花岗岩单裂隙渗流传热特性试验

基于岩石裂隙渗流传热试验系统,以蒸馏水为换热工质,针对预制平滑裂隙与粗糙裂隙的花岗岩岩样,开展不同试验温度与水流条件下的单裂隙对流换热特性试验研究。试验结果表明：①同一温度水平下,对流换热系数的量值与流量呈正相关关系,但对流换热系数的增幅大于流量的增幅,随岩石基质温度的升高,相同流量水平下的对流换热系数呈增大趋势;②与平滑裂隙试验结果相比,粗糙裂隙面的对流换热强度有所提高,但增幅不大;③沿渗流路径,裂隙面局部对流换热强度的演化呈现多波峰的非线性特征,其中粗糙裂隙的非线性更加强烈。但二者均存在由进水口至出水口,换热强度逐渐减弱的特征。④努塞尔数与普朗特数1/3次方的商与雷诺数较好地满足幂指数关系,随着试验温度的升高,这种关系逐渐向线性转变。     

不同节理粗糙度类岩石材料三轴压缩力学特性试验研究

粗糙度是影响节理岩体强度与变形特性的重要因素之一。首先使用3D 打印机制作模具,并浇筑形成不同粗糙度（节理粗糙度系数JRC=2、7、12、17、22）的节理岩石试样。采用GCTS高温高压动静岩石三轴试验系统,对含有不同粗糙度节理岩石试样进行了三轴压缩试验,获得了不同粗糙度节理岩石试样的三轴应力–应变曲线,分析了JRC对岩石三轴强度和变形特性的影响规律,在三轴加载过程中采用声发射测试系统,分析了不同粗糙度节理岩石试样的声发射特性。运用数字三维视频显微系统观察节理面形态,讨论了不同围压下节理岩石试样峰值强度与JRC之间的关系。研究结果表明,节理面的存在直接导致节理岩石试样强度的大幅度降低,JRC对岩石破坏裂纹的形态、数量和空间分布特征亦有很大的影响,随着JRC值的增大,岩石节理面的抗剪强度增大,岩石试样的三轴抗压强度也会增大,岩石试样由脆性破坏转变为延性破坏。     

Hydrodynamic behaviour of coarse bioclastic sand from shelly cheniers

Cheniers from Mont‐Saint‐Michel bay (France) are coarse shelly sand ridges migrating on the mudflat up to the salt marshes where they accumulate and merge in a littoral barrier. In this macrotidal setting and low wave forcing, the cheniers are rarely submerged. However, they are found to move up to several metres during coincidence of spring tide and wave activity. Their processes of migration, morphology and internal structure (composition of the beddings, grain size, sorting and grain arrangement) are thought to be closely related to the hydrodynamic behaviour of the coarse and shelly sediment. This paper focuses on the hydrodynamic behaviour of bioclastic sand sampled from the cheniers: settling velocities of the shell fragments were measured using a 2 m long sedimentation tube. Thresholds of motion under unidirectional current, velocity and turbulence vertical profiles were characterized in a small recirculating flume using Laser Doppler Anemometry (LDA). The flat‐shaped bioclastic particles feature low settling velocities and reveal a good resistance to the re‐suspension effect of the flow when imbricated in a sediment bed. The shear stress in the bottom boundary layer has been measured in the viscous and log sub‐layers. Nikuradse roughness heights (k_s) for shell debris beds of different sizes have been quantified. It is found that k_s ≈ 2·56d₅₀. This value is close to the ones used for classic rounded sand grains despite their major differences of shape. The dual behaviour of the shell fragments (low settling velocity, good resistance to unidirectional flow) should be considered as a key to understanding how this coarse material is transported across the tidal flat, and finally accumulated as cheniers. Further flume experiments including wave activity and tidal fluctuations are necessary to better quantify these complex processes. Copyright © 2010 John Wiley & Sons, Ltd.     

生态护坡基材土-岩接触面原位剪切试验研究

基材土-岩接触面剪切力学性能是生态护坡体系长久稳定的关键,相关研究可为解决基材脱落难题、完善生态防护技术体系提供必要依据和指导。采用自制的原位剪切仪对4种不同粗糙起伏的基材土-岩接触面进行了原位剪切试验,结果表明,基材土-岩接触面剪切应力-位移表现出典型的软化特性,具有明显的初始线弹性变形、弹塑性变形、峰后软化以及残余剪切变形4个阶段。分析发现,文中试验条件下凸起高度算数平均偏差Ra在4 mm以下时,峰值剪切强度增加速度较快,随后呈逐渐减弱趋势;残余剪切强度、峰值剪切位移以及进入残余阶段的剪切位移与粗糙凸起高度算数平均偏差呈近线性正相关关系。可见实施生态护坡时合理地控制坡面粗糙起伏,有助于提高土-岩接触面峰值剪切强度和残余剪切强度,改善其变形性能,对防护体系的长期整体稳定具有促进作用。     

粗糙床面风廓线的转折特征及其物理意义

为了进一步认识粗糙床面空气动力学粗糙度的物理意义,理解空气动力学粗糙度对动量传递和跃移起动的影响机制,从风洞试验测定的粗糙床面风廓线转折特征入手,分析了粗糙床面的空气动力学性质并提出了内边界层动量传递及近壁区沙粒起动的可能机制。结果表明,细高粗糙元（方向比率在4~20之间）和孔隙粗糙元（孔隙度在0.15~0.75）风廓线呈现4个转折段,对应的湍流垂直分层为近壁区-尾涡层（Z≤0.15H~0.5H）、内边界层-尾涡层过渡层（0.15H≤Z≤0.75H）、内边界层（0.3H~0.75H≤Z≤1.2H~6H）和内边界层与外边界层过渡层等。粗矮粗糙元（粗糙元的方向比率在0.4~1.25之间）风廓线存在几个转折段,对应气流垂直分层为近壁区-尾涡层（Z≤1H~1.5H）和内边界层（1H~1.5H≤Z≤7H~35H）等。细高粗糙元和孔隙粗糙元覆盖21组床面（侧影盖度在0.007~0.50,粗糙元的高度在10~100 mm）的内边界层内空气动力学粗糙度在0.07~30.74 mm之间,比内边界层以上或以下过渡层的空气动力学粗糙度高几个数量级到数倍;内边界层摩阻风速的0.50~1.66 m\5s-1之间,是内边界层以下过渡层的1.5~10倍、内边界层以上过渡层的摩阻风速的1.1~2.8倍。内边界层的空气动力学粗糙度和摩阻风速分别代表了粗糙床面对气流阻力特征和湍流切应力。内边界层以下过渡层湍流切应力与粗糙元之间光滑地表所受切应力关系不大,而近壁层切应力与光滑地表所受切应力直接相关。近壁层猝发过程上抛运动和内边界层湍流猝发过程下扫运动耦合关系是内边界层的一部分动量传递到近壁区并导致沙粒起动的可能机制。     

沙粒起动风速的影响因素研究

通过对风场中沙床表面沙粒的受力分析,建立了坡面沙粒起动风速的理论公式,并将计算结果与已有实验研究结果进行了比较,结果表明,给出的理论计算公式是正确的。在此基础上,详细讨论了坡角、风向角、荷质比、电场力以及空气上升力对坡面沙粒起动风速的影响。其结果是：坡角一定时,沙粒的起动风速随风向角的增大而增大;风向一定时,背风坡沙粒的起动风速随坡角的增大而变小;弱电场中电场力对沙粒起动风速几乎没有影响,强电场中随着沙粒荷质比的增大,起动风速明显减小;空气上升力明显使沙粒起动风速减小。     

A scheme for pixel-scale aerodynamic surface temperature over hilly land

Hilly-land satellite pixel-scale aerodynamic surface temperatures (AdST) are investigated using LAS (Large Aperture Scintillometer) and meteorological observations during 21-22 May 2001, indicating that the calculated temperatures are predominantly subject to estimated roughness lengths and, to a less extent, to estimated Bowen ratios, with errors to within 3.0 K between the AdST calculations and hilly radiometric surface temperatures retrieved from satellite data with the split window model. The errors depend heavily on the model used and the zenith angles and azimuth of the satellite and sun with respect to the observational site.     

Influence of Obstacles on the Aerodynamic Roughness of the Netherlands

The aim of this study was to analyse the influence of large- and small-scale obstacles (orography, tree lines, and dikes) on the effective aerodynamic roughness of the Netherlands, a relatively flat, small-scale landscape. The roughness averaging approach was based on drag coefficients. The effective roughness was locally dominated by small-scale obstacles such as tree lines and dikes. Even at a regional scale (40,000 km2), the small-scale obstacle drag was of the same order of magnitude as the shear stress due to landuse. The neglect of those obstacles on a regional scale would result in approximately 10% overestimated averaged windspeed at 10~m above the surface. It was concluded that small-scale obstacles need to be taken into account to calculate the aerodynamic roughness of flat landscapes. Orography was of minor importance in this lowland country.     

岩体节理表面几何特性描述

岩体节理表面几何特征对岩体变形、刚度、剪切强度和水渗导性有重要影响,一般用节理粗糙度系数（ＪＲＣ）、节理吻合系数（ＪＭＣ）来描述。本文用节理表面分维（ＪＳＦ）来描述节理表面形态的复杂性,为节理表面几何特征描述提供了一个新的方法。     

On the roughness of Mesozoic oceanic crust in the western North Atlantic

Seismic reflection profiles from Mesozoic oceanic crust around the Blake Spur Fracture Zone (BSFZ) in the western North Atlantic have been widely used in constraining tectonic models of slow-spreading mid-ocean ridges. These profiles have anomalously low basement relief compared to crust formed more recently at the Mid-Atlantic Ridge at the same spreading rate. Profiles from other regions of Mesozoic oceanic crust also have greater relief. The anomalous basement relief and slightly increased crustal thickness in the BSFZ survey area may be due to the presence of a mantle thermal anomaly close to the ridge axis at the time of crustal formation. If so, the intracrustal structures observed may be representative of an atypical tectonic regime.