大陆碰撞造山带的两类橄榄岩——以柴北缘超高压变质带为例

论述了大陆俯冲碰撞带中地幔橄榄岩的基本特征和成岩类型,并重点讨论柴北缘超高压变质带中不同性质的橄榄岩及其成因。根据岩石学特征,我们确定柴北缘超高压带中发育有两种类型的橄榄岩:(1)石榴橄榄岩,岩石类型包括石榴二辉橄榄岩、石榴方辉橄榄岩、纯橄岩和石榴辉石岩,是大陆型俯冲带的标志性岩石。金刚石包裹体、石榴石和橄榄石的出溶结构、温压计算等均反映其来源深度大于200km。地球化学特征表明该橄榄岩的原岩是岛弧环境下高镁岩浆在地幔环境下堆晶的产物。(2)大洋蛇绿岩型地幔橄榄岩,与变质的堆晶杂岩(包括石榴辉石岩、蓝晶石榴辉岩)和具有大洋玄武岩特征的榴辉岩构成典型的蛇绿岩剖面,代表大洋岩石圈残片。这两类橄榄岩的确定对了解柴北缘超高压变质带的性质和构造演化过程有重要意义。     

Statistical analysis of sand grain/bed collision process recorded by high-speed digital camera

A high‐speed digital camera was employed to record the sand grain/bed collision process. With image processing and a statistical method, a series of parameters of the collision process were obtained. The results show that the collision process of a grain with rebounding can be represented by two parameters: the kinetic energy restitution coefficient and the collision angle. Both parameters satisfy a normal distribution, and they are dependent on one another. With an increase of the collision angle, the distribution of the kinetic energy restitution gradually reduces from a broad to a narrow range with low values. The percentage of vertical velocity restitution coefficients greater than 1 can reach 70% or more, which ensures that the settling time of the sand grains in the air increases and that they receive more energy from the air to progress the saltation movement.     

Comparative Analysis of International Energy Consumption Characteristics and China's Countermeasures

With the rise of low carbon economy and the deterioration of the international energy situation, most countries in the world pay more attention to energy issues. In this paper, based on a comparison with several countries of large energy consumption, we used long sequence statistics to analyze the energy consumption characteristics from the world and the history, including energy consumption, energy consumption structure and energy efficiency, and then summed up the characteristics of energy consumption in developed countries, analyzed China's energy consumption process and the current stage, and found out the main problems of energy consumption in China. At last, countermeasures for the healthy development of China's energy were proposed, including actively promoting scientific and technological progress, upgrading energy structure, developing low carbon economy, rationalizing energy prices, improving the proportion of clean energy consumption and emphasizing synergistic effect on environment protection.     

康古尔塔格缝合带的变形机制

北天山东段康古尔塔格带是晚古生代塔里木板块和准噶尔板块碰撞的结果。它是一条复杂的、强烈的高应变带．并具有独特的变形机制、应变序列以及构造变形。本文运用构造－地层研究方法对该碰撞带的构造特征加以分析和研究。     

纳米比亚欢乐谷地区斑状花岗岩成因及构造背景

对纳米比亚欢乐谷地区斑状花岗岩进行系统的地球化学及 Sr--Nd 同位素研究,并对其岩石成因及构造意义进行了讨论。结果表明,该斑状花岗岩为高钾钙碱性-钾玄岩系列的准铝质花岗岩; 岩石富碱、轻稀土和 Ｒb、Th、U、K、Pb 等大离子亲石元素,贫 Nb、Ta、Ti、Zr、Hf 等高场强元素,具有中等铕负异常。岩石锶初始值为 0. 715 61 ～0. 722 07,εNd( t) 为 －13. 9 ～ －12. 7,Nd 同位素模式年龄为2 025 ～2 153 Ma。揭示欢乐谷地区斑状花岗岩为同碰撞 S 型花岗岩,主要来源于古老地壳物质的重熔,是 Kalahari 克拉通和 Congo 克拉通碰撞造山的产物。     

新疆白干湖钨锡矿区岩心钻探施工技术

随着西部大开发及国家三五八工程的开展,新疆昆仑山脉高海拔无人区成为地质找矿的重点,如何提高昆仑山脉钻孔钻探施工的效率,是当前岩心钻探施工的重点。通过白干湖钨锡矿岩心钻探的施工情况论述了该工程的施工经验和方法。     

京津冀水资源利用多效率指标的变化特征比较

提高水资源利用效率,缓解用水压力,是解决京津冀缺水问题的有效措施,对各行业用水效率历史状况的全局把握有助于未来政策的调整.论文比较了京津冀三地的万元GDP用水量、万元工业增加值用水量、管网漏损率、人均日生活用水量、污水处理率、作物水分利用效率共6项指标组成的综合用水效率,分析了 2002-2017年京津冀用水效率的Ma...     

孑遗植物四合木(Tetraena mongolica)异地保护条件下的气候生物学特征与光合效率

为了廓清异地保护条件下孑遗濒危植物四合木(Tetraena mongolica)的气候生物学特征、光合生理生态适应性及生境适宜性,应用1971—2011年的地面气象资料进行了不同试验区的气候生物图解与分析,测定了四合木及其伴生种白刺(Nitraria tangutorum)的叶片气体交换参数及光合效率。结果表明:①四合木自然分布区(内蒙古乌海地区)与异地保护区的气候生物学特征存在明显分异;②当年种植的四合木实生苗的生长量大小依次为:乌海四合木核心区实生苗鄂尔多斯实生苗阿拉善实生苗;③自然条件下,5个处理的净光合速率(Pn)依次为阿拉善移植的四合木成株(24.05±1.68μmol·m-2·s-1)乌海客土栽培的四合木(19.97±1.05μmol·m-2·s-1)乌海栽培的四合木实生苗(18.96±1.04μmol·m-2·s-1)鄂尔多斯栽培的四合木实生苗(16.64±0.92μmol·m-2·s-1)阿拉善栽培的四合木实生苗(16.48±0.13μmol·m-2·s-1);异地保护试验区栽培的四合木实生苗的Pn没有明显差异(p≥0.05),即原生境条件下栽培的四合木实生苗的Pn较高。同时,异地保护栽培四合木实生苗中,鄂尔多斯栽培的四合木实生苗的Pn阿拉善栽培的四合木实生苗。从四合木光合作用特征中的Pn、蒸腾速率、气孔导度和胞间CO2浓度、气候生物学特征和生长量等综合研究结果可以推断,从原生境区东移的实生苗迁地保护,使四合木具有更高的生理生态适宜性和环境适应性。     

舟山海域淡水资源调查岩心钻探技术

舟山海域淡水资源调查项目DZS1孔,水深15 m、钻孔深度达202.1 m,在以粘土层和砂层为主的第四系覆盖层全孔取心、在风化基岩层取心2 m。在第四系覆盖层不下套管直接利用φ127 mm钻具进行绳索锤击取心钻探,基岩采用φ127 mm钻具作为套管、φ50 mm钻具单动双管回转取心钻探。介绍了该孔的主要施工工艺与质量控制方法,包括勘探船抛锚定位、潮汛对钻杆的影响、钻探取心过程控制、用取心钻头不取心扫孔技术、更换钻头技术、泥浆工艺等。