Prediction of application scope of vertical fracture strike based on scattered wave fracture orientation function

Fracture system plays a very important role in the enrichment and accumulation of oil and gas in the reservoirs. Based on scattering wave information,Fracture Orientation Function( FOF) was built,which can be used to predict the fracture orientations. However,this method has only been verified by physical experiments without studies on the application scope. In this study,based on the linear sliding theory,FOF of the scattering wave was applied to the numerical simulation and the application scope was further studied according to fracture flexibility tensor. According to the fractures filled with gas and liquid,numerical simulation was conducted on the models with various fracture flexibilities. Numerical simulation results were used to inverse fracture orientation with the aid of the FOF of the scattering wave. The results show that it is workable to predict the vertical fracture orientation with the FOF of the scattering wave. Application of this method is more effective when the fractures are filled with gas than liquid. Moreover,the application scope can be predicted by the fracture flexibility.     

一次霾天气条件下石家庄上空大气气溶胶数浓度的飞行探测与特征分析

利用2010年8月30日河北省石家庄一次霾天气条件下的气溶胶飞行探测资料,分析了石家庄地区上空658—6933 m高度范围内大气气溶胶粒子平均数浓度、平均直径的垂直分布特征和9个水平飞行高度上的谱分布特征。结果表明:轻度霾天气条件下的气溶胶平均数浓度为325个/cm3,平均直径为0.169μm。在约1000 m高度以下,气溶胶平均数浓度随高度的增加呈线性减少趋势。粒径也随高度增加而减小,由0.187μm减小至0.164μm。1000 m高度以上,气溶胶平均数浓度随高度减少趋势变缓,粒子平均直径在0.167~0.171μm范围内波动。9个不同高度上的谱分布都呈单峰型,随着高度增加,谱宽变小,峰值向小尺度方向移动。后向轨迹计算分析表明:污染气团的远距离输送可能是导致大气1500 m高度层气溶胶数浓度突增的原因。     

Lidar Methods for Observing Mineral Dust

Lidar methods for observing mineral dust aerosols are reviewed.These methods include Mie scattering lidars,polarization lidars,Raman scattering lidars,high-spectral-resolution lidars,and fluorescence lidars.Some of the lidar systems developed by the authors and the results of the observations and applications are introduced.The largest advantage of the lidar methods is that they can observe vertical distribution of aerosols continuously with high temporal and spatial resolutions.Networks of ground-based lidars provide useful data for understanding the distribution and movement of mineral dust and other aerosols.The lidar network data are actually used for validation and assimilation of dust transport models,which can evaluate emission,transport,and deposition of mineral dust.The lidar methods are also useful for measuring the optical characteristics of aerosols that are essential to assess the radiative effects of aerosols.Evolution of the lidar data analysis methods for aerosol characterization is also reviewed.Observations from space and ground-based networks are two important approaches with the lidar methods in the studies of the effects of mineral dust and other aerosols on climate and the environment.Directions of the researches with lidar methods in the near future are discussed.     

A new analysis of the ESO Very Large Telescope (VLT) observations of Titan at 2 μm

We have performed an analysis of ESO Very Large Telescope (VLT) observations of Titan at 2 μm. The data were acquired with the Nasmyth Adaptative Optics System Near-Infrared Imager and Spectrograph (NAOS/CONICA), on the 16th of January 2005, that is 2 days after the landing of the Huygens probe (Hirtzig et al., 2007). The data consist in 21 spectra taken along two diameters of Titan’s disk at wavelengths between 2.03 and 2.5 μm. This range covers a part of the 2 μm methane window and the adjacent band. The data received a preliminary analysis in a recent paper (Negrão et al., 2007), essentially focused on the surface albedo near Huygens landing site. In this work, we perform an in-depth analysis to retrieve information about several aspects: the latitude haze distribution in the stratosphere and in the low atmosphere, the latitudinal variation of the surface albedo and its spectral behaviour. Also, this analysis allowed us to make sensitivity tests on the influence of the scatterer profiles on the retrieved surface albedo and its spectral slope. The news analysis confirms that, as was the case with VIMS observations at the same epoch, the Northern (currently winter) Hemisphere contains more haze than the southern one (Summer Hemisphere). The sensitivity tests show that the scatterer profiles have just a little impact on the surface albedo and its spectral slope. The analysis seems to confirm the presence of H₂O and CH₄ ices.     

灌注桩后注浆单桩竖向极限承载力研究

近年来,后注浆技术得到了广泛的应用。钻孔灌注桩可大大降低建筑物的沉降,并使建筑物的沉降更加均匀,文章介绍后注浆工艺的承载力提高机理及在天津地区的几个工程实例,分析了注浆前后单桩竖向极限承载力对比情况及影响单桩竖向极限承载力的几个因素。     

吉林延边地区浅成热液金(铜)矿床的~(40)Ar/~(39)Ar激光探针测年与成矿时代讨论

延边地区是中国东北部陆缘浅成热液金铜矿床发育的地区之一,广泛发育着浅成热液金矿床、中温热液金(铜)矿床和中深成中高温热液富金铜矿床(类斑岩型);富金铜矿床的成矿时代发生在105～102 Ma,为了进一步确定浅成热液金矿床与中深成中高温热液富金铜矿床的成矿动力学背景,采用流体包裹体的~(40)Ar/~(39)Ar激光探针定年法,对该区典型浅成热液金矿床进行了精细的年代学测定,获得刺猬沟金矿床、五星山金矿床和杜荒岭金矿床的脉石矿物石英流体包裹体的~(40)Ar/~(39)Ar等时线年龄分别为(141±7)Ma、(123±7)Ma和(107±6)Ma,其中刺猬沟金矿床((141±7)Ma)和五星山金矿床((123±7)Ma)的脉石矿物石英流体包裹体含有过剩放射性成因~(40)Ar,而杜荒岭金矿床((107±6)Ma)的脉石矿物石英流体包裹体几乎不含或含极少量过剩放射性成因~(40)Ar。结合最新获得的相关地质体的精细年代学成果,认定该区浅成热液金矿床成矿作用均发生在早白垩世晚期,或发生在早白垩世晚期火山喷发、浅成岩浆就位之后,其形成环境与富金铜矿床一致,为古太平洋板块向亚洲大陆正北向俯冲转入Izanagi-Farallon板块西向俯冲的构造转换期。     

西藏尼玛盆地油页岩的发现及其地质意义

<正>青藏高原在长期复杂的演化过程中发育了一系列时代与类型不同的含油气盆地,但由于古生代以来冈瓦纳大陆裂解和特提斯洋的开启-闭合-造山作用的影响,特别是新生代以来印度-欧亚板块强烈碰撞造山和高原隆升作用的影响,含油气盆地受到了不同程度的改造,加之恶劣的自然环境,青藏高原成为中国目前油气地质研究和勘探程度最低的地区。     

无线电波透视快速勘探技术及其应用

无线电波透视技术作为探测煤层工作面内地质构造的一种较为成熟方法,具有快速、轻便、透距大、成本低等优点,但也存在现场观测系统单一、耗时长、接收操作员劳动强度大等缺点。通过对无线电波透视技术现场观测系统的改进,提出"一发双收"数据采集方法及数据校正处理技术。由于"一发双收"的数据是由两个接收机同时接收,因此其数据必须经过校正才能使用。在数据采集中:一是要求两台接收机在一条测线同一地点的场强值差别很小;二是要求做到数据采集中至少存在一个重合接收点,且其重合点数据比值应在0.98～1.02范围内。"一发双收"数据使用无线电波透视CT软件系统处理软件进行拼接,若数据曲线出现阶梯跳跃,则应把低值(或者高值)乘以该重合点数据的比值以保证曲线平滑。在张集煤矿1114(3)工作面探测实践中,使用该技术探测画出其工作面存在三个主要异常区:1#异常区在退尺20~100m处为断层影响区;2#异常区退尺480~560m处为断层影响区;3#异常区在退尺1200~1300m处为断层和薄煤影响区。目前该工作面探测区已经回采,探测结果与实际回采验证结果比较吻合,说明一发双收的探测方式可行。     

单一松软煤层瓦斯抽采工艺数值模拟

借鉴油气藏数值模拟理论、技术和方法,对单一松软煤层的瓦斯抽采工艺进行了研究分析。根据单一松软煤层特点,提出了单一松软煤层的几何模型技术——单直径球型孔隙模型,在此基础上建立了煤层瓦斯抽采的地质和数理模型,并根据网格差分方法推导出数值解。以实际生产数据对新模型及其数值解进行验证,结果表明该模型可以用于指导单一松软煤层瓦斯抽采工艺的确定。     

Spatial patterns and environmental associations of deep scattering layers in the northwestern subtropical Pacific Ocean

The mesopelagic communities are important for food web and carbon pump in ocean, but the large-scale studies of them are still limited until now because of the difficulties on sampling and analyzing of mesopelagic organisms. Mesopelagic organisms, especially micronekton, can form acoustic deep scattering layers (DSLs) and DSLs are widely observed. To explore the spatial patterns of DSLs and their possible influencing factors, the DSLs during daytime (10:00–14:00) were investigated in the subtropical northwestern Pacific Ocean (13°–23.5°N, 153°–163°E) using a shipboard acoustic Doppler current profiler at 38 kHz. The study area was divided into three parts using k-means cluster analysis: the northern part (NP, 22°–24°N), the central part (CP, 17°–22°N), and the southern part (SP, 12°–17°N). The characteristics of DSLs varied widely with latitudinal gradient. Deepest core DSLs (523.5 m±17.4 m), largest nautical area scattering coefficient (NASC) (130.8 m2/n mile2±41.0 m2/n mile2), and most concentrated DSLs (mesopelagic organisms gathering level, 6.7%±0.7%) were observed in NP. The proportion of migration was also stronger in NP (39.7%) than those in other parts (18.6% in CP and 21.5% in SP) for mesopelagic organisms. The latitudinal variation of DSLs was probably caused by changes in oxygen concentration and light intensity of mesopelagic zones. A positive relationship between NASC and primary productivity was identified. A four-months lag was seemed to exist. This study provides the first basin-scale baselines information of mesopelagic communities in the northwest Pacific with acoustic approach. Further researches are suggested to gain understandings of seasonal and annual variations of DSLs in the region.