隐伏煤田的TM信息提取及地质效果

在遥感图像上,被巨厚第四系冲积层覆盖的煤田区隐伏地质构造和火成岩分布信息是一种非直接的、微弱的隐伏信息,本文以淮北煤田为实例,探讨了从TM图像上提取这种信息的可行性与方法,并分析了其地质效果。     

某铝土矿低空无人机遥感测绘成果精度分析

对于分布散、范围大的铝土矿区,传统测量手段及时获取满足精度要求的矿区测绘资料具有一定难度。采用低空无人机遥感技术,能够快速提供矿山建设所需要的数字线划图、数字高程模型及数字正射影像,实现矿山的数字化与信息化建设。结合某铝土矿测绘面积大、矿区地物要素较少的测绘特征,通过无人机影像快速空三加密以及DLG,DEM,DOM的制作技术,获得低空无人机遥感测绘成果。通过对解析空三加密点精度分析和GPS实测点检查,表明测绘成果满足1∶2 000测图精度要求。     

Analytical methods Of assessing the image quality associated with digital and photographic imaging systems

The introduction of digital cameras for aerial survey photography and use of scanners with processed aerial film present a number of technical questions concerning the way photography is to be acquired in the future. Among the questions to be addressed are the comparative metric properties of images acquired by each system and the associated image quality characteristics. The new digital camera systems will require very careful appraisal, using well-established methods of assessing metric quality already available to survey organisations. The questions concerning image quality are more difficult to answer, as they require very specialised instrumentation if measurements are to be made directly in practice. Over the course of the past several decades a more analytical approach to assessing image quality has emerged, and one that may be used by individuals. The method is particularly effective where information on the micro-image characteristics of products is made available by the manufacturers concerned. An outline is given of some considerations that need to be taken into account when using an analytical approach, with references given for further reading.     

航空摄影最佳曝光量的选择

分解力是评定影象质量的重要指标。本文介绍利用改进后的国产9 w测微密度仪,测定航空软片静态分解力与曝光量的关系。以最大分解力所相应的曝光量作为确定航摄软片感光度的基准,以此为基础,确定航摄底片的最大密度( D _max )、最小密度( D _min )、影象反差(△ D )和平均密度( D _R )本文对国产1022T、1022P、柯达2402、2412等航摄软片进行了研究,其试验结果可作为今后修改航摄规范的基础。     

Atmospheric pollution assessment near potential source of natural aerosols in the South Gobi Desert region,China

ABSTRACT

Rapid economic growth, a high degree of urbanization and the proximity of a large number of desert and semidesert landscapes can have a significant impact on the atmosphere of adjacent territories, leading to high levels of atmospheric pollution. Therefore, identifying possible sources of atmospheric pollution is one of the main tasks. In this study, we carried out an analysis of spatial and temporal characteristics of five main atmospheric pollutants (PM_2.5, PM₁₀, SO₂, NO₂, and CO) near potential source of natural aerosols, affecting seven cities (Wuhai, Alashan, Wuzhong, Zhongwei, Wuwei, Jinchang, Zhangye), located in immediate proximity to the South Gobi deserts. The results, obtained for the period from 1 January 2016 to 31 December 2018, demonstrate total concentrations of PM_2.5 and PM₁₀ are 38.2 ± 19.5 and 101 ± 80.7 μg/m³ exceeding the same established by the Chinese National Ambient Air Quality Standard (CNAAQS), being 35 and 70 μg/m³, respectively. Based on the data from Moderate Resolution Imaging Spectroradiometer (MODIS) for the whole period, Clean Сontinental (71.49%) and Mixed (22.29%) types of aerosols prevail in the region. In the spring and winter seasons maximum concentrations of pollutants and high values of Aerosol Optical Depth (AOD) in the region atmosphere are observed. PM_2.5 and PM₁₀ ratio shows the presence of coarse aerosols in the total content with value 0.43. The highest concentrations of pollutants were in the period of dust storms activity, when PM_2.5 and PM₁₀ content exceeded 200 and 1000 µg/m³, and AOD value exceeded 1. UV Aerosol Index (UVAI), Aerosol Absorbing Optical Depth (AAOD), and Single Scattering Albedo (SSA), obtained from Ozone Monitoring Instrument (OMI), demonstrate the high content of dust aerosols in the period of sandstorms. Analysis of backward trajectories shows that dust air masses moved from North to Northwest China, affecting large deserts such as Taklamakan, Gurbantunggut, Badain Jaran, Tengger, and Ulan Buh deserts.     

基于无人机摄影测量的增减挂钩耕地指标检查与评价方法

土地增减挂钩项目的质量检查的传统流程需到实地逐一核实,检查周期长。本文提出一种基于无人机航摄的检查技术流程,结合研发的野外实地调绘软件系统,提出一种新型的基于无人机航摄的增减挂钩项目质量检查流程,并基于DOM检查构建指标评价体系。流程优化了传统外业检查流程,实现地块的全覆盖内业检查和外业的实时取证,确保成果耕地质量指标的准确性,对土地增减挂钩项目给予客观评价。评价体系的应用选取广西几个县增减挂钩为研究对象,探究体系评价的合理性,初步确定该方法基本可行。     

安徽省含山县土地整理耕地质量评价及其变化研究

土地整理是改善土地利用条件,提高土地质量的有效措施,对土地整理后的耕地质量进行评价是土地整理重要工作之一。从耕地质量的内涵和土地整理项目的基本要求出发,选取耕地自然条件和耕地利用条件2个基本因素和12个影响因子,将特尔斐法与层次分析法相结合,确定各因子权重,构建基于土地整理的耕地质量评价指标体系。以安徽省含山县铜闸镇土地整理项目为例,采用传统的土壤调查与3S技术相结合的方法,分析土地整理复垦过程中耕地质量时空格局变化,得出整理前、后耕地质量的级别变化。研究结果表明,通过土地整理,研究区的耕地质量空间分布和级别发生了很大变化,整理后一级、二级、三级质量的土地比整理前分别增加了7.20%,11.95%和0.65%,四级、五级则分别减少了15.65%和4.16%,整理后的耕地质量总体水平是整理前的1.291倍。     

应用于SAR图像配准的自适应SIFT特征均匀分布算法

SAR图像配准要求提取出稳定且分布均匀的同名点,但是传统的SIFT算法没有考虑特征点的空间分布情况,提取的特征呈块状分布。针对SAR图像数据的特点,提出了一种自适应控制SIFT特征均匀分布算法,利用局部纹理特征,并结合最优化筛选策略,在保证特征点稳定性和准确性的同时,自适应控制特征在不同空间的分布情况,实现SIFT特征点在图像空间和尺度空间的合理分布。最后从提取效率、匹配正确率和分布质量等方面进行对比试验,验证了算法应用于SAR图像配准的能力。     

车载移动测量系统在大比例尺地形图数学精度检测中的应用

研究了车载移动测量系统在大比例尺地形图数学精度检测中的应用。首先在小范围内对其进行了相关试验,得到其有效性后,对某市全市域的地形图进行了抽样检测;对车载移动测量检验与常规方法检验在外业数据采集、内业数据处理及存储量等几方面进行了比较,分析了车载移动测量检验方法的优劣性,为提高测绘质检效率提供了一种新方案。     

利用GLAS激光测高数据评估DSM产品质量及精度优化

提出了一种利用卫星激光测高数据直接优化提升数字表面模型（DSM）产品精度的方法。选取境外中亚地区的资源三号DSM开展试验,通过采用多准则约束方法提取激光高程控制点,分别利用偏度、中值、线性、二次多项式等进行DSM误差修正,发现4种模型均能有效消除DSM系统误差,其中基于二次多项式的方法更适用于平地和丘陵地貌,线性模型更适用于高山地貌。试验验证了采用卫星激光测高数据优化境外DSM技术流程的可行性,最终可提高DSM的绝对高程精度。