加强目标观测,服务防灾减灾

以深入浅出的方式介绍了目标观测的定义、历史、确定目标观测敏感区的方法,以及实施目标观测与防灾减灾的关系;并以欧洲中期天气预报中心目标观测业务化为例,简明地概括了目标观测的实施过程;结合国内目标观测研究现状,对中国目标观测的未来提出了看法。     

基于自适应峰值分解的广义局部频率时频分析方法

往复压缩机振动信号具有复杂的多源冲击特性,表现较强的非平稳性,传统的时频分析方法难以提取有效的故障特征.以傅氏变换为基础的传统频率概念和以希尔伯特变换为基础的瞬时频率概念存在固有缺陷,提出一种广义局部频率的概念,并结合自适应峰值分解方法,实现信号时频分布的构造途径;与HHT时频分析方法进行仿真对比,并应用到往复压缩机振动信号故障特征提取.结果表明,基于自适应峰值分解的广义局部频率方法有效揭示往复压缩机不同故障的多源冲击振动信号时频特征,为往复压缩机故障诊断提供一种新的手段.     

利用TGO软件的点校正功能实现物探测量GPS控制网待定点的解算

基于泌阳凹陷高精度三维地震采集测量GPS控制测量项目,作者论述了在TGO软件中利用点校正功能求解控制网中待定点坐标方法。通过与约束平差结果的比较,证明了此方法的可行性。     

一种自适应匹配子空间亚像元目标探测方法

为了克服基于线性混合模型的高光谱遥感影像亚像元目标探测方法的缺陷, 提出了一种基于全限制性线性分解的自适应匹配子空间探测方法。首先利用交叉相关光谱匹配技术求得各个像元所含端元类别信息, 然后根据端元类别信息和全限制性分解的结果构造自适应匹配子空间探测算子, 利用端元类别信息在探测中动态选择端元, 降低端元数目估计偏差对探测结果的影响, 提高探测器对目标与背景的可分性。实验证明, 该方法与其他基于线性混合模型的亚像元目标探测方法相比, 可以更好地克服端元数目估计偏差对探测结果的影响, 无论是端元个数低估还是     

基于波束控制的卫星导航接收机抗干扰算法研究

卫星导航接收机抗干扰技术是接收机设计的一项关键技术。在研究基于功率反演的空域自适应抗干扰算法基础上,提出了采用基于波束控制的抗干扰算法,并进行了仿真计算,结果表明：该算法明显提高了接收机抗干扰性能。     

大气掩星反演误差特性初步分析

GPS大气掩星探测技术可以获得全球大气折射率、气压、密度、温度和水汽压等气象参数,该技术基本原理是基于几何光学近似的Abel积分反演.地球扁率、电离层传播时间延迟、大气大尺度水平梯度、多路径传播现象等因素在某些高度范围影响大气反演的精度.本文采用模拟的方法,分析其中地球扁率及电离层对反演结果的影响,并讨论局部圆弧修正及电离层修正的效果.利用CHAMP掩星实测轨道数据和有关电离层和大气经验模式、采用三维射线追踪方法模拟计算几种情形下的GPS掩星观测附加相位数据,对模拟数据进行反演,将反演气象参量剖面与模拟时给定模式剖面进行比较,得到了0～60 km高度范围内的反演误差.误差统计分析结果表明,局部圆弧中心的修正以及电离层修正,对于高精度的GPS掩星反演是非常重要的;电离层修正残差仍是制约30～60 km高度范围内反演精度的重要因素,进一步完善和优化大气掩星反演需要发展新的电离层修正算法.     

Explicit integration of a porosity‐dependent hydro‐mechanical model for unsaturated soils

An adaptive substepping explicit integration scheme is developed for a porosity‐dependent hydro‐mechanical model for unsaturated soils. The model is referred to as the modified σ –Θ model in this paper, which features the employment of the subloading surface plasticity and the stress–saturation approach. On numerical aspects, convex/nonconvex subloading surfaces in the σ –Θ space may result in incorrect loading–unloading decisions during the integration. A new loading–unloading decision method is developed here to solve the problem and then embedded into the explicit integration scheme for the modified σ –Θ model. In addition, to enhance the accuracy of the explicit integration, local errors from both hydraulic and mechanical components are included in the error control for each substep. A drift correction method is also developed to ensure the state point lies on the subloading surface in the σ –Θ space within a set error level. The performance of the loading–unloading decision method for the modified σ –Θ model is discussed through comparing it with the conventional loading–unloading decision method. The importance of involving the hydraulic component in the error control is also demonstrated. The accuracy and efficiency of the proposed adaptive substepping explicit integration scheme for the modified p–Θ model are also studied via several numerical examples. Copyright © 2016 John Wiley & Sons, Ltd.     

Spatial modelling of reference evapotranspiration using adjusted Blaney-Criddle equation in an arid environment

Abstract

The Blaney-Criddle (BC) temperature-based equation is used in areas where the complete weather data to estimate reference evapotranspiration (ET₀) by the Penman-Monteith FAO-56 (PMF-56) standard model is complex. In this study, the BC equation was first tested and calibrated against the ET₀ values computed by the PMF-56 method using data from 17 weather stations in arid regions of Iran. Then, geographical information systems (GIS)-based spatially-distributed maps of ET₀ were prepared by means of geographic/topographic factors derived from a digital elevation model (DEM) for all months, separately. The results indicate that the original BC equation overestimated PMF-56 ET₀ by 4% at the study sites. The BC equation produced closer ET₀ estimates to the PMF-56 method after it was calibrated. The error rate of <3% for the spatial modelling approach suggests that the developed ET₀ maps are reliable.

Editor D. Koutsoyiannis; Associate editor D. Yang

Citation Tabari, H., Hosseinzadeh Talaee, P., and Shifteh Some'e, B., 2013. Spatial modelling of reference evapotranspiration using adjusted Blaney-Criddle equation in an arid environment. Hydrological Sciences Journal, 58 (2), 408–420.     

标准系列制备的一种简单方法

一些新的稀释装置已用于原子发射光谱法和原子吸收分光光度法中,改变了以往预先配制浓度依次变化的标准系列的习惯做法。Ko(?)cielniak提出的一种非连续稀释方法,所配制溶液的浓度与稀释次数成指数关系。本文采用了这种技术对稀释装置作了改进,只需要一个小锥形瓶,添加或稀释同一个原始溶液便可制备出一系列标准溶液。设备简单、操作方便,用于原子吸收分光光度法测定钾长石中的钠、钾并与常规法对照结果满意。     

裂变径迹定年标准化的研究

用钴活化箔对SRM962标准铀玻璃进行了刻度,并比较了用钴活化范和用经过刻度的标准铀玻璃测量中子注量的定年方法,结果表明后者的定年结果优于前者,两者都有正系统偏差。利用磷灰石、结石和榍石的7种年龄标准样品和SRM962标准铀玻璃进行多次刻度,发现3种年龄标准矿物的Zeta常数基本一致,为327.4±7.8(±2σ).