Late Quaternary kinematics of the Pallatanga strike-slip fault (Central Ecuador) from topographic measurements of displaced morphological features

The northeast-trending Pallatanga right-lateral strike-slip fault runs across the Western Cordillera connecting N50E-N70E trending normal faults in the Gulf of Guayaquil with N-S reverse faults in the Interandean Depression. Over most of its length, the fault trace has been partly obscured by erosional processes and can be inferred in the topography only at the large scale. Only the northern fault segment, which follows the upper Rio Pangor valley at elevations above 3600 m, is prominent in the morphology. Valleys and ridges cut and offset by the fault provide an outstanding record of right-lateral cumulative fault displacement. The fault geometry and kinematics of this particular fault segment can be determined from detailed topographic levellings. The fault strikes N30E and dips 75 to the NW. Depending on their size and nature, transverse morphological features such as tributaries of the Rio Pangor and intervening ridges, reveal right-lateral offsets which cluster around 27 ± 11m, 41.5 ± 4 m, 590 ± 65 m and 960 ± 70 m. The slip vector deduced from the short-term offsets shows a slight reverse component with a pitch of about 11.5 SW. The 41.5 ± 4 m displacements are assumed to be coeval with the last glacial termination, yielding a mean Holocene slip-rate of 2.9- 4.6 mm yr⁻¹. Assuming a uniform slip rate on the fault in the long term, the 27 m offset appears to correlate with an identified middle Holocene morphoclimatic event, and the long term offsets of 590 m and 960 m coincide with the glacial terminations at the beginning of the last two interglacial periods.     

EFFECTS OF THE ENVELOPE DEGREE OF OROGRAPHY ON THE SIMULATED CLIMATE PROPERTIES

A primitive equation model with a zonal domain and a p-σ incorporated vertical coordinate systemis used to study the effects of the envelope degree of orography on the simulated properties of bothwinter and summer climates.Results show that the orography with a larger envelope degree can im-prove the simulations to certain extent,especially in winter.It is found that the simulated propertiesof climate are mainly determined by the co-effects of the land-sea and the orographic distributions,and the envelope degree of orography has a secondary effect.However it should be taken properly inorder to improve simulations:otherwise,it would be harmful.Different envelope degrees of orogra-phy can be adopted in different areas.     

EFFECTS OF TOPOGRAPHY ON PROPAGATION AND DEVELOPMENT OF INERTIA GRAVITY WAVE

Effects of topography on the propagation and development of inertia gravity waves areinvestigated by means of WKBJ method.The equation of wave action conservation is obtained.It isfound that the inertia gravity wave tends to propagate to the higher elevation area,meanwhile theamplitudes of the waves increase.While the inertia gravity waves propagate to a lower elevation area,their amplitudes decrease.     

Unified Approach to Photon-Counting Microlaser Rangers, Transponders, and Altimeters

Unlike current manned systems, NASA's next generation SLR2000 Satellite Laser Ranging (SLR) station is fully autonomous, eye-safe, relatively compact and inexpensive, and, during daytime tracking, operates at signal-to-noise ratios several orders of magnitude below unity. Tiny, passivelyQ-switched microlasers generate ultra-short pulses with output energies on the order of 100 J at few kHz rates to achieve mm-levelranging precision to satellite altitudesof 20,000 km. Special ranging receivers, combined with Poisson statistical analysis of the received photon distribution, enable the system to rapidly and reliably identify and extract the single photon laser echoes from the solar background. The enhanced rate of return, combined with a uniform signal strength, can actually drive down both systematic and random range errors. The new SLR2000 technology has already spawned exciting new applications. Compact microlaser altimeters, capable of mapping the surface of a planet or other celestial body at multikilohertz rates, is one such application, and a high altitude, airborne version is currently being developed under NASA's Instrument Incubator Program. Interplanetary microlaser transponders would be capable of performing decimeter ranging or subnanosecond time transfer to spacecraft throughout the inner Solar System, resulting in improved knowledge of planetary motions and librations and enhanced General Relativity experiments.     

Long‐term landscape evolution: linking tectonics and surface processes

Research in landscape evolution over millions to tens of millions of years slowed considerably in the mid‐20th century, when Davisian and other approaches to geomorphology were replaced by functional, morphometric and ultimately process‐based approaches. Hack's scheme of dynamic equilibrium in landscape evolution was perhaps the major theoretical contribution to long‐term landscape evolution between the 1950s and about 1990, but it essentially ‘looked back’ to Davis for its springboard to a viewpoint contrary to that of Davis, as did less widely known schemes, such as Crickmay's hypothesis of unequal activity. Since about 1990, the field of long‐term landscape evolution has blossomed again, stimulated by the plate tectonics revolution and its re‐forging of the link between tectonics and topography, and by the development of numerical models that explore the links between tectonic processes and surface processes. This numerical modelling of landscape evolution has been built around formulation of bedrock river processes and slope processes, and has mostly focused on high‐elevation passive continental margins and convergent zones; these models now routinely include flexural and denudational isostasy. Major breakthroughs in analytical and geochronological techniques have been of profound relevance to all of the above. Low‐temperature thermochronology, and in particular apatite fission track analysis and (U–Th)/He analysis in apatite, have enabled rates of rock uplift and denudational exhumation from relatively shallow crustal depths (up to about 4 km) to be determined directly from, in effect, rock hand specimens. In a few situations, (U–Th)/He analysis has been used to determine the antiquity of major, long‐wavelength topography. Cosmogenic isotope analysis has enabled the determination of the ‘ages’ of bedrock and sedimentary surfaces, and/or the rates of denudation of these surfaces. These latter advances represent in some ways a ‘holy grail’ in geomorphology in that they enable determination of ‘dates and rates’ of geomorphological processes directly from rock surfaces. The increasing availability of analytical techniques such as cosmogenic isotope analysis should mean that much larger data sets become possible and lead to more sophisticated analyses, such as probability density functions (PDFs) of cosmogenic ages and even of cosmogenic isotope concentrations (CICs). PDFs of isotope concentrations must be a function of catchment area geomorphology (including tectonics) and it is at least theoretically possible to infer aspects of source area geomorphology and geomorphological processes from PDFs of CICs in sediments (‘detrital CICs’). Thus it may be possible to use PDFs of detrital CICs in basin sediments as a tool to infer aspects of the sediments' source area geomorphology and tectonics, complementing the standard sedimentological textural and compositional approaches to such issues. One of the most stimulating of recent conceptual advances has followed the considerations of the relationships between tectonics, climate and surface processes and especially the recognition of the importance of denudational isostasy in driving rock uplift (i.e. in driving tectonics and crustal processes). Attention has been focused very directly on surface processes and on the ways in which they may ‘drive’ rock uplift and thus even influence sub‐surface crustal conditions, such as pressure and temperature. Consequently, the broader geoscience communities are looking to geomorphologists to provide more detailed information on rates and processes of bedrock channel incision, as well as on catchment responses to such bedrock channel processes. More sophisticated numerical models of processes in bedrock channels and on their flanking hillslopes are required. In current numerical models of long‐term evolution of hillslopes and interfluves, for example, the simple dependency on slope of both the fluvial and hillslope components of these models means that a Davisian‐type of landscape evolution characterized by slope lowering is inevitably ‘confirmed’ by the models. In numerical modelling, the next advances will require better parameterized algorithms for hillslope processes, and more sophisticated formulations of bedrock channel incision processes, incorporating, for example, the effects of sediment shielding of the bed. Such increasing sophistication must be matched by careful assessment and testing of model outputs using pre‐established criteria and tests. Confirmation by these more sophisticated Davisian‐type numerical models of slope lowering under conditions of tectonic stability (no active rock uplift), and of constant slope angle and steady‐state landscape under conditions of ongoing rock uplift, will indicate that the Davis and Hack models are not mutually exclusive. A Hack‐type model (or a variant of it, incorporating slope adjustment to rock strength rather than to regolith strength) will apply to active settings where there is sufficient stream power and/or sediment flux for channels to incise at the rate of rock uplift. Post‐orogenic settings of decreased (or zero) active rock uplift would be characterized by a Davisian scheme of declining slope angles and non‐steady‐state (or transient) landscapes. Such post‐orogenic landscapes deserve much more attention than they have received of late, not least because the intriguing questions they pose about the preservation of ancient landscapes were hinted at in passing in the 1960s and have recently re‐surfaced. As we begin to ask again some of the grand questions that lay at the heart of geomorphology in its earliest days, large‐scale geomorphology is on the threshold of another ‘golden’ era to match that of the first half of the 20th century, when cyclical approaches underpinned virtually all geomorphological work. Copyright © 2007 John Wiley & Sons, Ltd.     

Analytical models of contaminant transport in coastal aquifers

The Henry formulation, which couples subsurface flow and salt transport via a variable-density flow formulation, can be used to evaluate the extent of sea water intrusion into coastal aquifers. The coupling gives rise to nontrivial flow patterns that are very different from those observed in inland aquifers. We investigate the influence of these flow patterns on the transport of conservative contaminants in a coastal aquifer. The flow is characterized by two dimensionless parameters: the Péclet number, which compares the relative effects of advective and dispersive transport mechanisms, and a coupling parameter, which describes the importance of the salt water boundary on the flow. We focus our attention on two regimes – low and intermediate Péclet number flows. Two transport scenarios are solved analytically by means of a perturbation analysis. The first, a natural attenuation scenario, describes the flushing of a contaminant from a coastal aquifer by clean fresh water, while the second, a contaminant spill scenario, considers an isolated point source.     

动态模拟扫描成像转台转速系统变阻尼控制与PID控制的对比研究

在设计高精度速率转台系统时，对PID控制与变阻尼控制作了对比研究，采用变阻尼控制方案较好地解决了系统快速性的矛盾，并且给出的仿真结果实验是令人满意的。     

Scattering of seismic waves by cracks in multi-layered geological regions: II. Numerical results

The mechanical model for plane strain, time-harmonic seismic wave propagation problems in cracked, multi-layered geological regions with surface topography and non-parallel interfaces was described in the first part of this work. Here, this model is used to investigate the response of such a region to the presence of traveling elastic waves generated by a seismic source. The computational methodology that was developed in the first part is based on a combination of both the regular (displacement-based) and the hypersingular (traction-based) Boundary Integral Equation Method (BIEM). First, the accuracy and convergence characteristics of this hybrid BIEM are studied. Then, a series of problems involving four different configurations of a reference geological deposit with both interface and internal cracks are solved, for a loading that is due to a seismically-induced pressure wave propagating upwards from the underlying rigid half-plane. The purpose of the numerical study is to investigate the influence of various key parameters of the problem, such as frequency and incidence angle of the incoming wave, size of the surface relief, location and size of the buried cracks, interaction effects between cracks and finally the presence of layers, on both the scattered displacement field and the stress concentration field.     

The effect of local irregular topography on seismic ground motion

Ｔｈｅｅｆｆｅｃｔｏｆｌｏｃａｌｉｒｒｅｇｕｌａｒｔｏｐｏｇｒａｐｈｙｏｎｓｅｉｓｍｉｃ　ｇｒｏｕｎｄ　ｍｏｔｉｏｎＪＩＧ－ｈｏＬＩＵ（刘晶波）（ＤｅｐａｒｔｍｅｎｔｏｆＣｉｖｉｌＥｎｇｉｎｅｅｒｉｎｇ，ＴｓｉｎｇｈｕａＵｎｉｖｅｒｓｉｔｙＢｅｉｊｉ...     

埋藏基岩地形对地震波动影响的模拟研究

本文以超声地震模型试验为基础,着重从地震波的强度方面来阐明埋藏基岩地形对地震波动的影响,提出了利用振动能量分析地震动问题的重要性,理论分析及实验结果表明,埋藏基岩地形对地震波动的影响表现为:一方面基岩面凹凸不平,致使基岩面上不同部位接收能量大小不同;另一方面,基岩的凹凸面对地震波产生汇聚与发散作用,这两方面共同作用的结果使得地表不同地点表现出不同的地震动强度。