工程场地的特征与工程地质分区

工程场地与城市在空间尺度上相去甚远 ,但工程场地所具备的与环境行为相近的共性 ,使其属性分析可以推广应用到城市建设所面对的整个工程地质环境。从这一意义上说 ,工程场地是整个城市宏观工程地质环境的微观单元 ,众多微观单元的组合构成了环境的宏观总体。为此 ,工程场地的三大属性特性、适宜性、稳定性 ,可以作为城市工程地质环境分析中分析方法的基础。从工程场地分析推广到城市工程地质环境分析 ,还将有助于保证城市工程地质环境分析的定量化水平。     

西安市黑河水库左坝肩渗漏三维数值模拟及坝肩坡体稳定性分析

直接针对西安市黑河水库左坝肩渗漏这一重大工程实际问题展开研究与计算。应用三维有限差分方法对左坝肩单薄山梁的初始渗流场、蓄水后的渗流场进行了数值模拟 ,分析渗漏方式、计算相应的渗漏量 ,并通过计算说明了断层是集中渗漏通道。而后利用三维数值计算提供的水位值 ,应用极限平衡分析法 ,对左坝肩岩质斜坡稳定性进行计算与分析 ,计算结果对实际工程的决策与治理提供重要的依据。     

论滑坡分类

在广泛查阅和总结国内外滑坡分类基础上 ,以滑坡监测预报与防治为目的 ,遵从滑坡活动各要素的地位与作用 ,根据分类体系的完备性需要 ,理清了已有各种滑坡分类的性质及其彼此间的关系 ,并对之进行了科学归纳、取舍和补充 ,建立了具有层次系统性的综合性滑坡分类体系。为建立滑坡监测预报地质模型体系奠定了基础 ,并有助于对滑坡活动的全面研究。     

南水北调中线工程上第三系膨胀性硬粘土的工程地质特性研究

上第三系硬粘土在中国东部新生代沉积盆地具有广泛的分布 ,因其性质复杂而成为中国区域性特殊岩土研究的重要对象。纵贯于南阳盆地和华北盆地西缘的南水北调中线工程长距离地开挖在不同的上第三系硬粘土中。本文在对南阳盆地、方城宝丰、邯郸永年三渠段上百个原状样的物质组成、物理性质、物化性质、膨胀性和收缩性、强度特性系统测试分析的基础上 ,总结了各类硬粘土的工程地质特性及其形成机理和变化规律 ,并根据不同湿度、围压状态下的试验结果分析了硬粘土的工程环境效应 ,这对于认识上第三系硬粘土在开挖运营条件下的变形破坏机理有着重要的理论和实际意义。     

东海陆缘(闽北段)晚第四纪沉积的硅藻学研究

对东海陆缘 (闽北段 )晚第四纪沉积 4口钻井岩心进行系统的硅藻分析研究,获得丰富的硅藻化石,共发现硅藻 117种和变种,分属于 33个属。根据剖面硅藻组合特征变化,结合最优分割法和对应序分法的计算机运算结果,可以详细划分为 12个硅藻带,自下而上为 :1.Cascinodiscusargus-Cos.wittiomus-Cyclotellastriata硅藻带,2.Cos.blandus-Cyclotellastriata硅藻带,3.Cos.excentricus-Trbliepteychuscocconiformis硅藻带,4.Gomphonema-Cos.blandus-Actnolychusralfsii硅藻带,5.Cos.-Cyclotellastriata-Actinocyclusralfsii硅藻带,6.Cos.-Actinolychusralfsii硅藻带,7.贫乏硅藻带,8.Cos.lineatus-Cos.rothii-Actinolyclusralfsii硅藻带,9.Gomphonema-Cyclotellastriata-Cocconeisplacentulavareuglypta硅藻带,10.Cos.rothii-Cyclotellastriata-Actinolychusralfsi,11.Cymbel laaffinis-Cyclotellastriata-Gomphonema硅藻带,12.Coscinodiscuswittinus-Cyclotellastriata-Epithemiahynd manii硅藻带,建立了该区晚第四纪硅藻组合序列,并探讨其相应的古环境演变。     

从近年来我国地层学的可喜进展谈地层学方法论

“乐平统”作为国际二叠系年代地层系统的最上一个统的全球对比标准 ,是我国学者金玉研究员为首的研究集体多年艰辛研究的结果 ;几乎同时 ,以陈旭研究员为首的科研集体以详尽的资料和全面系统的工作 ,在我国浙江黄泥塘剖面建立了中奥陶统达瑞威尔阶的全球层型剖面点——中国第一个“金钉子”剖面。这两项成就 ,是我国学者在上一世纪对地层学的显著贡献之一 ,从他们精雕细刻的剖面资料和详尽系统的研究成果中 ,可以研读出对“地层时代对比”这一博大精深的理论课题的工作方法 ,由此而诱发出对地层学方法论的探讨 ,从而对某些下结论还为时过早的问题进行必要的评述。     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Damaging properties of ground motions and prediction of maximum response of structures based on momentary energy response

Dynamic damaging potential of ground motions must be evaluated by the response behaviour of structures, and it is necessary to indicate what properties of ground motions are most appropriate for evaluation. For that purpose, the behaviour of energy input process and hysteretic energy dissipation are investigated in this study. It is found that the momentary input energy that is an index for the intensity of input energy is related to the characteristics of earthquakes such as cyclic or impulsive, and to the response displacement of structures immediately. On the basis of these results, a procedure is proposed to predict inelastic response displacement of structures by corresponding earthquake input energy to structural dissipated damping and hysteretic energy. In this procedure the earthquake response of structures is recognized as an input and dissipation process of energy, and therefore structural properties and damaging properties of ground motions can be taken into account more generally. Lastly, the studies of the pseudodynamic loading test of reinforced concrete structure specimens subjected to ground motions with different time duration are shown. The purpose of this test is to estimate the damaging properties of ground motions and the accuracy of the proposed prediction procedure. Copyright © 2002 John Wiley & Sons, Ltd.     

Approximate analysis methods for asymmetric plan base‐isolated buildings

An approximate method for linear analysis of asymmetric‐plan, multistorey buildings is specialized for a single‐storey, base‐isolated structure. To find the mode shapes of the torsionally coupled system, the Rayleigh–Ritz procedure is applied using the torsionally uncoupled modes as Ritz vectors. This approach reduces to analysis of two single‐storey systems, each with vibration properties and eccentricities (labelled ‘effective eccentricities’) similar to corresponding properties of the isolation system or the fixed‐base structure. With certain assumptions, the vibration properties of the coupled system can be expressed explicitly in terms of these single‐storey system properties. Three different methods are developed: the first is a direct application of the Rayleigh–Ritz procedure; the second and third use simplifications for the effective eccentricities, assuming a relatively stiff superstructure. The accuracy of these proposed methods and the rigid structure method in determining responses are assessed for a range of system parameters including eccentricity and structure flexibility. For a subset of systems with equal isolation and structural eccentricities, two of the methods are exact and the third is sufficiently accurate; all three are preferred to the rigid structure method. For systems with zero isolation eccentricity, however, all approximate methods considered are inconsistent and should be applied with caution, only to systems with small structural eccentricities or stiff structures. Copyright © 2001 John Wiley & Sons, Ltd.     

基于栅格空间信息定量化的湖南西部地区生态环境综合评价

以湖南西部地区为研究区域,采用遥感影像作为主要数据源,针对区域主要生态问题,利用栅格数据结构为主的数字环境模型,建立了生态环境质量综合评价模型. 对区域生态环境质量的空间分异格局进行了研究,通过将评价结果与数字高程模型迭加分析,研究了生态环境质量的垂直地带性分布规律,探索适合以山高坡陡为主要地貌特征的山区生态评价方法,结果显示,湖南西部地区生态环境综合指数呈正态分布,大部分地区环境质量属一般. 总体环境状况东南部好于西北部,河谷盆地优于山地. 研究表明,利用遥感和地理信息系统技术进行区域生态环境评价,具有数据采集快速、客观,评价和制图自动化,评价结果空间定位精度高,直观性与实用性强等优点.