Wave runup on a concentric twin perforated circular cylinder

The regular wave interaction with a twin concentric porous circular cylinder system consisting of an inner impermeable cylinder and an outer perforated cylinder was studied through physical model and numerical model studies. The experiments were carried out on the twin concentric cylinder model in a wave flume to study the wave runup and rundown at the leading and trailing edges of the perforated cylinder. It was found that the maximum wave runup on the perforated cylinder is almost same as the incident wave height. The experimental results were used to develop the predictive formulae for the wave runup and rundown on the perforated cylinder, which can be easily used for design applications. The wave runup profiles around the perforated cylinder for different values of ka and porosities were studied numerically using Green's Identity Method. The results of the numerical study are presented and compared with the experimental measurements.     

0516号热带风暴过程分析

利用气象海洋数据资料和卫星遥感图片,分析研究了2005年第16号热带气旋"韦森特"(VICENTE)的特征,从最先的初始扰动到自身环流的分裂发展重组过程,以至当时周围相对应的大气环流,发现该热带气旋活动过程具有很多特性。对其移动过程进行的综合分析表明,只要存在合适距离等一定有利的条件,弱的两个涡旋之间完全可以发生强的作用力,高空辐散场的抽气作用对气旋的发展有极好的作用,所得的结论可对今后的预报提供一些启示和参考。     

河口变形效应与涌潮的形成

作者采用非线性潮波方程,假定河口的宽度B(x)和深度h(x)是任意可微函数,导出了涌潮发生的条件,并讨论了各种变形情况下涌潮的形成。得出结论是,在涌潮形成过程中起决定作用的是浅水非线性效应,而河口变形效应则是起促进作用的。     

江苏省主要湖泊的降水量与湖泊的降水效应

本文分析了江苏境内主要湖泊的降水量特征,揭示了长江是江苏各湖泊不同降水量特征的一条十分明显的天然界线;估算了太湖的降水效应,并据此推估出江苏主要湖泊的降水效应不太明显;江苏各湖泊的降水量与其水位年过程趋势相似,只是后者位相滞后于前者而已。     

东南亚10°—25°N,105°—130°E海区热带风暴异常路径的分析

本文４１ａ（１９４９－１９８９年）的资料，对东南亚１０°－２５°Ｎ，１０５°－１３０°Ｅ范围７－９月出现的热带风暴异常路长进行了普查统计和气候分析。结果表明：产生异常路径热风暴的机率约占区域内热带风暴总数的２０％；异常路径的产生与热带风暴所处的地理位置，季节，环下等因素有关。正确地考虑气候规律和具体的天气条件相结合是预报带式风暴异常路径成败的关键。     

西太平洋暖池区热带波动的天气效应

为了探讨西太平洋暧地区热带波动的天气效应，利用1980年2－9月140°E日本静止卫星纬度时间剖面卫星云图，分析了5d和14d左右周期热带波动云的演变特征，井综合分析了14d周期的云系演变型式与流场的关系，为预报热带中期天气变化规律提供了依据；热带波动中30－60d大气低频振荡的云量变化最显著，北半球夏半年热带波动的天气压主要在10°N－0°，各半年在10°N－10°S，超过这个区域热带云量的港分布型式就有明显的变化。     

渤海湾盆地沙河街组钙质超微化石古生态及沉积环境

渤海湾盆地沙河街组中钙质超微化石的发现,表明这一时期渤海湾盆地与海水有过联系。对钙质超微化石古生态及沉积环境研究表明,化石主要产出时代为始新世晚期至渐新世早中期,属“间冰期”亚热带气候型。这一问题的深入研究,对于渤海湾盆地的石油勘探有重要意义。     

Experimental study of the breaking limit of multi-directional random waves passing over an impermeable submerged breakwater

This study investigates experimentally the breaking wave height of multi-directional random waves passing over an impermeable submerged breakwater. Experiments have been conducted in a three-dimensional wave basin equipped with a multi-directional random wave generator. A special type of wave gauge has been newly devised to record the water surface elevations in the breaker zone as accurately as possible. The records are analyzed to estimate the location and limit of wave breaking. Comparisons have also been made with the results of regular waves. The influence of the incident wave conditions on the breaking wave height normalized by the breakwater dimensions has been investigated. Empirical formulae have been presented to estimate the breaking limit of multi-directional random waves based on the experimental records. The formulae have been tested and found to work well not only for multi-directional random waves, but for regular waves as well.     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.