Evolution of sand waves in the Messina Strait, Italy

In the present paper the morphodynamics of sand waves in the Messina Strait, Italy, is analysed by comparing data gathered during two different surveys carried out in 1991 and 2001, respectively. In particular, a morphometric analysis on the most recent data and a qualitative analysis of the differences between bottom bedform patterns, are carried out. At locations characterised by greater depths, only minor changes to the planimetric configuration of the field, i.e. crest orientation (which is seen to be orthogonal to the direction of net gross sand transport) and wave length are observed, while differences in wave length and crest direction are more evident in more shallow areas. On the other hand, wave height has significantly increased in the whole field. A possible explanation of such a change, based on the previsions of a theory which relates sand-wave growth and migration to the main components of the tidal ellipse, is provided.Responsible Editor: Jens Kappenberg     

Study of charge structure and radiation characteristic of intracloud discharge in thunderstorms of Qinghai-Tibet Plateau

The comprehensive observations on lightning discharges were conducted in Naqu area of Qinghai-Tibet Plateau in summer of 2002. The electric structures of thunderstorms and the characteristics of lightning discharges at initial stage were analyzed by using the observation data. The results show that most of intracloud (IC) lightning flashes were polarities inverted in thunderstorms with tripole electric charge structure and occurred between negative charge region located in the middle of the thunderstorm and positive charge region located at the bottom of the thunderstorm. The radiation characteristics of discharge processes in cloud with longer lasting time involved in Cloud-to-Ground (CG) lightning flashes were similar to that of IC discharges.A lot of radiation pulses were produced in these discharge processes. Because the IC discharges took place at the bottom of thundercloud and were near the ground, they may produce more serious damage to equipment on the ground therefore should not be neglected in lightning protection.     

Distribution characteristics and petroleum geological significance of the Silurian asphaltic sandstones in Tarim Basin

The Tarim Basin is a typical superimposed basin in which there have occurred multiphase adjustment and destruction of the reservoirs. The widely distributed asphaltic sandstones of the Silurian are the very product after destruction of the reservoirs. Studies show that the Silurian asphaltic sandstones distributed in both the middle and western parts on the basin are controlled chiefly by the Caledonian oil source area and by the Tazhong, Tabei and Bachu uplifts, whereas the distribution of the asphaltic sandstones on local structural belts is controlled by the reservoir's sedimentary system. Vertically, most of the asphaltic sandstones are under the regional caprock of red mudstones and the upper sandstone section of compact lithology. Due to the difference of hydrocarbon destruction in the early stage and the influence of hydrocarbon recharge in the late stage, the asphaltic sandstones and oil-bearing sandstones in the Tazhong area can be vertically divided into the upper and lower sections and they have an interactive distribution relationship as well. Asphaltic sandstones exist not only in intergranular pores but also inside the grains of sand and between the crevices, proving the destruction of early reservoirs due to uplifting. The existence of asphaltic sandstones over a large area reveals that the large-scale migration and accumulation and the subsequent destruction of hydrocarbons in the Craton area. The destruction caused a loss of the reserve resources of the Palaeozoic amounting to nearly 13.3 billion tons. Asphaltic sandstones formed after the destruction of oil and gas may serve as an effective caprock which is beneficial to accumulation of hydrocarbons and formation of the pool sealed by asphaltic sandstones in the later stage. The destruction of the early Silurian hydrocarbons depends on the stratigraphic burial depth. The deep part under the northern slope of Tazhong is an area favorable to search of undestroyed Silurian oil reservoirs.     

GOCE Gravity Field Processing Strategy

A processing strategy and the corresponding software architecture for the processing of GOCE (Gravity field and steady-state Ocean Circulation Explorer) observables is presented and described, with the major objective to compute a high-accuracy, high-resolution spherical harmonic model of the Earth's gravity field. The combination of two numerical solution strategies, i.e. the rigorous solution of the corresponding large normal equation systems applying parallel processing (on a PC cluster) as the core solver, and the fast semianalytic approach as a quick-look gravity field analysis (QL-GFA) tool, is proposed. Such a method fusion benefits from the advantages of the individual components: the rigorous inversion of the system providing also the full variance-covariance information, and the quickness enabling the consecutive production of intermediate gravity field solutions, for the purpose to analyse partial and incomplete data sets and to derive a diagnosis of the performance of the GOCE measurement system. The functionality and operability of the individual components are demonstrated in the framework of a closed loop simulation, which is based on a realistic mission scenario both in terms of the orbit configuration and the coloured measuring noise. Special concern is given to the accuracy of the recovered coefficients, the numerical behaviour, the required computing time, and the particular role of the individual modules within the processing chain. In the case of the core solver, it is demonstrated that the assembling and rigorous solution of large normal equation systems can be handled by using Beowulf clusters within a reasonable computing time. The application of the quick-look tool to partial data sets with short-term data gaps is demonstrated on the basis of several case studies. Additionally, the spectral analysis of the residuals of the adjustment is presented as a valuable tool for the verification of the noise characteristics of the GOCE gradiometer.     

The organisation of fish assemblages in the regulated Lima basin, Northern Portugal

In order to understand the structure of fish assemblages in the modified Lima basin (Northern Portugal), two distinct datasets concerning the presence and abundance of fish species were subjected to multivariate analysis. On the River Lima two types of flow modification are present within kilometres of one another: (a) a reduced and constant flow due to hypolimnetic release; and (b) an intense and irregular flow. A comparison of their influence on fish assemblages revealed a gradient of assemblage types from tributaries to main river sites. The latter were characterised by a strong dominance of cyprinids, particularly Iberian barbel (Barbus bocagei). The former harboured two kinds of fish assemblages: those closer to the river mouth were dominated by the cyprinids Iberian chub (Squalius carolitertii) and Iberian nase (Chondrostoma polylepis), which were also frequently present in the main river; while in those further upstream the predominant species was the brown trout (Salmo trutta). Although explanatory variables such as distance from source, altitude, substrate coarseness and width were the primary correlates of fish assemblage composition, dam construction and flow regulation also had a significant effect upon assemblage structure, particularly by: i) reducing the importance of migratory species; ii) constraining the presence of trout in the regulated segments; and iii) simplifying the community, especially in the case of the constant and reduced flow regime.     

Controls on modern alluvial fan processes in the central Alps,northern Italy

Alluvial fan development in Alpine areas is often affected by catastrophic sedimentary processes associated with extreme ?oods events, causing serious risks for people living on the fans. Hazard assessment in these areas depends on proper identi?cation of the dominant sedimentary processes on the fans. Data from a set of 209 alluvial fans from the central Alps of Italy are presented in this paper and analysed with the help of various statistical techniques (linear regression, principal components analysis, cluster analysis, discriminant analysis and logistic regression). First, we used modern sedimentary facies and historical records (?ood events since 15th century), to distinguish between the two dominant sedimentary processes on alluvial fans: debris ?ows and stream?ows. Then, in order to analyse the main controls on past and present fan processes, 36 morphological, geological and land‐use variables were analysed. As with observations for arid‐environment fans, catchment morphology is the most in?uential factor in the study area, whereas geology and land use are minor controls. The role of climatic change and landsliding within the catchments also seems to be very important and is discussed. Statistical techniques also help in differentiating groups of alluvial fans by sets of controlling factors, including stage and type of evolution. Finally, by using discriminant analysis and logistic regression, we classi?ed alluvial fans according to the dominant sedimentary process, with a success rate ranging between 75 and 92 per cent. Copyright © 2004 John Wiley & Sons, Ltd.     

Development characteristics of interlayer oxidation zone type of sandstone uranium deposits in the southwestern Turfan-Hami basin

The known uranium ore and anomaly occur-rences are distributed mainly in the southwestern part of the Turfan-Hami basin. The focus of current explo-ration is placed on the leachable interlayered oxidation zone type of sandstone uranium deposits. Uranium deposits in the sedimentary basin can be classified into three types in accordance with their host rock types, i.e. the sandstone-type uranium deposits, the coal rock-type uranium deposits and the mud-stone-type uranium deposits. The sandstone…     

Estimating the seismic displacement of friction pendulum isolators based on non‐linear response history analysis

A procedure for developing equations that estimate the isolator displacement due to strong ground motion is applied to buildings isolated with the friction pendulum system. The resulting design equations, based on rigorous non‐linear analysis, offer an alternative to the iterative equivalent‐linear methods used by current U.S. building codes. The governing equations of the system are reduced to a form such that the median normalized displacement of the system due to an ensemble of ground motions is found to depend on only the isolation period—a function of the curvature of the isolator—and the friction force at incipient slip normalized by peak ground velocity. The normalization is effective in minimizing the dispersion of the normalized displacement for an ensemble of ground motions, implying that the median normalized displacement is a reliable estimate of response. The design equations reflect the significant (20 to 38%) increase in displacement when the excitation includes two lateral components of ground motion instead of just one component. Equivalent‐linear methods are shown to underestimate by up to 30% the exact median displacement determined by non‐linear response history analysis for one component of ground motion, and building codes include at most a 4.4% increase for a second component. Copyright © 2003 John Wiley & Sons, Ltd.     

Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.