低空大比例尺地形图航测生产关键技术

针对传统航空摄影测量生产工艺在生产过程中遇到的影响大比例尺测图精度的问题,该文探讨了低空航测生产大比例尺地形图的关键技术。通过选用宽角相机、低航高飞行、强化影像匹配、野外布设标志控制点、优选平差模型、精化测图操作等改进方式,以提高大比例尺航测精度;组建无人飞艇低空航测系统,对提出的技术方法予以实现;最后给出了山西境内近30个县市建成区1∶500测绘生产实践的部分验证成果。     

Effect of sensor modelling methods on computation of 3-D coordinates from Cartosat-1 stereo data

The orbital and the rational polynomial coefficients (RPC) models are the two most commonly used models to compute a three-dimensional coordinates from an image stereo-pair. But it is still confusing that with the identical user provided inputs, which one of these two models provides more accurate digital elevation model (DEM), especially for mountainous terrain. This study aimed to find out the answer by evaluating the impact of used models on the vertical accuracy of DEM extracted from Cartosat-1 stereo data. We used high-accuracy photogrammetric DEM as the reference DEM. Apart from general variations in statistics, surprisingly in a few instances, both the DEMs provided contrasting results, thus proving the significance of this study. The computed root mean square errors and linear error at 90% (LE90) were lower in case of RPC DEM for various classes of slope, aspect and land cover, thus suggesting its better relative accuracy.     

考虑地球曲率影响的重力中间层校正计算及其精度分析

介绍一种考虑地球曲率影响的“球冠模型” 重力中间层校正算法,并通过不同算例对比该算法与以往“圆柱体模型”算法之间的差值。结果表明,其差值的数量级最大可达0.4 mGal。     

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.     

基于面向对象分类的稀土开采区遥感信息提取方法研究

离子吸附型稀土矿是我国宝贵的矿产资源,运用遥感影像分类技术提取稀土开采区可以准确地实现对稀土开采状况的监测,但仅利用光谱信息往往难以保证分类精度。本文以江西寻乌稀土矿区为研究区,以IKONOS影像为数据源,应用面向对象分类方法提取了稀土开采区的遥感信息。针对稀土开采区的分布特点,选择基于边缘的分割算法进行影像分割;结合地形信息、光谱信息及几何信息建立规则集,进行特征提取;最后采用隶属度函数法实现面向对象分类,并与传统的光谱角填图分类进行对比分析。研究结果表明,面向对象分类法提取稀土开采区的总体精度为92.49%,Kappa系数为0.857 6,与传统监督分类方法相比有了很大的提高。     

A comparative analysis of the NDVIg and NDVI3g in monitoring vegetation phenology changes in the Northern Hemisphere

Phenology is a sensitive and critical feature of vegetation and is a good indicator for climate change studies. The global inventory modelling and mapping studies (GIMMS) normalized difference vegetation index (NDVI) has been the most widely used data source for monitoring of the vegetation dynamics over large geographical areas in the past two decades. With the release of the third version of the NDVI (GIMMS NDVI3g) recently, it is important to compare the NDVI3g data with those of the previous version (NDVIg) to link existing studies with future applications of the NDVI3g in monitoring vegetation phenology. In this study, the three most popular satellite start of vegetation growing season (SOS) extraction methods were used, and the differences between SOSg and SOS3g arising from the methods were explored. The amplitude and the peak values of the NDVI3g are higher than those of the NDVIg curve, which indicated that the SOS derived from the NDVIg (SOSg) was significantly later than that derived from the NDVI3g (SOS3g) based on all the methods, for the whole northern hemisphere. In addition, SOSg and SOS3g both showed an advancing trend during 1982–2006, but that trend was more significant with SOSg than with SOS3g in the results from all three methods. In summary, the difference between SOSg and SOS3g (in the multi-year mean SOS, SOS change slope and the turning point in the time series) varied among the methods and was partly related to latitude. For the multi-year mean SOS, the difference increased with latitude intervals in the low latitudes (0–30°N) and decreased in the mid- and high-latitude intervals. The GIMMS NDVI3g data-sets seemed more sensitive than the GIMMS NDVIg in detecting information about the ground, and the SOS3g data were better correlated both with the in situ observations and the SOS derived from the Moderate Resolution Imaging Spectroradiometer NDVI. For the northern hemisphere, previous satellite measures (SOS derived from GIMMS NDVIg) may have overestimated the advancing trend of the SOS by an average of 0.032 d yr^–1.     

Object- and pixel-based classifications of macroalgae farming area with high spatial resolution imagery

Macroalgae plays an important role in coastal ecosystems. The accurate delineation of macroalgae areas is important for environmental management. This study compared the pixel- and object-based methods using Gaofen satellite no. 2 image to explore an efficient classification approach. Expert system rules and nearest neighbour classifier were adopted for object-based classification, whereas maximum likelihood classifier was implemented in the pixel-based approach. Normalized difference vegetation index, normalized difference water index, mean value of the blue band and geometric characteristics were selected as features to distinguish macroalgae farms by considering the spectral and spatial characteristics. Results show that the object-based method achieved a higher overall accuracy and kappa coefficient than the pixel-based method. Moreover, the object-based approach displayed superiority in identifying Porphyra class. These findings suggest that the object-based method can delineate macroalgae farming areas efficiently and be applied in the future to monitor the macroalgae farms with high spatial resolution imagery.     

夏季亚洲阻塞高压识别及其对中国东北气候异常的可能影响:不同再分析资料对比

基于阻塞高压（阻高）客观识别方法,利用1979-2016年夏季（6-8月）NCEP-Ⅰ、NCEP-Ⅱ逐日再分析资料和ERA-interim逐6 h再分析资料对识别结果进行对比分析;并以D类（130°-160°E）阻高为例,讨论其对6月中国东北地区气候的可能影响。结果表明:NCEP-Ⅰ和NCEP-Ⅱ再分析资料对阻高活动天数、发生频次及年代际变化的识别结果差异较小,而ERA-interim与前两种资料的结果差别较大。3种再分析资料下,夏季各类阻高活动天数均与500 hPa高度场存在相应的显著相关区,且形态相近。但前两种资料对于各类阻高的表征结果较为一致,而ERA-interim再分析资料对各类阻高面积和范围的表征偏小。6月D类阻高活动日数与东北地区气温和降水关系密切,D类阻高活跃年,大气环流以经向型为主,东北地区低层低温、暖平流,高层高温、冷平流的结构指示大气层结不稳定,且东北上空为异常低压环流控制,上升气流较强,有利于6月东北地区出现低温多雨天气。鄂霍次克海地区是6月罗斯贝波的重要来源地之一,而6月D类阻高的形成可能与海-陆温差有关。      

降水现象仪观测应用评估

利用2017年9月至2018年8月北京20个站降水现象仪采集数据与人工平行观测数据,对降水现象仪进行了对比评估。结果表明:降水现象仪的缺测率为0.01%,空报率为0.6%,捕获率为93.5%,漏报率为27.9%,错报率为10.0%。从统计结果可知,降水现象仪的缺测率、空报率较低,捕获率较高,体现出设备性能良好的一面,漏报率和错报率偏高,表明设备漏识别和错误识别的情况较多,漏报主要发生在弱降水过程中,错报主要出现在毛毛雨的识别上。设备测量和人工观测降水开始时间一致性较好,终止时间一致性偏差;降水现象仪现存问题:在大雨强时易出现雨滴叠加误识别,在小雨强时识别率会降低,在无降水错误输出降水现象方面缺少质控。     

北京市GPS网解算时IGS站的选取实验

用实验的方法,讨论了北京市GPS台网在用GAMIT软件解算时,选取IGS基准站的空间分布(南北半球、网内网缘、均匀展布)、数量分布(0到8个IGS站)对解算结果精度的影响。由于受观测站数量和IGS站观测数据质量的影响,在保证精度的前提下,为了提高观测数据的利用率,需要增加IGS站数量。根据2004全年的解算结果,北京台网选择9到10个IGS站较为合适。