Vertical dynamic and thermodynamic characteristics of urban lower boundary layer and its relationship with aerosol concentration over Beijing

By utilizing observational data from a 325 m tower of the Institute of Atmospheric Physics (IAP), Chinese Academy of Sciences (CAS) on March 19-29, 2001 and August 11-25, 2003, a comprehensive study was conducted on the vertical dynamical and thermodynamic characteristics of the urban lower boundary layer (ULBL) and its relationship with aerosol concentration over Beijing. Firstly, a comparative analysis was made on the gradient data (wind, temperature and humidity), ultrasonic data (atmospheric turbulences) and air-quality observations at different tower heights (47, 120 and 280 m). Secondly, a diagnosis was made to reveal the major features of normalized variances of velocity and temperature, turbulence kinetic energy as well as their relationship with aerosol concentrations. Furthermore, the characteristics of the ULBL vertical structure and the TSP concentration/distribution variations during a sand/dust weather process were also analyzed. The outcome of the study showed that under unstable stratification, the normalized variances of velocity (σu/u*, σv/u*, σw/u*) and temperature (σT/T*) at 47 and 120 m heights fit the Monin-Obukhov similarity (MOS) framework and the fitting formulas were given out accordingly. According to the stratification parameter (z′/L), the stable ULBL could be divided into 2 zones. With z′/L<0.1, it was a weakly stable zone and MOS framework was applicable. The other was a highly stable zone with z′/L>0.1 and the normalized velocity variances tended to increase along with higher stability, but it remained constant for normalized temperature variances. At daytime, the near-surface layer includes two heights of 47 and 120 m, while 280 m has been above it. The ULBL analysis in conjunction with a sand/dust weather process in Beijing in March 2001 indicated that the maximum concentration of Total Suspended Particulates (TSP) at 320 m reached 913.3 μg/m3 and the particles were transported from the upper to lower ULBL, which was apparently related to the development process of a low-level jet and its concomitant strong sinking motion.     

Long‐term monitoring of a mercury contaminated estuary (Ria de Aveiro,Portugal): the effect of weather events and management in mercury transport

The main aim of this research was to assess the mercury transport from an estuarine basin with a background of anthropogenic contamination during a spring tidal cycle (year 2009) and compare it with two previous tidal cycles (years 1994 and 1999), as part of a long‐term monitoring program. Results showed that effective mercury transport occurs both in the dissolved and particulate fractions (0.18 and 0.20 kg per tidal cycle, respectively), and despite an overall decrease in environmental contamination, results more than double previous findings on particulate transport in the system. These findings result essentially from changes in the tidal prism (net export of 2 million m³ of water), given that both dissolved and particulate concentrations did not increase over time. Hydrodynamic simulations were performed to evaluate the effect of physical disturbance (dredging) and weather events (increased freshwater flow) in these processes, and results suggest the increased freshwater flow into the system as the main forcing function for the mercury transport increment. These results highlight the importance of long‐term monitoring programs, since despite an overall improvement in local contamination levels, the enhancement of transport processes through hydrological changes increases environmental pressure away from the contamination source. Copyright © 2012 John Wiley & Sons, Ltd.     

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.     

FBX三维模型自动转换为OBJ三维模型方法研究

本文研究实现了一种FBX三维模型自动转换为OBJ三维模型的方法,包括几何信息和材质信息的自动转换,所述方法包括获取数据、几何信息处理、材质信息处理、OBJ格式输出和材质库文件输出等步骤。     

关于制作像控电子点之记方法与流程的探讨

主要介绍电子点之记的制作流程及方法,以及所涉及的一些计算机软件和工序中可以自动化处理的程序,对于实现难点也进行了分析及说明,使像片控制测量点之记制作的流程更为简便,成果更为可靠。     

迁移学习支持下的高分影像山地滑坡灾害解译模型

无人机低空遥感是近年来新兴的一种快速获取灾情信息的手段,如何利用无人机高分影像构建滑坡灾害解译模型是实现快速自动解译滑坡的关键。针对该问题,对比了多种影像特征提取方法,将迁移学习(TL)特征和支持向量机(SVM)引入到构建滑坡灾害自动解译模型中,提出了一种TL支持下的高分影像滑坡灾害解译模型。选取5·12汶川地震及4·20芦山地震系列无人机影像构建了滑坡灾害样本库并进行了实验,TL特征方法整体分类准确度ACC为95%,ROC达到0.98,识别准确率达到97%。结果表明,所提方法可用于高分影像滑坡自动解译,同时可用于大面积高分影像中快速山地滑坡灾害定位及检测。     

变分同化框架通过背景误差协方差构建动力平衡约束的研究进展

通过背景误差协方差构建动力平衡约束是变分同化框架设计的重要环节。它不仅帮助实现变量间的协同分析,提高观测使用效率,还能改善变分极小化问题的性状。本文在系统梳理通过背景误差协方差引入动力平衡约束的方式、流程的基础上,对求解目前全球和有限区域变分同化系统普遍采用的准地转平衡和静力平衡约束的共性问题和存在的不足作了归纳总结。分析了求解准地转平衡约束的三类方案:动力平衡方程方案、统计方案和动力-统计相结合方案的优缺点。对照比较了不同垂直离散方案下求解静力平衡约束时遇到的欠定问题的表现以及解决途径。最后,展望了基于背景误差协方差构建动力平衡约束在赤道等特殊地区、高分辨率同化系统、以及集合-变分混合同化系统发展中面临的挑战和机遇。     

自动气象观测数据的质量控制

精细化气候变化分析及气候预测服务亟待发展,对高分辨率优质量的气候资料需求不断增长。本文利用缺测率、对比差值、空间一致性、粗差率、一致率5个指标对2009—2014年浙江省2 209个自动站温度数据进行评估分析,运用开放式可调整的评分标准,选取数据质量稳定可靠的站点,满足气候研究与业务的发展需求。共取得91个一级可用站,499个二级可用站,363个三级可用站,一级站主要分布于宁波和嘉兴地区,二级和三级站在各地都有较均匀的分布。在全省气候统计分析中,可以根据需求利用可用站。此外,有可用自动站参与的温度分布图完美呈现了地形对温度的影响,也使城市化发展突显出来,精细化的气候分析能更有效的为高山地区耕种制度及城市建设与规划提供科学依据。     

FDR土壤水分传感器原状土壤标定方法研究

为获得测站准确的土壤水分传感器标定参数,利用自动土壤水分站点的大型原状土壤为样本,在实验室同时进行人工称重观测和仪器自动对比观测,得到一系列的人工自动测量数据,以人工称重数据为准对自动土壤水分传感器进行订正。由于采用原状土壤,样本土壤的质地、密度、土壤颗粒和结合紧密度基本没有受到破坏,订正后的自动土壤体积含水量值能更加真实反映台站实际土壤墒情,能够修订人工对比观测期间由于样本空间不足导致的不合理的田间标定方程。     

ZQZ TF型风传感器冻结故障自动检测装置设计

近年来我国大部分地区在冬、春两季多遭受冻雨灾害,自动气象站的风向风速传感器容易因冻结而无法正常工作。针对冻结故障的实时检测问题,本文设计了一种基于ZQZ-TF型风传感器的故障自动检测装置。该装置通过检测风传感器的工作电压和工作电流,实现对传感器实时状态的监控。同时,结合具体的故障诊断算法,能够快速判断风传感器是否被冻结。系统的核心硬件电路、软件算法可分别集成在自动气象站风向风速数据采集电路和嵌入式软件中,具有结构紧凑、操作简单的特点。经验证,该装置能够实时检测风传感器冻结故障,且工作稳定,检测精度高。