利用GPS组合观测值探测与修复周跳算法实现

本文在目前常用的周跳探测和修复方法的基础上,根据相位减伪距组合,Melbourne-Wübbena组合,电离层残差组合三种GPS组合观测值优缺点互补,将这三种组合观测值有机结合产生可靠的探测与修复周跳算法并用程序实现,通过实例分析证明此算法能够探测和修复任意大小的周跳。     

The ionospheric eclipse factor method (IEFM) and its application to determining the ionospheric delay for GPS

A new method for modeling the ionospheric delay using global positioning system (GPS) data is proposed, called the ionospheric eclipse factor method (IEFM). It is based on establishing a concept referred to as the ionospheric eclipse factor (IEF) λ of the ionospheric pierce point (IPP) and the IEF’s influence factor (IFF) . The IEF can be used to make a relatively precise distinction between ionospheric daytime and nighttime, whereas the IFF is advantageous for describing the IEF’s variations with day, month, season and year, associated with seasonal variations of total electron content (TEC) of the ionosphere. By combining λ and with the local time t of IPP, the IEFM has the ability to precisely distinguish between ionospheric daytime and nighttime, as well as efficiently combine them during different seasons or months over a year at the IPP. The IEFM-based ionospheric delay estimates are validated by combining an absolute positioning mode with several ionospheric delay correction models or algorithms, using GPS data at an international Global Navigation Satellite System (GNSS) service (IGS) station (WTZR). Our results indicate that the IEFM may further improve ionospheric delay modeling using GPS data.     

CHRIS／PROBA高光谱数据的预处理

针对CHRIS／PROBA高光谱遥感数据的特点,对CHRIS影像进行去条带处理、辐射校正、大气校正等预处理,获得较好质量的影像,为影像的进一步分析和实际应用提供保障。     

TM影像几何校正算法的精度比较

同大多数的线阵推扫式影像相比,TM影像作为双向扫描型的影像其几何校正方法有其特殊性和复杂性。针对这个问题,本文简要介绍了一般多项式、空间斜墨卡托投影、有理函数模型等几种几何近似校正算法,并利用广州地区的TM影像进行了各种试验分析和精度比较。结果表明:同其他方法相比,空间斜墨卡托投影是一种较好的算法,校正精度最高,能够达到一个像素左右,而且该方法不受地形起伏的影响,无需地面高程信息。     

节理岩体卸荷强度特性的试验研究

卸荷状态工程岩体的强度特性与传统的加载岩体有本质的区别。目前对于岩石卸荷强度特性的研究比较多见,但对于含节理的岩体在卸荷应力状态下的强度特性,尤其是节理面对其强度的影响研究实属少见。本文通过岩体三轴模拟试验研究了卸荷应力状态下节理岩体的破坏特征,突出考虑了节理面性质对卸荷强度的影响,在此基础上提出了节理岩体卸荷强度准则的一般表达式并进行了对比验证。     

Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.     

Composition-Induced Variations in SIMS Instrumental Mass Fractionation during Boron Isotope Ratio Measurements of Silicate Glasses

An analytical artefact is reported here related to differences in instrumental mass fractionation between NIST SRM glasses and natural geological glasses during SIMS boron isotope determinations. The data presented demonstrated an average 3.4‰ difference between the NIST glasses and natural basaltic to rhyolitic glasses mainly in terms of their sputtering-induced fractionation of boron isotopes. As no matrix effect was found among basaltic to rhyolitic glasses, instrumental mass fractionation of most natural glass samples can be corrected by using appropriate glass reference materials. In order to confirm the existence of the compositionally induced variations in boron SIMS instrumental mass bias, the observed offset in SIMS instrumental mass bias has been independently reproduced in two laboratories and the phenomenon has been found to be stable over a period of more than one year. This study highlights the need for a close match between the chemical composition of the reference material and the samples being investigated.     

Recommended Values of 239Pu, 240Pu and 239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.     

Effect of volatiles erupted from Mesozoic and Cenozoic volcanic activities on paleo-environmental changes in China

Based on the determination of composition of volcanic volatiles and petrologic estimation of the total mass of volatiles erupted, we showed important advances in the study of the impact of Mesozoic and Cenozoic volcanic activities on paleo-environmental changes in China. The volcanic activities include western Liaoning and Zhangjiakou Mesozoic intermediate-acidic explosive eruptions, southern Tibet and Shanwang Cenozoic volcanism, and Mt. Changbai volcanic eruption around one thousand years ago. The paper predominantly discusses the earth’s surface temperature changes, ozone depletion, acidic rain formation and mass mortalities of vertebrate induced by the Mesozoic and Cenozoic volcanism in China. __________ Translated from Bulletin of Mineralogy, Petrology and Geochemistry, 2007, 26(4): 319–322 [译自: 矿物岩石地球化学通报]     

努力提高三维地震勘探精度，为西部煤炭工业做出新贡献

以国家重大产业技术开发专项“西部煤炭资源高精度三维地震勘探技术”项目的由来、意义和总体研究目标为引,概括的介绍了项目依托工程中各个专项技术研究完成情况,并对非均匀介质成像技术、高精度三维地震静校正技术、高密度采集技术、特观技术、岩性反演技术、属性体解释技术等六项重大关键技术取得的突破性进展进行了重点说明。指出随着我国煤炭生产重点的逐步西移,应加强诸如叠前、叠后深度偏移技术的研究,以解决复杂山区三维地震面元内地震反射波散射问题,提高其三维地震勘探精度,为西部煤炭工业做出新贡献!