Une méthode de quantification de la dégradation d'un escarpement de faille au cours des cycles climatiques du Quaternaire : la faille de Jobourg (Nord Cotentin,France)Quantification of a fault-scarp degradation through Quaternary: the Jobourg fault (North Cotentin,France)

The degradation of the Jobourg fault-scarp occurred by cryoclastic processes in a periglacial environment during a part of Quaternary time. An attempt of quantification indicates a bulk scarp erosion of about 39 m³ m^?2, while the head accumulated at the bottom of the fault scarp only represents 4.6 m³ m^?2. To cite this article: M. Font et al., C. R. Geoscience 334 (2002) 171–178.     

Recycling in the Puerto Rican mantle wedge, Greater Antilles Island Arc

Abstract The initial volcanic phase of Cretaceous island arc strata in central Puerto Rico, at the eastern end of the extinct Greater Antilles Arc, comprises a 6‐km thick pile of lava and volcanic breccia (Río Majada Group). Preserved within the sequence is a conspicuous shift in absolute abundances of the more incompatible elements, including Th, Nb, and the light rare earth elements (LREE: La, Ce, Pr and Nd). The compositional shift is marked by a decrease in La/Sm from averages of 2.11 in the lowest third of the pile (Formation A) to 1.48 at the top (Formation C), and by a distinctive flattening of LREE segments of chondrite‐normalized REE patterns. i⁸⁷Sr/⁸⁶Sr and ?_Nd average about 0.7035 and 8.2, respectively, in early Formation A basalts. These ranges normally overlap samples from later Formations B and C. Isotope compositions of the latter group are more variable, however, and several samples are considerably more radiogenic than Formation A basalts, such that i⁸⁷Sr/⁸⁶Sr averages almost 0.7042 while ?_Nd‐values decrease to 7.5 in Formation B and C basalts. Theoretical models of non‐modal melting processes in both amphibole peridotite and spinel lherzolite sources provide insight into the origin of depleted Th, Nb, and LREE abundances in Puerto Rican basalts. Low Nb concentrations less than normal mid‐oceanic ridge basalts in Formation A basalts indicate the wedge was slightly depleted by low‐volume decompression fusion due to induced convection in the back‐arc region prior to entry of the source into the arc melting zone. However, depleted patterns in Formation C basalts cannot be generated by relatively greater degrees of decompression fusion in the back‐arc, because addition of the La‐enriched slab‐derived component to more depleted source material invariably produces elevated rather than decreased La/Sm. Refluxing of Formation A harzburgitic residua is similarly precluded. In contrast, the observed patterns are readily reproduced by multistage melting models involving hybridized sources containing normal Formation A lherzolite source material blended with recycled, unrefluxed harzburgite residua. Successful models require hybrid sources containing large volumes of recycled harzburgite (up to 50%) during generation of Formation C basalts. Slightly elevated radiometric Sr and Nd isotopes in a few flows from Formation C are attributed to partial refluxing of the hybrid sources within the wedge.     

Counting chronology and climate records with about 1000 annual layers of a Holocene stalagmite from the Water Cave in Liaoning Province, China

One active stalagmite from the Water Cave in Liaoning Province contains growth layers of three sizes. Based on thermal ionization mass spectrometry 230Th dating, we found that middle size layers are annual layers, with each middle layer consisting of one narrow dark layer and a wide bright layer. The small layers within middle layers are sub-annual layers and the large layers are multi-year layers. Based on the layer-counting method, we established a high-resolution time scale for layer thickness. Our results reveal two dramatic century-scale climate cycles over the past 1000 years in this region.     

Reconstruction of the climate in the Tianmu Mountain area, Zhejiang Province, in the last 160 years by ? 13C sequence of tree ring α-cellulose

Based on cross-dating tree rings from the Tianmu Mountain, Zhejiang Province, the tree rings α-cellulose δ 13C time series was measured. By spectrum analysis, the variation of tree-ring δ13C sequence shows a quasi periodicity of 4.4 years, which is coincident with the standard cycle of El Nino. After removing the long-term decrease trend of the δ13C variation related to atmospheric CO2 concentration, the response of the δ13C to climate elements was analyzed using meteorology data from a nearby weather station. The results suggest that there is a distinct relativity between high-frequency variation of tree ring δ 13C series and seasonal climate parameters, e.g. Temperature and precipitation, with a significant time-lag effect. In addition, the high frequency also reflects the strength change of the East Asian Monsoon. The multiple regression method was employed to reconstruct the historical climate, and to analyze the climate change and trend in the last 160 years in the northern Zhejiang Province.     

MODIFIED MASS FLUX CUMULUS CONVECTIVE PARAMETERIZATION SCHEME AND ITS SIMULATION EXPERIMENT—PART Ⅰ:MASS FLUX SCHEME AND ITS SIMULATION OF THE 1991 FLOOD EVENT*

Based on the existing cumulus convective parameterization schemes,a mass flux scheme (MFS) for cumulus convective parameterization has been successfully developed by reference to the work of Chen et al. (1996).The MFS is a comprehensive scheme.In MFS,not only the importance of the large-scale moisture convergence is taken into account,but also it includes the cumulus updrafts and downdrafts,cumulus-induced subsidence in the environmental air.entrainment,detrainment and evaporation.The interaction between the cumulus and the environment is described by using a one-dimensional bulk model.At the same time the scheme includes the penetrative and shallow convections.The MFS has been successfully incorporated into the regional climate model RegCM2 developed by NCAR.The new model has been applied to simulate summer monsoon characteristics and their variations of heavy rainfall process in the Changjiang-Huaihe River Basins for three months from May to July 1991.The results show that the new model can successfully simulate this rainfall prolonged process.By comparising the model outputs of RegCM2.using the Kuo scheme and the MFS.it is found that the MFS is better in simulating the surface temperature,rainfall position and amount,and rainfall duration.     

Effective stress analyses of liquefaction-induced deformation in river dikes

A series of effective stress analyses is carried out on the seismic performance of river dikes based on the case histories during the 1993 Hokkaido-Nansei-oki and 1995 Hyogoken-Nambu earthquakes in Japan. Seven case histories selected for the analyses involve a crest settlement ranging from none to 2.7 m in the dikes 3–6 m high with evidence of liquefaction at foundation soil. The effective stress model used is based on a multiple shear mechanism and was developed by one of the authors. The soil parameters are evaluated based on the site investigation and laboratory test results. The results of the analyses are basically consistent with the observed performance of the river dikes. In particular, the effective stress model shows a reasonable capability to reproduce the varying degree of settlements depending on the geotechnical conditions of foundation soils beneath the dikes. The analyses also indicate that the effect of a cohesive soil layer mixed with the liquefiable sand layers beneath the dikes can be a primary factor for reducing the liquefaction-induced deformation of dikes.     

Seismic analysis of base-isolated liquid storage tanks using the BE–FE–BE coupling technique

A three-dimensional soil–structure–liquid interaction problem is numerically simulated in order to analyze the dynamic behavior of a base-isolated liquid storage tank subjected to seismic ground motion. A dynamic analysis of a liquid storage tank is carried out using a hybrid formulation, which combines the finite shell elements for structures and the boundary elements for liquid and soil. The system is composed of three parts: the liquid–structure interaction part, the soil–foundation interaction part, and the base-isolation part. In the liquid–structure interaction part, the tank structure is modeled using the finite elements and the liquid is modeled using the internal boundary elements, which satisfy the free surface boundary condition. In the soil–foundation interaction part, the foundation is modeled using the finite elements and the half-space soil media are modeled using the external boundary elements, which satisfy the radiation condition in the infinite domain. Finally, above two parts are connected with the base-isolation system to solve the system's behavior. Numerical examples are presented to demonstrate the accuracy of the developed method, and an earthquake response analysis is carried out to demonstrate the applicability of the developed technique. The properties of a real LNG tank located in the west coast of Korea are used. The effects of the ground and the base-isolation system on the behavior of the tank are analyzed.     

钢筋砼摩擦耗能支撑框架结构的单元刚度和力学模型分析

为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。钢筋砼摩擦耗能支撑单元由支撑杆单元和钢板—橡胶摩擦耗能器单元组成 ,支撑单元可取空间杆单元 ,摩擦耗能器单元为平面应力矩形单元。摩擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线 ,根据耗能器单元的力学模型 ,可确定其在每一时刻的刚度 ;框架结构空间杆单元的恢复力模型采用双线型模型 ,根据杆单元的力学模型 ,可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支撑框架在地震作用下进行了弹塑性反应时程分析 ,结果表明耗能支撑框架的顶层最大位移明显小于普通框架     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

中全新世以来黑龙江同江地区的孢粉组合与植被、气候演化

对黑龙江省同江县96－QP剖面从下至上划分4个孢粉组合带：1是以蒙古栎－桦属－蒿属－苔草属－木本科－水龙骨科为主组合带；2是以蒿属－莎草科－禾本科－桦属－栎属为主组合带；3是以桦属－蒙古栎松属－蒿属－莎草科－禾本科为主组合带；4是以松属－桦属－蒙古栎－蒿属－苔草属为主组合带。这4个孢粉组合带清楚地反映了古植被，古气候演替4个阶段；依次为温性落叶阔叶林－针，阔叶混交林→以落叶阔叶树稍多的针、阔叶混交林－草原→以松占优势的针、阔叶混交林。其气候变化是温暖湿润－温和略干－温和略湿－温凉湿润。