Chemical Composition of Ores from the Takara Volcanogenic Massive Sulfide Deposit, Central Japan

Abstract. The Takara volcanogenic massive sulfide (VMS) deposit occurs in Miocene formation of the Misaka Mountain, the South Fossa Magna region, central Japan. The tectonic setting of the Misaka Mountain is reconstructed to be a part of the paleo Izu-Ogasawara arc which collided with the Honshu arc and to form accreted body in the present position. The Takara deposit, therefore, is considered to have formed in the paleo Izu-Ogasawara arc.
The ores from the Takara deposit are classified into pyrite-type ore, chalcopyrite-type ore, and sphalerite-type ore on the basis of chemical composition and their mineral assemblages. Some pyrite-type ores are characterized by their high Au content. The Au content is hardly recognized in the chalcopyrite-type and sphalerite-type ores.
The ores from the Takara deposit have intermediate bulk chemical composition between those from the Besshi-type deposits and the Kuroko-type deposits that are two representative VMS deposits. However, the bulk chemical composition is closer to that from the Kuroko-type deposits. And moreover, chemical composition of tetrahedrite-tennantite series minerals (tetrahedrite) is similar to that from the Kuroko-type deposits. The bulk chemical composition (Cu, Zn, Co, Pb, and As contents) of ores is affected by the chemical composition of volcanic rocks associated with VMS deposits.     

Lead-arsenic soil geochemical study as an exploration guide over the Killik volcanogenic massive sulfide deposit, Northeastern Turkey

A mountainous terrain, the eastern Pontide tectonic belt, located in northeastern Turkey, contains more than 60 known volcanogenic massive sulfide (VMS) deposits that differ in reserves (0.1–30 million tonnes) and grades. Soil geochemistry is conventionally used in exploration programs to discover concealed VMS deposits in the region. In the present study, Pb and As element pair were used as pathfinder elements to investigate the relationship of their anomalies to a completely delineated ore deposit (Killik VMS deposit) in an orientation survey that served as a natural physical model. Two hundred forty soil samples were analyzed in the present study. The two elements, which represent the opposite ends of the mobility range, revealed high contrast and overlapped each other at the location of the ore deposit due to enhancement of the anomalies by hydromorphic dispersion, which is an indication that soil samples would produce reliable results. The successful delineation of the deposit is remarkable considering the rough topography and the climatic limitations. Previously the extremely moist and temperate climate was thought to cause excessive leaching of the trace element pathfinders from the ore deposits to produce extensive anomalies usually extending away from the mineralization thus, leading to erroneous results and/or extensive anomalous areas. But the present research has shown that the method can be used effectively if the sampling and data evaluation is carefully conducted.     

Characterisation of carbonate minerals from hyperspectral TIR scanning using features at 14 000 and 11 300 nm

Rapid characterisation of carbonate phases in hyperspectral reflectance spectra acquired from drill core material has important implications for mineral exploration and resource modelling. Major infrared active features of carbonates lie in the thermal region around 6500 nm, 11 300 nm and 14 000 nm, with the latter two features being most useful for differentiating mineral species. A scatter diagram of the wavelength of the 14 000 nm feature vs that of the 11 300 nm feature, powerfully differentiates carbonates. Although the wavelength of the 11 300 nm peak is easily measured, the 14 000 nm trough and peak are commonly weak and their wavelengths can confidently be used only after filtering the spectra, e.g. selecting only those with the trough and peak separated by 175–230 nm, typical of common carbonates. The method is demonstrated with drillhole 120R from the Rosebery polymetallic VHMS deposit in western Tasmania, which has been scanned with the HyLogger-3 system. A 14 000–11 300 plot shows a high degree of clustering of the drillhole 120R data close to the library spectra of calcite, dolomite, Fe-dolomite, ankerite, kutnohorite, rhodochrosite, Fe-rhodochrosite and siderite. The interpreted compositions of the carbonate spectral populations strongly correlate with the chemical populations of 144 analysed carbonates and provide a highly resolved spatial framework for interpreting carbonate alteration.     

Hydrogen sulfide measurements in air by passive/diffusive samplers and high-frequency analyzer: A critical comparison

In this study, hydrogen sulfide (H₂S) measurements in air carried out using (a) passive/diffusive samplers (Radiello^® traps) and (b) a high-frequency (60 s) real-time analyzer (Thermo^® 450i) were compared in order to evaluate advantages and limitations of the two techniques. Four different sites in urban environments (Florence, Italy) and two volcanic areas characterized by intense degassing of H₂S-rich fluids (Campi Flegrei and Vulcano Island, Italy) were selected for such measurements. The concentrations of H₂S generally varied over 5 orders of magnitude (from 10⁻¹–10³ μg/m³), the H₂S values measured with the Radiello^® traps (H₂S_R) being significantly higher than the average values measured by the Thermo^® 450i during the trap exposure (H₂S_Ta), especially when H₂S was <30 μg/m³. To test the reproducibility of the Radiello^® traps, 8 passive/diffusive samplers were contemporaneously deployed within an 0.2 m² area in an H₂S-contaminated site at Mt. Amiata (Tuscany, Italy), revealing that the precision of the H₂S_R values was ±49%. This large uncertainty, whose cause was not recognizable, is to be added to that related to the environmental conditions (wind speed and direction, humidity, temperature), which are known to strongly affect passive measurements. The Thermo^® 450i analyzer measurements highlighted the occurrence of short-term temporal variations of the H₂S concentrations, with peak values (up to 5732 μg/m³) potentially harmful to the human health. The Radiello^® traps were not able to detect such temporal variability due to their large exposure time. The disagreement between the H₂S_R and H₂S_Ta values poses severe concerns for the selection of an appropriate methodological approach aimed to provide an accurate measurement of this highly toxic air pollutant in compliance with the WHO air quality guidelines. Although passive samplers may offer the opportunity to carry out low-cost preliminary surveys, the use of the high-frequency H₂S analyzer is preferred when an accurate assessment of air quality is required. In fact, the latter provides precise real-time measurements for a reliable estimation of the effective exposure to hazardous H₂S concentrations, giving insights into the mechanisms regulating the dispersion of this air pollutant in relation to the meteorological parameters.     

云南会泽铅锌矿床分散元素的富集机制——兼论浅色闪锌矿富集Cd的原因

文章对云南会泽铅锌矿床的黄铁矿、方铅矿和闪锌矿中的分散元素进行了电子探针分析(EMPA),探讨了分散元素的富集机制.结果表明,分散元素含量已达到综合利用指标,且富集规律为:分散元素以类质同象的形式赋存,黄铁矿中分散元素含量较低,而方铅矿中分散元素的含量稍高于闪锌矿.闪锌矿中:Cd富集顺序为红色＞杂色＞黑色,在高温阶段Cd置换Fe,低温阶段Cd置换Zn;Ga通过置换Zn进入闪锌矿,Ge可能主要替代Fe而进入闪锌矿晶格.方铅矿中:Cd和Ga元素置换Fe或Pb先进入方铅矿晶格内,Ge则富集较晚,具体表现为:当Ga含量较低时,元素进入方铅矿品格顺序为Fe,Zn→Cd→Ga,Ge,当Ga含量较高时,元素进入方铅矿品格的顺序依次为Cd,Ga→Ge.     

金川铜镍矿床中新生代抬升冷却过程：来自裂变径迹的证据

本文基于热年代学理论,利用锆石和磷灰石裂变径迹测年数据及对磷灰石热史的模拟,分析探讨金川铜镍矿床在中新生代的抬升冷却过程,认为金川超基性岩体自中生代以来一直处于持续的冷却抬升阶段,且在中侏罗世和晚白垩世早期经历了两期快速的抬升冷却事件,推断此事件与青藏高原后期活动时间相对应,证明金川岩体受到该事件的远程效应波及,致使该矿床遭受了一定的改造。     

吉林白山刘家堡子狼洞沟金银矿床地球化学特征及成因探讨

通过对刘家堡子-狼洞沟金银矿床地质、成矿元素和同位素地球化学特征的分析和研究,发现矿区内近EW向和NE向断裂构造是主要容矿构造;最佳找矿元素前缘晕组合为As-Sb-Zn,矿上晕元素组合为Au-Ag-Pb-Hg,尾晕元素组合为Ni-Cu-Co;成矿作用中,古老基底中元古宙老岭群变质岩系为成矿提供了丰富的物质来源,而燕山期构造岩浆活动在提供成矿物质的同时还提供了热动力。刘家堡子-狼洞沟金银矿床应划属为与燕山晚期超浅成中酸性岩浆岩有关的中低温热液构造裂隙充填型金银矿床。     

The source of sulfur in sulfide deposits in the Siberian Platform traps (from isotope data)

The source of sulfur in giant Norilsk-type sulfide deposits is discussed. A review of the state of the problem and a critical analysis of existing hypotheses are made. The distribution of δ³⁴S in sulfides of ore occurrences and small and large deposits and in normal sedimentary, metamorphogenic, and hypogene sulfates is considered. A large number of new δ³⁴S data for sulfides and sulfates in various deposits, volcanic and terrigenous rocks, coals, graphites, and metasomatites are presented. The main attention is focused on the objects of the Norilsk and Kureika ore districts. The δ³⁴S value varies from -14 to + 22.5‰ in sulfides of rocks and ores and from 15.3 to 33‰ in anhydrites. In sulfide-sulfate intergrowths and assemblages, δ³⁴S is within 4.2-14.6‰ in sulfides and within 15.3-21.3‰ in anhydrites. The most isotopically heavy sulfur was found in pyrrhotite veins in basalts (δ³⁴S = 21.6‰), in sulfate veins cutting dolomites (δ³⁴S = 33‰), and in subsidence caldera sulfates in basalts (δ³⁴S = 23.2-25.2‰). Sulfide ores of the Tsentral’naya Shilki intrusion have a heavy sulfur isotope composition (δ³⁴S = + 17.7‰ (n = 15)). Thermobarogeochemical studies of anhydrites have revealed inclusions of different types with homogenization temperatures ranging from 685 °C to 80 °C. Metamorphogenic and hypogene anhydrites are associated with a carbonaceous substance, and hypogene anhydrites have inclusions of chloride-containing salt melts. We assume that sulfur in the trap sulfide deposits was introduced with sulfates of sedimentary rocks (δ³⁴S = 22-24‰). No assimilation of sulfates by basaltic melt took place. The sedimentary anhydrites were “steamed” by hydrocarbons, which led to sulfate reduction and δ³⁴S fractionation. As a result, isotopically light sulfur accumulated in sulfides and hydrogen sulfide, isotopically heavy sulfur was removed by aqueous calcium sulfate solution, and “residual” metamorphogenic anhydrite acquired a lighter sulfur isotope composition as compared with the sedimentary one. The wide variations in δ³⁴S in sulfides and sulfates are due to changes in the physicochemical parameters of the ore-forming system (first of all, temperature and P_ch4) during the sulfate reduction. The regional hydrocarbon resources were sufficient for large-scale ore formation.     

内蒙古兴和县曹四夭超大型斑岩钼铅锌金成矿系统年代学及其地质意义

曹四夭斑岩钼矿床位于内蒙古兴和县,是华北克拉通北缘最大的钼矿床。该矿床中部发育斑岩型钼矿体,外围和上部产出热液脉型铅锌金矿体。文章选取1件与斑岩钼矿化共生的绢云母样品进行了40Ar-39Ar定年,获得40Ar-39Ar坪年龄为(144.4±1.2)Ma,相应的39Ar/36Ar-40Ar/39Ar等时线年龄为(146.4±2.2)Ma(MSWD=0.31),将等时线年龄认作绢云母的Ar封闭年龄,表明曹四夭斑岩钼矿化发生在约146 Ma前。选取14件脉型铅锌矿石中的闪锌矿、黄铁矿和磁黄铁矿样品开展了Rb-Sr定年,获得4件闪锌矿的Rb-Sr等时线年龄为(145.1±3.0)Ma(MSWD=0.63);5件黄铁矿的Rb-Sr等时线年龄为(145.2±1.3)Ma(MSWD=0.53);4件闪锌矿、5件黄铁矿和1件磁黄铁矿的Rb-Sr等时线年龄为(145.3±1.0)Ma(MSWD=0.43)。硫化物Rb-Sr定年结果表明曹四夭矿床脉型铅锌矿化形成于约145 Ma前。本次绢云母40Ar-39Ar和硫化物Rb-Sr定年结果表明,曹四夭矿床斑岩型钼矿化和脉型铅锌金矿化为同期产物,两者均形成于晚侏罗世末期,属于同一个斑岩成矿系统。曹四夭矿床硫化物的w(Rb)和w(Sr)分别为0.1867×10~(-6)~1.305×10~(-6)和0.3175×10~(-6)~6.935×10~(-6),Sr同位素初始比值(87Sr/86Sr)i介于0.709 919~0.711 951之间,平均值0.710 952,结合前人获得的辉钼矿Re含量,认为曹四夭矿床的成矿物质主要来源于地壳。     

金川铜镍硫化物矿床中铂族矿物的主要类型和产出特征:热液蚀变过程中铂族元素的富集机理

金川铜镍硫化物矿床是我国最主要的铂族元素(PGE)资源产地,其矿石受热液蚀变作用影响明显,并产出多种铂族矿物(PGM)。岩浆演化和热液蚀变过程中PGE的迁移富集机制和PGM的成因,一直是研究PGE地球化学行为非常关注的问题。本文对金川铜镍硫化物矿床中PGM的研究发现,其主要类型包括含PGE的硫砷化物(硫砷铱矿)和砷化物(砷铂矿),Pd的铋化物、碲化物和硒化物,以及少量其他铂族矿物。其中,硫砷铱矿可包裹于各种贱金属硫化物(镍黄铁矿、磁黄铁矿和黄铜矿)中,表明硫砷铱矿可能结晶于早期的含As硫化物熔体,随后被包裹于硫化物熔体冷凝分异产生的单硫化物固溶体(MSS)和中间硫化物固溶体(ISS)中。硫化物熔体中的As可能主要通过地壳混染作用加入幔源岩浆。大量铋钯矿(PdBi)呈微细乳滴状包裹于黄铜矿中,为晚期ISS冷凝形成黄铜矿过程中出溶的产物。少量铋钯矿(PdBi_2)呈不规则状充填于矿物裂隙,与次生磁铁矿脉紧密共生,并随矿石的蚀变程度增加,铋钯矿的化学成分由PdBi逐渐向PdBi_2转变,表明这部分铋钯矿为后期热液蚀变产物。铋碲钯矿和钯的硒化物则主要产出于镍黄铁矿裂隙且与次生磁铁矿紧密共生,指示明显的热液成因。钯的硒化物的出现表明,岩浆期后酸性、高盐度、高氧逸度的富Cl~-流体对金川铜镍硫化物矿床中Pd的迁移和富集起到了关键控制作用。