亚洲中东部岩石圈塑性流动网络与构造应力场

:板块边缘驱动作用主要通过岩石圈下层的网络状塑性流动实现其向板内的远程传递 ,并控制上层的构造变形。相应地造成构造应力场的的多层分布格局 ,主要包括下层 (含下地壳和岩石圈地幔 )、多震层 (属于上部地壳 )和浅层 (浅表地壳 )应力场。这些层中最大压应力方向可分别采用塑性流动网络共轭角平分线、震源机制解和井孔应力测量等方法加以确定。根据对亚洲中—东部下层与多震层应力场的对比表明 ,大部分地区二者的应力方向基本一致 ,表明了下层对上层的控制 ,这对了解板内应力场的一般趋势与格架提供了基础。靠近驱动边界的局部地段 ,由于上部地壳直接的传递作用 ,往往导致上、下层应力方向的显著偏差 ,有可能成为进一步了解深浅层联系和差异的一种方法     

隧道单层衬砌设计方法研究及应用

目前,在单层衬砌设计中应用较为广泛的是基于挪威法的Q系统支护设计法,但该方法涉及的参数有6个,在施工前及施工过程中测试这些参数经验性较强,准确性不高,而且费用较高;将Q法直接移植到中国的单层衬砌设计困难较大,不适合中国国情。在此背景下,提出以屈服接近度和围岩松动圈支护理论为基础的单层衬砌设计原则和方法,并结合合武铁路大别山隧道2号斜井进行了工程实践。首先通过地质勘查得到隧道所在地区的工程地质、水文地质特征以及围岩的物理力学指标,确定隧道围岩的屈服接近度,进而提出单层衬砌支护参数及喷射混凝土的力学控制指标,完成结构的预设计;根据隧道施工过程中实测的围岩松动圈范围,运用松动圈支护理论修正设计,从而形成一套完整的单层衬砌设计方法体系。实践表明,提出的单层衬砌设计方法经济适用、对施工干扰小,适合信息化施工,且施作完成的单层衬砌结构安全可靠,具有显著的经济效益和社会效益,有较大的推广前景。     

The introduction of neural network system and its applications in rock engineering

The neural network system has been developing very fast recently. It has been widely used in many industries such as automation, nuclear power plant, chemical industry, etc. Neural network systems have a great advantage in dealing with problems in which many factors influence the process and result, and the understanding of this process is poor, and there are experimental data or field data. In rock engineering, many problems are of this nature. In this paper, a brief introduction to neural network systems is given. Problems such as what is a neural network, how it works and what kind of advantages it has are discussed. After this, several applications in rock engineering, made by us, are presented. Case 1 is ore boundary delineation. In this case, the rock are divided into three classes, i.e.: (1) waste rock; (2) semi-ore; and (3) ore for mining purposes. The neural network system built can judge whether it is ore, semi-ore or waste rock along the borehole according its corresponding geophysical logging data, such as gamma-ray, gamma-gamma, neutron and resistivity. Case 2 is aggregate quality prediction. In this case, the quality parameters: (1) impact value; (2) abrasion value I; and (3) abrasion value II are predicted by using a neural network system based on density, point load, content of quarts and content of brittle minerals. Case 3 is rock indentation depth prediction. In this case, the rock indentation depth under indentation load is predicted by the established neural network system based on the indentation load on rock, indenter type and rock mechanical properties, such as uniaxial compressive strength, Young's modulus. Poisson's ratio, critical energy release rate and density. In all these cases, the neural network systems have been applied successfully. The testing results are satisfactory and better than the existing techniques.     

江西修水,乐平地区与浙江长兴地区二叠系—三叠系界线剖面对比

通过对江西修水、乐平二叠系—三叠系（以下简称Ｐ＼Ｔ）界线剖面与浙江长兴的Ｐ＼Ｔ界线剖面对比,表明浙江长兴Ｐ＼Ｔ界线剖面存在３点缺陷。按照《国际地层指南》的要求,修水、乐平Ｐ＼Ｔ界线剖面之长处有可能弥补长兴Ｐ＼Ｔ界线剖面之不足。     

The complex one-sided integrals of Cauchy and Hadamard and application to boundary element method

The definitions of complex integrals of Cauchy and Hadamard with the singular point coinciding with the end point of the integration curve are proposed. It is shown that the new integrals satisfy most of the properties of the regular ones, including the change of variables. It is also shown that the Cauchy principal value (CPV) and Hadamard finite-part (HFP) integrals can be considered as a sum of the new type integrals. The application to numerical solution by the boundary element method (BEM) and the complex hypersingular integral equation (CHSIE) for the multiregions of interacting elastic bodies and bodies with cracks and holes is discussed. The different ways to place the collocation points are considered. The numerical results for the problems of circular hole and circular elastic inclusion in infinite plate indicated that the appropriate choice of the approximating functions leads to a high accuracy of the calculation. Applications of the new technique to geomechanics problems are discussed. © 1998 John Wiley & Sons, Ltd.     

Contrasting morphodynamics in alluvial fans and fan deltas: effect of the downstream boundary

Alluvial fans and fan deltas can, in principle, have exactly the same upstream conditions, but fan deltas by definition have ponding water at their downstream boundary. This ponding creates effects on the autogenic behaviour of fan deltas, such as backwater adaptation, mouth bars and backward sedimentation, whereas alluvial fans may lack these effects. Hence the present authors hypothesize that morphodynamics on alluvial fans are determined primarily by upstream boundary conditions, whereas morphodynamics on fan deltas are determined by both the upstream and the downstream boundary condition and changes therein. To isolate the effects of the upstream and downstream boundaries, five new alluvial fan experiments are compared with the details of three fan deltas published earlier that were formed under very similar and simple conditions. Similar to the fan deltas, the alluvial fans build up by sheet flow, whilst quasi‐regular periods of incision cause temporary channelized flow. Incision is followed by channel backfilling, after which the fan returns to sheet flow. The channelization and backfilling in alluvial fans is markedly less pronounced and more prone to autogenic disturbance than in fan deltas. The difference is caused by morphodynamics at the downstream boundary. In a fan delta, the flow expansion of the channel causes deposition of all the sediment, which forms a mouth bar and causes strong backfilling. In an alluvial fan, on the other hand, the slope break at the fan perimeter causes some deposition, but transport is not reduced to zero. Consequently, the backfilling in alluvial fans is less pronounced than in fan deltas. Other published experiments support this trend: removal of the mouth bar by a river leads to permanent channelization, whilst pronounced mouth‐bar formation in highly channelized deltas promotes backward sedimentation. The experimental results for this study predict that, when alluvial fans prograde into lakes or deep rivers, they transition to fan deltas with increasingly deeper channels and thicker backfill deposits.     

典型隔水边界非稳定流承压含水层抽水试验研究

隔水边界附近的承压含水层,即半无限区域的承压含水层参数的准确求取对于特定地段的地下水资源量计算具有重要意义。以高密市柴沟镇小于家庄抽水试验为例,详细阐述了隔水边界附近的承压含水层参数求取过程,并对结果进行较为详尽的讨论。     

Palaeoenvironmental significance of Late Permian palaeosols in the South‐Eastern Iberian Ranges,Spain

The Late Permian (Wuchiapingian) Alcotas Formation in the SE Iberian Ranges consists of one red alluvial succession where abundant soil profiles developed. Detailed petrographical and sedimentological studies in seven sections of the Alcotas Formation allow six different types of palaeosols, with distinctive characteristics and different palaeogeographical distribution, to be distinguished throughout the South‐eastern Iberian Basin. These characteristics are, in turn, related to topographic, climatic and tectonic controls. The vertical distribution of the palaeosols is used to differentiate the formation in three parts from bottom to top showing both drastic and gradual vertical upwards palaeoenvironmental changes in the sections. Reconstruction of palaeoenvironmental conditions based on palaeosols provides evidence for understanding the events that occurred during the Late Permian, some few millions of years before the well‐known Permian‐Triassic global crisis.