天津市郊大气边界层湍谱特征分析

用１９９０年７月在天津市郊的观测资料，计算了风速谱、温度谱及动量和热量通量的协谱。结果表明，市郊下垫面上的大气湍流谱特征与平坦地形上得到的典型结果基本一致，但满足各向同性的湍流尺度似乎比在平坦地形上的略大，谱的峰值频率区域略窄，谱的低频区（含能区）特征与平坦地形上的情况也不同。     

The granulometrical characteristics of a slowly-moving dust cloud

A torn-up road offered the opportunity to sample a dust cloud continuously at different heights during a time interval of 51 hours. In particular the granulometrical characteristics of the dust caught were investigated. It appears that if the air layer in the vicinity of a dust cloud is not too turbulent, the cloud will be clearly granulometrically stratified. The coarse material moves chiefly at the bottom of the cloud, whereas the fine material will occur both at the bottom and at the top. The experiment also shows that the higher the dust in the cloud, the worse it is sorted. Above a critical height, however, the degree of sorting increases again. The variation of the mean dust diameter d₅₀, as a function of the height z, can be expressed in a simple semi-logarithmic equation. The variation of the dust quantity G, as a function of the height z, can also be expressed in a semi-logarithmic form but the correlation is higher when a power equation is used. The ratio of fine silt to coarse silt seems to vary parabolically with height. One can only speak of an optimal transport height in the case of particles > 16 μm. For finer particles, the turbulence of a normal air stream is usually high enough to carry the particles anywhere in the dust cloud, so that one can no longer speak of an optimal transport height. The granulometrical border between aeolian transport in saltation and aeolian transport in suspension lies, according to the results of the experiment, at a diameter of about 63 μm.     

An erosion criterion for gravel-bed rivers

A theoretically-based erosion criterion is developed for gravel-bed rivers which incorporates the effect of both grain geometry and turbulent velocity fluctuations. It is derived from a balance of instantaneous drag, lift, and gravity forces operating on individual grains and is calculated for spherical grains arranged in three distinct geometries. To accommodate the temporal variation in bed shear stress, the model includes a stochastic element based on the characteristics of turbulence derived from the flume evidence of McQuivey (1973a, b). In terms of the Shields parameter, results show reasonable agreement with the range of observations quoted from the field and with the experimental data of Fenton and Abbott (1977). Finally, the argument is generalized to cover applications in the wider context of field conditions including a range of grain sizes and flow conditions.     

Small scale turbulent diffusion determined with underwater flow visualization

Dye plumes were generated at three depths in the seasonal thermocline between 7 and 11 m, 22 km south of Key West on 21 August 1980 and photographed at about 10 second intervals with an underwater camera system. Eleven pairs of consecutive pictures are analyzed to determine the mean current vertical shear and the width of the plumes by positioning reference points relative to the rod attached to the camera system. The relative distances of reference points are calibrated with the stereophotogrammetric method for one pair. The eddy diffusivity is calculated by use of a model of turbulent diffusion developed byTaylor (1921). Its values range from 5 to 25 cm²s^–1 for the plume widths ranging from 33 to 132 cm. The Richardson number is calculated for each pair of pictures with the vertical density gradient estimated from temperature profiles. Its values are higher than the critical value of 0.25 except for one case. The diffusivity was higher by orders of magnitude than the molecular one and indicates the presence of turbulence together with billow like features of the plumes in spite of high Richardson numbers. This suggests that the billow turbulence might be caused by effects of surface gravity waves and not by the Kelvin-Helmholtz instability.     

Further Studies Of Atmospheric Turbulence In Layers Near The Surface: Scaling The Tke Budget Above The Roughness Sublayer

The second of two experimental studies of the TKE budget conducted on sites of different roughness is described, and results are compared. The first took place within a shallow layer above a small field of mostly bare, cultivated soil; the second was carried out above a roughness sublayer of significant depth on an extensive plain of tall dry grass. Budget terms observed in the second study were scaled with a modified u which compensated for effects of an unusually large stress gradient and ensured that the _m functions would be collinear. By showing that the modification becomes negligible in smaller gradients, it is demonstrated that in normal conditions, budgets observed above significant roughness sublayers should be normalized by scaling in terms of the unreduced Reynolds stress at the sublayer's upper surface. This procedure is shown to be consistent with the expectation that TKE budgets in layers near the surface all scale in fundamentally the same way.Other findings include: (1) the fact that most _m functions previously reported are not quite collinear is attributed to a type of overspeeding known to affect three-cup anemometers; (2) revised _m functions, collinear and largely free of the effects of overspeeding, are determined from a well-established characteristic of the linear _m relation for the stable case; (3) data that define collinear _m functions can also be represented with single hyperbolic curves; (4) dissipation is found to be 10 to 15% too small to balance total TKE production in unstable and neutral conditions and to decrease with increasing z/L in thestable regime; and (5) new relations for based on the observed behaviour of the dissipation deficit provide an improved closure for the set of equations that express the budget terms as functions of _m and z/L.     

Investigation of NaCl deliquescence in porous substrates using RH-XRD

We report on the use of X-ray diffractometry under controlled conditions of temperature and relative humidity (RH-XRD) for the investigation of NaCl deliquescence in the pore space of glass filter frits, which were used as model substrates. The study confirms that RH-XRD is an appropriate experimental technique for the in situ observation of phase transformation in porous materials. It is used for an investigation of both the deliquescence kinetics and the deliquescence humidity within pores of different median pore diameter. Several major influences affecting deliquescence rates in the pore space close to the surface of a porous material are discussed. It appears that quite short-term variation of ambient relative humidity, e.g., typical daily fluctuations, might induce damaging deliquescence–crystallization cycles within the pore space of building materials. In agreement with theoretical considerations it was found that confinement of NaCl crystals in pores with median diameters in the range 1.4–70 μm does not affect the deliquescence humidity of the salt.     

Velocity and turbulence variations at the edge of saltmarshes

Saltmarsh vegetation significantly influences tidal currents and sediment deposition by decelerating the water velocity in the canopy. In order to complement previous field results, detailed profiles of velocity and turbulence were measured in a laboratory flume. Natural Spartina anglica plants were installed in a 3 m length test section in a straight, recirculating flume. Different vegetation densities, water depths and surface velocities were investigated. The logarithmic velocity profile, which existed in front of the vegetation, was altered gradually to a skimming-flow profile, typical for submerged saltmarsh vegetation. The flow reduction in the denser part of the canopy also induced an upward flow (the current was partially deflected by the canopy). The skimming flow was accompanied by a zone of high turbulence co-located with the strongest velocity gradient. This gradient moved upward and the turbulence increased with distance from the edge of the vegetation. Below the skimming flow, the velocity and the turbulence were low. The structure of the flow in the canopy was relatively stable 2 m into the vegetation. The roughness length (z₀) of the vegetation depends only on the vegetation characteristics, and is not sensitive to the current velocity or the water depth. Both the reduced turbulence in the dense canopy and the high turbulence at the top of the canopy should increase sediment deposition. On the other hand, the high turbulence zone just beyond the vegetation edge and the oblique upward flow may produce reduced sedimentation; a phenomenon that was observed near the vegetation edge in the field.     

Analysis And Simulation Of Surface-Layer Winds Using Multiplicative Cascade Models With Self-Similar Probability Densities

Statistical analysis techniques based on multiplicative cascades are investigated for use with surface-layer wind data sets collected in the atmospheric boundary layer over flat farm land. The data were found to exhibit multiscaling statistics, allowing the surface-layer winds to be simulated with the use of multiplicative random cascades. The study found evidence that, for the surface-layer at least, these cascade models (andhence the methods of multifractal analysis) should be applied in separate ways to the microscale inertial range, and the mesoscale. This is at odds with the view found in the existing literature, which proposes a `universal multifractal' model to replace the widely held view that there exists separate microscale, mesoscale and synoptic scales for which the processes governing each are different. At least two separate ranges of scaling are suggested for surface-layer wind data, corresponding to the microscale inertial range and the mesoscale. For the case of the mesoscale range, a self-similar distribution of weighting factors was found for the wind speed data themselves, rather than for an intermediate (dissipation) field, as is required for themicroscale data.     

A SIMPLIFIED APPROACH TO MODELING 3D SEDIMENT-LADEN TURBULENT FLOWS

ＡＳＩＭＰＬＩＦＩＥＤＡＰＰＲＯＡＣＨＴＯＭＯＤＥＬＩＮＧ３ＤＳＥＤＩＭＥＮＴ－ＬＡＤＥＮＴＵＲＢＵＬＥＮＴＦＬＯＷＳＤｏｎｇｈｕｏＺＨＯＵａｎｄＳａｍＳ．Ｙ．ＷＡＮＧＡｂｓｔｒａｃｔ：Ａ３－ｄｎｕｍｅｒｉｃａｌｍｏｄｅｌｆｏｒｓｉｍｕｌａｔｉｎｇｓ...     

新疆北天山地区中强震前单台地震波参数异常特征研究

强地震的孕育过程也是孕震介质的形成过程,在强震前震源附近小地震的地震波运动学,动力学特征的变化过程,则反映了孕震介质的变化过程,为研究地震的孕育,发展和发生的过程,采用单台地震波振幅比,尾波持续时间比,尾波衰减系数这３项地震波参数作为地震学短期前兆指标,分析其震兆特征,从而达到监测孕震介质变化的目的,研究结果表明,单台地震波参数能够有效地发现地震的前兆,但地震波参数的前兆图像复杂多变,不具有统一的