of components in Chilean thermal waters” by

Risacher et al. (2011) have presented voluminous data on thermal waters of Chile that is quite appreciable; however, their work still falls short on several counts. The most notable shortcoming of the work is the presentation and treatment of data. The interpretations are based on questionable premises (viz., extent of seawater intrusion) and considerations (viz., using average chemical composition of rock types for geochemical modeling, considering volcanic rocks as the only rock type in contact with the geothermal fluids) and assumptions not always substantiated by facts (with proper references) could have been corroborated. Use of Cl/Br ratio for discrimination purpose is unconvincing, considering the uncertainty in the measurement of low (<1 mg/L) Br concentration.