European Solar Telescope: Progress status

In this paper, the present status of the development of the design of the European Solar Telescope is described. The telescope is devised to have the best possible angular resolution and polarimetric performance, maximizing the throughput of the whole system. To that aim, adaptive optics and multi‐conjugate adaptive optics are integrated in the optical path. The system will have the possibility to correct for the diurnal variation of the distance to the turbulence layers, by using several deformable mirrors, conjugated at different heights. The present optical design of the telescope distributes the optical elements along the optical path in such a way that the instrumental polarization induced by the telescope is minimized and independent of the solar elevation and azimuth. This property represents a large advantage for polarimetric measurements. The ensemble of instruments that are planned is also presented (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

EST Adaptive optics performance estimations

We give a short overview of the Adaptive Optics (AO) and Multi‐conjugate Adaptive Optics (MCAO) system of the planned 4 m European Solar Telescope (EST). The optimization process of the AO / MCAO parameters is shown, including the parameters and layout of the Shack‐Hartmann wavefront sensor setup and the DMs. We show the expected performance of the AO and MCAO system (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

液闪法测量水中氚放射性活度的淬灭效应

采用液体闪烁计数法进行放射性同位素测量时存在淬灭效应,而且几乎每个样品的淬灭程度都不同,并影响测量精度。采用液体闪烁计数法测量水中氚的放射性活度,淬灭是难以避免的,因此要进行淬灭校正,才能使不同淬灭程度的样品的测量结果具有可比性。淬灭校正的方法有很多,外标准校正法是一种比较可靠的方法。文章采用氚外标准校正法进行实验,得出淬灭校正曲线即探测效率E与淬灭参数SQP(E)的关系式为E=0.001 3SQP(E)-0.707 6,经过样品验证,该曲线是可靠的。采用外标准校正法适合于大批样品的测量。     

波束角偏差对多波束测量的影响及校正

波束角偏差是影响多波束系统测量精度的因素之一,严重时导致测量的海底地形成凸凹形状的伪地形。论述了波束角偏差产生的原因以及对多波束系统测量精度的影响,介绍了借用EM系列多波束系统配置的横向参数校准软件对波束角偏差进行校正的方法,经实际应用,该方法很好地校正了波束角偏差,提高了测量数据的精度。     

Fully coupled time-domain simulation of dynamic positioning semi-submersible platform using dynamic surface control

A fully coupled 6-degree-of-freedom nonlinear dynamic model is presented to analyze the dynamic response of a semi-submersible platform which is equipped with the dynamic positioning （DP） system. In the control force design, a dynamic model of reference linear drift frequency in the horizontal plane is introduced. The dynamic surface control （DSC） is used to design a control strategy for the DP. Compared with the traditional back-stepping methods, the dynamic surface control combined with radial basis function （RBF） neural networks （NNs） can avoid differentiating intermediate variables repeatedly in every design step due to the introduction of a first order filter. Low frequency motions obtained from total motions by a low pass filter are chosen to be the inputs for the RBF NNs which are used to approximate the low frequency wave force. Considering the propellers’ wear and tear, the effect of filtering frequencies for the control force is discussed. Based on power consumptions and positioning requirements, the NN cen-ters are determined. Moreover, the RBF NNs used to approximate the total wave force are built to monitor the disturbances. With the DP assistance, the results of fully coupled dynamic response simulations are given to illustrate the effectiveness of the proposed con-trol strategy.     

商业平板式超滤膜包完整性检验：对海洋胶体生物地球化学研究的启示

The performance and integrity of a cassette cross-flow ultrafilter(Pellicon 2, Millipore) are examined with a suite of macromolecules of different molecular masses. The retention coefficient during the cross-flow ultrafiltration experiments increases with increasing molecular mass and reaches 90% with 10 kDa dextran in both milli-Q water and ultrafiltered seawater media. Based on a 90% retention coefficient, the molecular mass cut-off for the ultrafiltration membrane is defined at 10 kDa, which is ten times(1 kDa) that rated by the manufacturer. To further validate the accuracy of the laboratory calibration, the samples from the lower Zhujiang River and the Jiulong River Estuary are ultrafiltered with the cassette ultrafiltration membrane and the colloidal organic carbon abundances in these samples are quantified with the ultrafiltration permeation model based on time series permeation subsamples. The colloidal organic carbon abundances are 5.8%–21.1% in the Jiulong River Estuary and 5.6%–11.0% in the lower Zhujiang River. These are consistent with the reported values for both estuaries as well as with the colloidal organic carbon abundances in marine environments over the coastal and open oceans with 10 kDa cut-off membranes. Therefore, these field data support the laboratory calibration result and indicate the validity of the experimental and quantification procedure adopted. The discrepancy between the nominal molecular mass cut-off and the actual pore size of the ultrafiltration membrane should be of great concern for research in colloidal and nanoparticle biogeochemistry. Careful examination of the membrane integrity should be taken during ultrafiltration experiments in order to avoid misleading molecular mass cut-off information.     

天宫一号超光谱仪红外谱段的实验室定标

天宫一号超光谱仪红外谱段光谱范围是8.0—10.5 μm,采用红外线列焦平面推扫方式成像.通过实验室定标实验,获得了每个探测元对应的辐射响应系数和响应线性度,并得到每一探测元的动态范围与噪声等效温差,验证了图像输出校正效果,同时,根据定标实验误差来源分析计算了最终的辐射定标误差.     

组合导航中一种新息自适应卡尔曼滤波算法

全球定位系统/航位推算组合导航定位中,由于目标运动的不确定性,GPS接收机与DR器件接收的数据存在噪声,使预置目标运动模型通常很难得到较高跟踪精度,针对应用常规卡尔曼滤波进行组合导航解算由于噪声统计特性未知而引起滤波不稳定的问题,本文提出了一种基于新息序列的量测计算进行自适应估计的卡尔曼滤波算法。该算法通过对新息方差强度进行极大似然估计,将新息计算引入卡尔曼滤波器的增益计算,达到控制发散的目的。最后对改进的算法与一般卡尔曼滤波算法做了对比仿真试验分析,结果表明了改进算法的有效性。     

GNSS约束的MERSI/FY-3A PWV校准方法EI北大核心CSCD

精确的水汽信息对于短临天气预警和长期气候监测具有重要意义。本文针对搭载在我国第2代极轨卫星风云三号A星(FY-3A)上中分辨率光谱成像仪(medium-resolution spectral imager,MERSI)获取水汽精度较低的现状,提出一种GNSS约束的MERSI/FY-3A PWV校准方法。首先,对MERSI/FY-3A的PWV段产品进行处理得到水汽日产品,并利用GNSS和无线电探空(radiosonde,RS)数据对其进行评估;然后,根据PWV的季节分布特性,构建GNSS约束的MERSI/FY-3A PWV季节自适应校准模型;最后,分别利用GNSS、RS和再分析资料对校准后的MERSI/FY-3A水汽进行对比,验证提出方法的有效性。研究表明:本文提出的PWV校准方法,能够有效改善MERSI/FY-3A水汽日产品和旬产品的精度,改善率分别为58.63%和68.72%。该方法可为遥感水汽快速校准研究提供重要的理论依据。     

结合空间上下文与慢特征分析的多光谱影像变化检测

为了提高多光谱影像变化检测的精度,本文提出了一种结合空间上下文与慢特征分析的方法。首先采用自适应空间上下文提取算法围绕像素构建自适应区域,探索像素周围的上下文信息;然后通过迭代慢特征分析,由相应像素周围的成对自适应区域定量计算成对像素之间的变化强度,增强变化区域与未变区域的可分性;最后生成变化强度图像,采用大津阈值法作二值分类,将变化强度图划分为二值变化检测图。利用Landsat 7卫星ETM+传感器的图像,与4种基于代数的方法及基于变换的方法进行对比试验,结果表明,本文方法在降低漏检方面有所改善,提高了召回率。