大汶河流域洪灾的成因及防治对策

阐述了大汶河流域洪涝灾害的特点,并对洪涝灾害发生的原因进行了分析,提出了预防为主、综合治理、系统防治和重点防治相结合、标本兼治的防治思路及具体防治对策.     

莺歌海盆地成因及其大地构造意义

莺歌海盆地位于南海西北部 ,属 NW走向红河断裂带向南海海域的延伸。本文通过对盆地结构、沉降特征和构造 -沉积迁移过程的研究 ,提出莺歌海盆地在始新世—早渐新世期间属左旋扭张性断陷盆地 ,晚渐新世—早中新世的盆地演化阶段受到红河断裂带的左行剪切运动影响。莺歌海盆地的形成和演化历史反映了印藏板块碰撞过程对南海形成演化的影响历史     

鄂尔多斯盆地奥陶系海相碳酸盐岩生烃性能与中部长庆气田气源成因研究

用激光 -荧光显微镜等有机岩石学方法 ,挑选样品中有明显生、排烃现象的碳酸盐岩 ,再以测定的这类碳酸盐岩的有机碳含量为依据 ,确定本区高成熟碳酸盐气源岩残余有机碳的下限指标用 0 .13%～ 0 .14 %比较合理。根据碳酸盐岩储层孔隙中充填沥青和皮膜状残余沥青的分布和含量 ,论证了陕参 1井等奥陶系碳酸盐岩地层在地质历史中 ,存在若干油气有效储层。采用连续升温 ,步进取样的热模拟实验方法 ,揭示了本区煤与碳酸盐岩干酪根随热演化作用增强 ,烃类气体产物的干燥系数增大 ,δ1 3C1 、δ1 3C2 明显变重的规律 ,并根据样品实验结果推算 ,本区石炭系—二叠系煤最大生气阶段的δ1 3C1 应为 - 2 7‰～ - 2 8‰ ,碳酸盐岩最大生气阶段的δ1 3C1 应为- 31.7‰～ - 33‰。在气源成因判识中 ,根据主生气期阶段对天然气成藏储聚的贡献最大、甲烷碳同位素较重以及长庆气田风化壳气藏天然气δ1 3C1 重值区并不与石炭系—二叠系煤的镜质组反射率高值区匹配的现象等进行气源判识 ,认为长庆奥陶系风化壳气藏 ,具有下古生界海相碳酸盐岩气与上古生界石炭系—二叠系煤成气的混源成因     

Seismotectonic environment of occurring the February 3, 1996 Lijiang M=7.0 earthquake, Yunnan Province

Lijiang-Daju fault, the seismogenic fault of the 1996 Lijiang M=7.0 earthquake, can be divided into Lijiang-Yuhu segment in the south and Yuhu-Daju segment in the north. The two segments show clear difference in geological tectonics, but have the similar dynamic features. Both normal dip-slip and sinistral strike-slip coexist on the fault plane. This kind of movement started at the beginning of the Quaternary (2.4～2.5 Ma B.P.). As to the tectonic types, the detachment fault with low angle was developed in the Early Pleistocene and the normal fault with high angle only after the Mid-Pleistocene (0.8 Ma B.P.). Based on the horizontal displacements of gullies and the vertical variance of planation surfaces cross the Lijiang-Daju fault at east piedmont of Yulong-Haba range, the average horizontal and vertical slip rates are calculated. They are 0.84 mm/a and 0.70 mm/a since the Quaternary and 1.56 mm/a and 1.69 mm/a since the Mid-Pleistocene. The movements of the nearly N-S-trending Lijiang-Daju fault are controlled not only by the regional stress field, but also by the variant movement between the Yulong-Haba range and Lijiang basin. The two kinds of dynamic processes form the characteristics of seismotectonic environment of occurring the 1996 Lijiang earthquake.     

Mesozoic basin evolution and tectonic mechanism in Yanshan, China

The Mesozoic basins in Yanshan, China underwent several important tectonic transformations, including changes from a pre-Late Triassic marginal cratonic basin to a Late Triassic-Late Jurassic flexural basin and then to a late Late Jurassic-Early Cretaceous rift basin. In response to two violent intraplate deformation at Late Triassic and Late Jurassic, coarse fluvial depositional systems in Xingshikou and Tuchengzi Formations were deposited in front of thrust belts. Controlled by transform and extension faulting, fan deltas and lacustrine systems were deposited in Early Cretaceous basins. The composition of clastic debris in Late Triassic and Late Jurassic flexural basins respectively represents unroofing processes from Proterozoic to Archean and from early deposited, overlying pyroclastic rocks to basement rocks in provenance areas. Restored protobasins were gradually migrated toward nearly NEE to EW-trending from Early Jurassic to early Late Jurassic. The Early Cretaceous basins with a NNE-trending crossed over early-formed basins. The Early-Late Jurassic and Early Cretaceous basins were respectively controlled by different tectonic mechanisms.     

Magmatic effects of the lunar late heavy bombardment

Large volumes of mare basalts are present on the surface of the moon, located preferentially in large impact basins. Mechanisms relating impact basins and mare basalt eruptions have previously been suggested: lunar impacts removed low-density material that may have inhibited eruption, and created cracks for fluid flow [Icarus 139 (1999) 246], and lunar basins have long been described as catchments for magma (e.g., [Rev. Geophys. Space Phys. 18 (1980) 107] and references therein). We present a new model for melt creation under near side lunar basins that is triggered by the impacts themselves. Magma can be produced in two stages. First, crater excavation depressurizes underlying material such that it may melt in-situ. Second, the cratered lithosphere rises isostatically, warping isotherms at the lithosphere-asthenosphere boundary which may initiate convection, in which adiabatic melting can occur. The first stage produces by far the largest volume of melt, but convective melting can continue for up to 350 Ma. We propose that giant impacts account for a large portion of the volume and longevity of mare basalt volcanism, as well as for several compositional groups, including high alumina, high titanium, KREEP-rich, and picritic magmas.     

A hybrid method for size characterization of coarse subsurface fluvial sediments

This paper introduces and evaluates a novel method for ascertaining the grain‐size distribution of subsurface sediments that involves profoundly less sampling effort than standard methods. It is based on hybrid sampling principles previously applied to the construction of synthetic surface grain‐size distributions. The method is developed from an empirical demonstration of the approximate similarity of surface and subsurface grain‐size distributions when compared over a common range of sizes. Subsurface hybrid models are found to provide good facsimiles of grain‐size distributions de?ned using standard criteria and to yield distribution percentiles with millimetre accuracy. The technique is presented as an expedient alternative to standard methods for large, perennial gravel‐bed rivers. As this is a new technique, prudent application is advised in lieu of further investigation. Copyright © 2004 John Wiley & Sons, Ltd.     

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.     

Geochemistry of the subduction-related magmatic rocks in the Dahong Mountains, northern Hubei Province——Constraint on the existence and subduction of the eastern Mianle oceanic basin

Being a composite collisional orogen between North China and South China blocks, the Qinling orogenic belt is the key to understand the composite combination, prolonged evolutionary history and their continental dynamics. The main suture between north and south Qinling, called Shangdan suture zone (SDSZ), had been studied in detail for about twenty years. Recently, another suture zone, called Mianl黣 suture zone (MLSZ), has been identified in the Qinling Mountains. It is characterized b…