2-D crustal Poisson's ratio from seismic travel time inversion in Changbaishan Tianchi volcanic region

Based on the inversion method of 2D velocity structure and interface, the crustal velocity structures of P-wave and S-wave along the profile L1 are determined simultaneously with deep seismic sounding data in Changbaishan Tianchi volcanic region, and then its Poisson's ratio is obtained. Calculated results show that this technique overcomes some defects of traditional forward calculation method, and it is also very effective to determine Poisson's ratio distribution of deep seismic sounding profile, especially useful for study on volcanic magma and crustal fault zone. Study result indicates that there is an abnormally high Poisson's ratio body that is about 30 km wide and 12 km high in the low velocity region under Tianchi crater. Its value of Poisson's ratio is 8% higher than that of surrounding medium and it should be the magma chamber formed from melted rock with high temperature. There is a high Poisson's ratio zone ranging from magma chamber to the top of crust, which may be the uprise passage of hot substance. The lower part with high Poisson's ratio, which stretches downward to Moho, is possibly the extrusion way of hot substance from the uppermost mantle. The conclusions above are consistent with the study results of both tomographic determination of 3D crustal structure and magnetotelluric survey in this region.     

2-D crustal Poisson’s ratio from seismic travel time inversion in Changbaishan Tianchi volcanic region

Based on the inversion method of 2D velocity structure and interface, the crustal velocity structures of P-wave and S-wave along the profile L ₁ are determined simultaneously with deep seismic sounding data in Changbaishan Tianchi volcanic region, and then its Poisson’s ratio is obtained. Calculated results show that this technique overcomes some defects of traditional forward calculation method, and it is also very effective to determine Poisson’s ratio distribution of deep seismic sounding profile, especially useful for study on volcanic magma and crustal fault zone. Study result indicates that there is an abnormally high Poisson’s ratio body that is about 30 km wide and 12 km high in the low velocity region under Tianchi crater. Its value of Poisson’s ratio is 8% higher than that of surrounding medium and it should be the magma chamber formed from melted rock with high temperature. There is a high Poisson’s ratio zone ranging from magma chamber to the top of crust, which may be the uprise passage of hot substance. The lower part with high Poisson’s ratio, which stretches downward to Moho, is possibly the extrusion way of hot substance from the uppermost mantle. The conclusions above are consistent with the study results of both tomographic determination of 3D crustal structure and magnetotelluric survey in this region. Foundation item: Key Project from China Earthquake Administration and the Project (95-11-02-01) from Ministry of Science and Technology (2001DIA10003). Contribution No. RCEG200401, Geophysical Exploration Center, China Earthquake Administration.     

Assimilation and Fractional Crystallization Controlled by Transport Process of Crustal Melt: Implications from an Alkali Basalt-Dacite Suite from Rishiri Volcano, Japan

Mechanisms of fractional crystallization with simultaneous crustalassimilation (AFC) are examined for the Kutsugata and Tanetomilavas, an alkali basalt–dacite suite erupted sequentiallyfrom Rishiri Volcano, northern Japan. The major element variationswithin the suite can be explained by boundary layer fractionation;that is, mixing of a magma in the main part of the magma bodywith a fractionated interstitial melt transported from the mushyboundary layer at the floor. Systematic variations in SiO₂ correlatewith variations in the Pb, Sr and Nd isotopic compositions ofthe lavas. The geochemical variations of the lavas are explainedby a constant and relatively low ratio of assimilated mass tocrystallized mass (‘r value’). In the magma chamberin which the Kutsugata and Tanetomi magmas evolved, a strongthermal gradient was present and it is suggested that the marginalpart of the reservoir was completely solidified. The assimilantwas transported by crack flow from the partially fused floorcrust to the partially crystallized floor mush zone throughfractures in the solidified margin, formed mainly by thermalstresses resulting from cooling of the solidified margin andheating of the crust. The crustal melt was then mixed with thefractionated interstitial melt in the mushy zone, and the mixedmelt was further transported by compositional convection tothe main magma, causing its geochemical evolution to be characteristicof AFC. The volume flux of the assimilant from the crust tothe magma chamber is suggested to have decreased progressivelywith time (proportional to t^–1/2), and was about 3 x 10^–2m/year at t = 10 years and 1 x 10^–2 m/year at t = 100years. It has been commonly considered that the heat balancebetween magmas and the surrounding crust controls the couplingof assimilation and fractional crystallization processes (i.e.absolute value of r). However, it is inferred from this studythat the ratio of assimilated mass to crystallized mass canbe controlled by the transport process of the assimilant fromthe crust to magma chambers. KEY WORDS: assimilation and fractional crystallization; mass balance model; magma chamber; melt transport; Pb isotope     

CFD modelling of a small–scale fixed multi–chamber OWC device

Wave Energy Converters (WECs) have excellent potential as a source of renewable energy that is yet to be commercially realised. Recent attention has focused on the installation of Oscillating Water Column (OWC) devices as a part of harbor walls to provide advantages of cost–sharing structures and proximity of power generation facilities to existing infrastructure. In this paper, an incompressible three–dimensional CFD model is constructed to simulate a fixed Multi–Chamber OWC (MC–OWC) device. The CFD model is validated; the simulation results are found to be in good agreement with experimental results obtained from a scale physical model tested in a wave tank. The validated CFD model is then used for a benchmark study of 96 numerical tests. These investigate the effects of the PTO damping caused by the power take–off (PTO) system on device performance. The performance is assessed for a range of regular wave heights and periods. The results demonstrate that a PTO system with an intermediate damping can be used for all chambers in the MC–OWC device for most wave period ranges, except for the long wave periods. These require a higher PTO damping. An increased incident wave height reduces the device capture width ratio, but there is a noticeable improvement for long wave periods.     

地震测氡仪野外校准的新方法

为克服地震测氡仪野外校准氡气固体源监管严格等工作环境问题,引进东华理工大学新研制的豁免级微型氡室开展地震测氡仪野外校准实验,分析该微型氡室应用于地震测氡仪定期校准的可行性.根据《JJG 825-2013测氡仪检定规程》,分别使用微型氡室和标准氡室对2款在网观测测氡仪开展对比校准实验,分析认为采用微型氡室的校准方法基本可...     

底栖生物生产力现场测试系统(BCSPM)的建立及其初步实验结果

为对生态系统的健康评估及底栖生物资源的开发利用提供技术支撑,在胶州湾筏式养殖水域,建立了底栖生物生产力现场测试系统(BCSPM),并在光照和黑暗条件下测定了沉积物海水界面溶解氧随时间的变化、计算了氧通量、估算了底栖总初级生产力和群落呼吸。在光照较强的中午时刻测定的群落总生产力为20．76mgCm^-2h^-1;养殖水域沉积物中的群落呼吸要高于邻近水域。BCSPM整体运转良好,初步结果为系统的改进和进一步实验提供了依据。     

ATON型Hall推力器缓冲区预电离问题研究

ATON是20世纪90年代新提出的一种Hall推力器设计方案,其中的缓冲区是ATON新采用的一种结构.本文对缓冲区的作用进行分析,在此基础上提出了采用附加电源提高缓冲区预电离率的方法.并采用PIC(Particle-in-cell)粒子模拟方法对这种设计方式的等离子体分布进行数值模拟.结果表明,通过增加缓冲区内的附加电压,能够有效地提高缓冲区预电离率.     

Drained cavity expansions in soils of finite radial extent subjected to two boundary conditions

The problem of drained cavity expansion in soils of finite radial extent is investigated. Cylindrical and spherical cavities expanded from zero radius subjected to either constant stress or zero displacement at the finite boundary are considered. The generalised analytical solution procedure presented enables more advanced constitutive models to be implemented than have been possible in previous studies. Results generated for Sydney quartz sand highlight substantial differences between cavity limit pressures for the two boundary conditions and for boundaries of finite and infinite radial extent. This is of significance in accounting for boundary effects when interpreting cone penetration tests conducted in calibration chambers. Copyright © 2011 John Wiley & Sons, Ltd.     

天目山火山岩的反序现象及其成因

浙江天目山地区的中生代火山岩由流纹岩、英安岩、安山岩组成,其喷发存在反序现象。笔者用带状岩浆房的模式解释了该区火山岩的特点,应用各种物理化学方法建立了岩浆房中存在的温度、密度和粘度梯度。主要元素及微量元素的行为及其定量模拟表明,分离结晶是导致岩浆成分变化的主要机理。然而,各种矿物在岩浆房中的沉降速度计算表明,尤其是酸性岩浆中,晶体的重力沉降是不可能的。因此,岩浆房中存在的分离结晶现象主要是通过对分离作用进行的。