Primary productivity in the western tropical Pacific and equatorial warm waters

ＩＮＴＲＯＤＵＣＴＩＯＮＢｙｓｔｕｄｙｉｎｇｃｈｌｏｒｏｐｈｙｌｌａｎｄｐｒｉｍａｒｙｐｒｏｄｕｃｔｉｖｉｔｙｉｎｏｃｅａｎ ,ｅｉｔｈｅｒｉｎｔｈｅｂｉｇ ｓｃａｌｅｏｒｉｎｔｈｅｓｍａｌｌｓｃａｌｅ ,ｔｈｅｐｒｏｄｕｃｔｉｖｉｔｙｄｉｓｔｒｉｂｕｔｉｏｎａｎｄｖａｒｉａｔｉｏｎｏｆｍａｒｉｎｅｏｒｇａｎｉｃｍａｔｅｒｉａｌｉｎｔｈｅｔｅｍｐｏ ｒａｌａｎｄｓｐａｔｉａｌｃａｎｂｅｕｎｄｅｒｓｔｏｏｄ .Ｔｈｅｓｅａａｒｅａｓ ,ｓｉｔｕａｔｉｎｇｉｎｔｈｅｗｅｓｔｅｒｎｔｒｏｐｉｃａｌＰａｃｉｆｉｃ…     

渭河下游河道调整过程中的复杂响应现象

应用系统复杂响应的原理研究三门峡水库上游渭河河道调整过程,表明上游河道河床形态对基面上升所作出的响应是复杂的,弯曲系数的变化为先减小而后增大,宽深比的变化是先增大后减小,比降由先减小而后增大,最后均趋于稳定.     

基于强跟踪性能的QEKF组合导航自适应滤波研究

以低成本陆用航姿参考系统（AHRS）/GPS紧耦合系统为研究对象,建立了基于伪距、伪距率、航向角的组合观测数学模型。引入强跟踪滤波（STF）算法,利用渐消因子的作用,增强滤波器对状态快速变化的跟踪能力。同时,针对微惯性器件漂移过大的缺点,采用二阶EKF（QEKF）方法,通过对Hessian矩阵的求解,补偿系统观测方程线性化的二阶截断误差。仿真表明：STQEKF方法可高速准确地逼近系统非线性模型,实现陆地载体导航控制,在传感器精度有限的情况下,使姿态和位置的控制效果较标准EKF分别提高了约8.9%-38.2%和48.7%-54.4%     

GPS单频精密单点定位方法与实践

讨论了单频精密单点定位的解算方法与思路,编写了单频精密动态单点定位的程序,实现了事后动态单频精密单点定位.     

基于动态检测平台的GPS接收机动态性能检测研究

介绍了一种新型动态检测平台,设计了GPS动态差分试验和双动态差分试验,分析了GPS动态单点定位、动态差分测量、双动态差分测量在两种不同速度条件下进行了的试验数据.     

富宁洞哈钛铁矿

印支期暗色、致密块状辉绿岩中含较高的含铁矿物,地磁异常较高,为矿源层。辉绿岩与灰岩接触形成矽卡岩带为有利的含矿带。矿体沿大断裂或次级断层形成的通道侵入穹窿状构造中,于二叠系砂岩、板岩隔层的下部形成工业钛铁矿体。     

四川德格错阿金矿特征与矿床成因初析

错阿金矿床赋存于理塘义敦群上三叠统瓦能组变基性火山岩中,金矿体受次级北北西-近南北向韧性-脆韧性剪切变质带控制,与金矿化有关蚀变主要为黄铁矿化、辉锑矿化和硅化、碳酸盐化、金云母化及石墨化。矿床成因为蚀变构造型。甘孜-理塘断裂带北段嗄拉、错阿、海子口三个矿化集中区内大部份化探异常具有面积大、强度高、梯度变化大、元素组合好等特点,具有很好的找矿前景。     

U-Pb Age Determination for Seven Standard Zircons using Inductively Coupled Plasma–Mass Spectrometry Coupled with Frequency Quintupled Nd-YAG (λ = 213 nm) Laser Ablation System: Comparison with LA-ICP-MS Zircon Analyses with a NIST Glass Reference Material

This paper evaluates the analytical precision, accuracy and long‐term reliability of the U‐Pb age data obtained using inductively coupled plasma–mass spectrometry (ICP‐MS) with a frequency quintupled Nd‐YAG (λ = 213nm) laser ablation system. The U‐Pb age data for seven standard zircons of various ages, from 28 Ma to 2400 Ma (FCT, SL13, 91500, AS3, FC1, QGNG and PMA7) were obtained with an ablation pit size of 30 μm diameter. For ²⁰⁷Pb/²⁰⁶Pb ratio measurement, the mean isotopic ratio obtained on National Institute of Standards and Technology (NIST) SRM610 over 4 months was 0.9105 ± 0.0014 (n = 280, 95% confidence), which agrees well with the published value of 0.9096. The time‐profile of Pb/U ratios during single spot ablation showed no significant difference in shape from NIST SRM610 and 91500 zircon standards. These results encouraged the use of the glass standard as a calibration standard for the Pb/U ratio determination for zircons with shorter wavelength (λ = 213 nm) laser ablation. But ²⁰⁶Pb/²³⁸U and ²⁰⁷Pb/²³⁵U ages obtained by this method for seven zircon standards are systematically younger than the published U‐Pb ages obtained by both isotope dilution–thermal ionization mass spectrometry (ID‐TIMS) and sensitive high‐resolution ion‐microprobe (SHRIMP). Greater discrepancies (3–4% younger ages) were found for the ²⁰⁶Pb/²³⁸U ages for SL13, AS3 and 91500 zircons. The origin of the differences could be heterogeneity in Pb/U ratio on SRM610 between the different disks, but a matrix effect accuracy either in the ICP ion source or in the ablation‐transport processes of the sample aerosols cannot be neglected. When the ²⁰⁶Pb/²³⁸U (= 0.2302) newly defined in the present study is used, the measured ²⁰⁶Pb/²³⁸U and ²⁰⁷Pb/²³⁵U ages for the seven zircon standards are in good agreement with those from ID‐TIMS and SHRIMP within ±2%. This suggests that SRM610 glass standard is suitable for ICP‐MS with laser ablation sampling (LA‐ICP‐MS) zircon analysis, but it is necessary to determine the correction factor for ²⁰⁶Pb/²³⁸U by measuring several zircon standards in individual laboratories.     

倒Y形竖井联系测量

介绍在小直径竖井联系测量中取消联系三角形,改用单根钢丝定点,全站仪引测高程的施测方法。     

Hybrid seismic modeling based on discrete-wave number and finite-difference methods

Any calculation of seismic wave propagation comprising the seismic source, the travel path, and the receiver site in a single finite-difference (FD) model requires a considerable amount of computer time and memory. Moreover, the methods currently available for including point sources in the 2D FD calculations are far-field approximations only. Therefore we have developed a new hybrid method for treating the seismic wave fields at localized 2D near-surface structures embedded in a 1D background medium, and excited by a point source. The source radiation and propagation in the background model is solved by the discrete-wave number (DW) method, while the propagation in the local 2D structure is calculated by the FD method. The coupling between the two sets of calculations is performed on a rectangular excitation box surrounding the local structure. We show the usefulness of the method in ground-motion studies where both near-field source effects and local site effects are important. Technical problems connected with the inconsistency between the 3D source radiation and the 2D FD calculation are minor for the relatively distant in-plane point explosive sources, but are more serious for the in-plane dislocation sources.