Recent ventifact development on the central Oregon coast,western USA

The unusual location of ventifacts, on a boulder‐built jetty at the mouth of the Siuslaw River, Oregon coast, western USA, allows ventifact age and wind abrasion rates to be estimated with some precision. The jetty was built mainly between 1892–1901 and extended throughout the twentieth century. Consideration of historical shoreline position and the history of jetty construction and repair suggests the ventifacts have formed since about 1930. Morphologically the ventifacts are aligned south‐to‐north reflecting winter winds and sediment transport from the adjacent beach. Wind‐parallel grooves and ridges with sharp, sinuous crests are developed on inclined boulder surfaces on top of the jetty and reflect suspended sand transport in wind vortices. Deeply pitted surfaces on steep boulder surfaces nearest the beach reflect impact by saltating sand grains. Based on present wind regimes (1992–2000) from three regional weather stations, southerly winds above the sand transport threshold occur for 21·9–29·6 per cent of the time. Based on estimated depth of loss from boulder surfaces, wind abrasion rates are calculated to be on the order of 0·24–1·63 mm a^?1. This is the first well‐constrained field estimate of ventifact age and ventifaction rate from a modern coastal environment. Copyright © 2003 John Wiley & Sons, Ltd.     

Evolution and inheritance of a rock coast: western Galicia,northwestern Spain

There is increasing evidence that shore platforms and other elements of rock coasts may be inherited, at least in part, from interglacial stages when sea level was similar to today's. Most of this evidence, which includes ancient beaches and datable terrestrial deposits, has been obtained from areas of resistant, slowly eroding rock, where the platforms often appear to be much too wide to have developed since the sea reached its present level. It is much more dif?cult to demonstrate that inheritance has occurred in areas of weaker rock, which generally lack any datable material. The coast of western Galicia in northwestern Spain has shore platforms in igneous and metamorphic rocks that were deeply weathered during the Tertiary. These platforms are closely associated with ancient beaches from the last interglacial stage, and associated periglacial and ?uvio‐nival deposits that covered and fossilized most of the Eemian platforms and cliffs during the late middle and late Weichselian glacial stage. The sedimentary processes and the thickness and facies of the sediments were determined by the height, aspect and gradient of the coastal mountains, and their distance from the coast. Radiocarbon dating, sedimentary analysis and platform morphology indicate that the shore platforms of Galicia have been inherited from at least the last interglacial stage. They were fossilized in places beneath thick Weichselian deposits and then exhumed during the Holocene transgression. The abundant evidence for inheritance in Galicia has important implications for other coasts in fairly weak rocks where such evidence is generally lacking. Copyright © 2003 John Wiley & Sons, Ltd.     

Formation of Concentric Rings Around Sources

Zones of increased concentration formed by a solvent flowing from a source are considered. A matehmatical model for forming such zones is proposed. It takes into account that such a zone is composed of a set of independent particles. Hence the distribution of a substance around the source can be explained by movement of an individual particle. In the model this movement is a continuous semi-Markov process with terminal stopping at some random point in space. Parameters of the process depend on the velocity field of the flow. Forward and backward partial differential equations for the distribution density of a random stopping point of the process are derived. The forward equation is investigated for the centrally symmetric case. Solutions of the equation demonstrate either a maximum or a local minimum at the source location. In the latter case a concentric ring around the source is formed. If different substances vary in their absorption rates, they can form separable concentration zones as a family of concentric rings.     

Architecture of fault zones determined from outcrop, cores, 3-D seismic tomography and geostatistical modeling: example from the Albalá Granitic Pluton, SW Iberian Variscan Massif

The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.     

Copper-Polymetal Metallogenic Series and Prospecting Perspective of Eastern Section of Gangdise

Geological, geophysical, geochemical and remote sensing comprehensive studies show that big ore-prospecting potentiality is contained in the eastern section of the Gangdise Mountains, Tibet.There are various mineralization types with dominant types of porphyry and exhalation. According to their relations with tectonic evolution, they are divided into four kinds of metallogenic series as follows:magnmtic type (Cr, Pt, Cu, Ni) and exhalation type (Cu, Pb, Zn, Ag) ore deposit series related to Neo-Tethys oceanic crust subduction action (125-96 Ma); epithermai type (Au, Ag, Pb, Zn, Sb), altered fractured rock type (Cu, Mo) and skarn rock type (Cu) ore deposit series related to arc-continental collision; porphyry type (Cu, Mo), cryptoexplosion breccia type (Cu, Au, Pb, Zn), shear zone type (Au, Ag, Sb) and skarn rock type (Cu, Fe) ore deposit series with relation to post-orogenic extensional strike-slip. From subductive complex to the north, zoning appears to be crystallization differentiation type (segregation type)-shear zone type (altered rock type)-skarn rock type, epithermai type-porphyry type-porphyry type and exhalation type-exhalation type-hydrothermai filling-replacement type.The ore deposit is characterized by multi-places from the same source, parity and multi-stage, hypabyssal rock from the deep source and poly genetic compound as a whole.     

A millennial-scale record of Holocene tsunamis on the Kronotskiy Bay coast, Kamchatka, Russia

Deposits from as many as 50 large tsunamis during the last 7000 years are preserved on the Pacific coast of the Kamchatka Peninsula near the mouth of the Zhupanova River, southern Kronotskiy Bay. These deposits are dated and correlated using Holocene marker tephra layers. The combined, preserved record of tsunami deposits and of numerous marker tephras on Kamchatka offers an unprecedented opportunity to study tsunami frequency. For example, from the stratigraphy along southern Kronotskiy Bay, we estimate frequency of large tsunamis (>5 m runup). In the last 3000 years, the minimum frequency is about one large tsunami per 100 years, and the maximum about one large tsunami per 30 years; the latter frequency occurred from about 0 to 1000 A.D. This time interval corresponds to a period of increased seismicity and volcanic activity that appears to be recorded in many places on the Kamchatka Peninsula.     

长白山天池火山区长白-敦化剖面结晶基底的探测和研究

时间项分析法中，应用广义最小二乘法进行反演，对长白山天池火山区岩浆系统的长白—敦化(L1)剖面的Pg波到时进行了计算处理，得到了Pg波时间项及基底速度值；取上部地壳的介质平均速度为4．5km/s，经反演求得了各点的深度值，给出了长白山天池火山区结晶基底的厚度分布。结晶基底厚度一般在2．0km左右，而在长白山天池下方结晶基底最厚处接近4．0km；在万宝和敦化附近各有一不太明显的凹陷，其原因可能与在这两个位置处有几条断裂穿过有关。     

海原断裂带西段断层泥的分形研究

利用光学和电子显微镜研究了海原断裂带西段断层泥的粒径分布，５微米至１厘米的粒径段，断层泥具有自相似特征，断层面的粘滑摩擦的特征位移参数可由分维上限（约１厘米）确定。同时用分形理论分析了断层泥粒度分重量百分比的分形结构特征，探讨了粒度成分分维值与断层运动特征的关系。     

新疆及邻区强震发生的深部条件与坚固体孕震模式的新证据

根据新疆及其邻近地区地壳，上地幔三维结构的最新研究结果，联系这个地区的强震震源分布、剖析强震孕良，发生的深部构造特征，结果表明：该区浅源强震与中原强震的震源均位于地壳或上地幔速度结构横向，纵向非均匀性较明显的地区，且位于相应层内的高速扰动区或高低速过渡带中，从而有力一证明了“坚固体孕震模式”的合理性。