黄海夏季典型站位的底边界层动物

2002年8月25~26日,在黄海夏季冷水团区域内的抛锚站位(35°22′N,121°59′E),使用柱状界面采样器进行了昼夜连续取样,对底边界层动物的种类组成与昼夜丰度变化进行了研究,以获得对黄海底边界层动物的初步认识。共记录底边界层动物21种,隶属18科、19属。超底栖动物和中型浮游动物是黄海夏季底边界层动物的2个重要类群,主要种类有尖额真猛水蚤(Euterpina acutifrons)、挪威小毛猛水蚤(Microsetella norvegica)、异厚盖钩虾(Synchelidium miraculum)、双刺纺缍水蚤(Acartia bifilosa)和小拟哲水蚤(Paracalanus parvus),其丰度皆有明显的昼夜波动现象。以桡足类无节幼体为代表的小型浮游动物也是底边界层动物中不容忽视的类群之一。采集到5个黄海区的新记录物种:美丽猛水蚤(Nitocrasp.)、跛足猛水蚤(Mesochrasp.)、咸水剑水蚤(Halicyclopssp.)、掌刺梭剑水蚤(Lubbockia squillimana)和异厚盖钩虾(Synchelidi-um miraculum),显示出底边界层动物种类组成的特殊性。     

2004年9月南海北部移动船载温盐剖面仪观测结果初步分析

在2004年9月南海北部开放航次中,中国科学院南海海洋研究所首次引进使用了民用移动船载温盐剖面仪（Moving Vessel Profiler,MVP）,并在珠江口外海和越南东岸外海2个断面进行了拖曳测量。通过对MVP和定点温盐深仪所测数据的比较分析,发现MVP下降阶段数据较为可信。对所获温、盐、深数据进行处理分析,发现2个断面的水团性质存在明显差异。越南东岸外海断面的混合层平均深度（27m左右）深于珠江口外海断面（17．5m左右）;在表层和近40m深度处,珠江口外海的盐度值都高于越南东岸外海,呈现高盐的特性。     

1998年季风爆发期南海大气边界层的日变化

在南海尚未有关于海洋大气边界层结构日变化方面的研究.研究海洋大气边界层,有利于我们更好地研究海洋表层结构变化影响机制,对发生在海洋大气边界层上的过程进行预测预报.因此了解南海海洋大气边界层的结构特征,对于我们进一步了解南海天气尺度海气相互作用有非常重要的意义.通过对1998年在南海南部(6°15′N,110°E)和南海北部(20°29′39″N,116°57′48″E)的南海季风试验中定点科考船释放一天四次的探空观测资料分析得出,季风爆发前海洋大气边界层存在规则的日变化,在中午达到深厚.季风爆发后南海北部大气边界层日变化消失,南海南部依然明显.分析表明对其日变化起重要影响的是短波辐射;潜热输送对大气边界层高度日变化影响不大.与大气边界层厚度日变化相对应,南海南部边界层内水汽日变化明显,而南海北部较不明显.     

Coupling winds to ocean surface currents over the global ocean

A Wind stress–Current Coupled System (WCCS) consisting of the HYbrid Coordinate Ocean Model (HYCOM) and an improved wind stress algorithm based on Donelan et al. [Donelan, W.M., Drennan, Katsaros, K.B., 1997. The air–sea momentum flux in mixed wind sea and swell conditions. J. Phys. Oceanogr. 27, 2087–2099] is developed by using the Earth System Modeling Framework (ESMF). The WCCS is applied to the global ocean to study the interactions between the wind stress and the ocean surface currents. In this study, the ocean surface current velocity is taken into consideration in the wind stress calculation and air–sea heat flux calculation. The wind stress that contains the effect of ocean surface current velocity will be used to force the HYCOM. The results indicate that the ocean surface velocity exerts an important influence on the wind stress, which, in turn, significantly affects the global ocean surface currents, air–sea heat fluxes, and the thickness of ocean surface boundary layer. Comparison with the TOGA TAO buoy data, the sea surface temperature from the wind–current coupled simulation showed noticeable improvement over the stand-alone HYCOM simulation.     

海域勘界技术的应用

制订划界方案是海域勘界工作的核心工作,包括资料分析、初拟划界草案、草案协调和协商等阶段．大多数海域界线需要分段划分．勘界实践表明,不同界线及其不同区段的界线必须运用不同的划界技术,如垂直岸线法、水道（航道）中心线法、协议线法、习惯线法、中点连线法、用海界线法及岛礁中间线法等．草案协调是勘界工作的难点,必须采取背靠背协调、面对面协商及反复沟通等方法,促成双方达成共识．     

Simulation of nonlinear wave run-up with a high-order Boussinesq model

This paper considers the numerical simulation of nonlinear wave run-up within a highly accurate Boussinesq-type model. Moving wet–dry boundary algorithms based on so-called extrapolating boundary techniques are utilized, and a new variant of this approach is proposed in two horizontal dimensions. As validation, computed results involving the nonlinear run-up of periodic as well as transient waves on a sloping beach are considered in a single horizontal dimension, demonstrating excellent agreement with analytical solutions for both the free surface and horizontal velocity. In two horizontal dimensions cases involving long wave resonance in a parabolic basin, solitary wave evolution in a triangular channel, and solitary wave run-up on a circular conical island are considered. In each case the computed results compare well against available analytical solutions or experimental measurements. The ability to accurately simulate a moving wet–dry boundary is of considerable practical importance within coastal engineering, and the extension described in this work significantly improves the nearshore versatility of the present high-order Boussinesq approach.     

高压气藏不动管柱分层压裂工艺研究与应用

川西低渗高压气藏具有多层系的特点,层间距离一般在十至百米左右。为了提高气井产量与开采经济效益,鉴于气井加砂压裂后压井会严重伤害储层,影响压裂效果,采用压裂管柱直接作为生产管柱,研究形成了以FCY211及Y241封隔器不同组合的两层不动管柱分层压裂工艺。同时,在成熟的两层分压工艺基础上,结合投球选压工艺,研究形成了以“工具分层＋投球选压”不动管柱三层分层的压裂工艺。现场应用实践表明,分层压裂极大地增加了单井的产能,取得了明显经济效益,对类似气藏的多层压裂与开采提供了有益参考。     

Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.     

Application of Line Boundary Technique to 2D Tidal Current Simulation

To deal with the problems concerning the shore boundary,moving boundary and engineeringboundary which are encountered frequently in 2D tidal current simulation by the finite difference method,theconcept of line boundary is introduced and studied here,and then the line boundary technique in common useis proposed in this paper.Analysis of some calculation cases shows that this technique is practical,effective,and simple in 2D tidal current simulation involving different boundaries.     

利用伴随法优化非线性潮汐模型的开边界条件Ⅰ．伴随方程的建立及“孪生"数值试验

本研究采用基于最优控制理论的伴随法,把观测资料同化到陆架海域潮汐数值模型中去,优化开边界条件,提高数值预报的精度．潮汐模型的控制方程为考虑平流项、非线性底摩擦和侧向涡动粘性项的非线性浅水方程组;采用Lagrange乘子法建立了伴随模型．研究分两部分：第一部分即本文,建立非线性浅水方程模型的伴随方程、给出目标函数的梯度,并实现“孪生”数值试验;第二部分另文给出．