Rotation Center and Horizontal Bearing Capacity of the Bucket Foundation in Soft Ground

In the last 20 years, the bucket foundation has been developed as a new type of offshore platform structure. Because of its short period of application to engineering practices, the theoretical decision on the rotation center and horizontal bearing capacity of the bucket foundation has yet to be agreed. A limit analysis method is used to determine the updated rotation center position and horizontal bearing capacity to evaluate the failure mechanisms of the bucket foundations. The results are compared with numerical simulation and experiments, and also with other theoretical methods. The proposed method can satisfactorily consider the engineering conditions and the result is accurate in determining the rotation center and horizontal bearing capacity.     

Observation on height changes of chinese tide gauges by GPS

IntroductionBecause of global temperature rising and glacierthawing,the sea level has risen about 10-25 cmin the past century[1]. The sea level change isone of the main ai ms in global change monito-ring. Presently the basic tool used in sea levelmonitori…     

利用GPS拖体在万山区域测量平均海面技术研究

Wanshan area has been chosen to be the specified field to calibrate and validate(Cal/Val) the HY-2 altimeter and its follow-on satellites. In March 2018, an experiment has been conducted to determine the sea surface height(SSH) under the HY-2 A ground track(Pass No. 203). A GPS towing-body(GPS-TB) was designed to measure the SSH covering an area of about 6 km×28 km wide centered on the HY-2 A altimeter satellite ground track. Three GPS reference stations, one tide gauge and a GPS buoy were placed in the research area, in order to process and resolve the kinematic solution and check the precision of the GPS-TB respectively. All the GPS data were calculated by the GAMIT/GLOBK software and TRACK module. The sea surface was determined by the GPS-TB solution and the tide gauge placed on Zhiwan Island. Then the sea surface of this area was interpolated by Arc GIS10.2 with ordinary Kriging method. The results showed that the precision of the GPS-TB is about 1.10 cm compared with the tide gauge placed nearby, which has an equivalent precision with the GPS buoy. The interpolated sea surface has a bias of –1.5–4.0 cm with standard deviation of 0.2–2.4 cm compared with the checking line. The gradient of the measured sea surface is about 1.62 cm/km along the HY-2 orbit which shows a good agreement compared with the CLS11 mean sea surface(MSS). In the Cal/Val of satellites, the sea surface between the tide gauge/GPS buoy and the footprint of altimeter can be improved by this work.     

海上风机吸力式桶形基础承载特性研究综述

风机基础作为海上风机整体结构的重要组成部分,承受着上部风机所受到的风浪流荷载,并且对风机的安全性及可靠性至关重要。吸力式桶形基础由于其安装简单和可重复利用等优点,在海洋平台基础中得到了广泛应用,并逐步应用于海上风机基础中。但由于海上风机与海洋平台在海洋环境中的荷载工况有一定的差别,仍需要通过对其承载特性研究现状进行全面认识,以实现吸力式桶形基础在海上风机基础中的可靠应用。文中通过总结和评价现有研究对桶形基础在不同土体条件以及荷载条件下进行试验及数值模拟分析得到的研究结果,综述了静荷载和循环荷载作用下砂土和黏土中的吸力式桶形基础的承载特性研究现状,以及海上风机吸力式桶形基础的相关研究。文章展望了目前应用于海上风机基础的桶形基础仍缺乏的研究,为海上风机吸力式桶形基础的可靠应用及后续研究提供重要参考。     

Effects of installation on the cyclic axial behaviour of suction buckets in sandy soils

Suction buckets differ with their easy and cost-efficient installation technique from other foundation types for offshore wind turbines. For successful completion of their installation process, suction is essential, but the imposed seepage leads to the changes in states of the soil in and around the bucket. Especially, a loosening of soil inside the bucket affects the load carrying behaviour of bucket subjected to repetitive loading resulting from environmental conditions. In this study, the behaviour of buckets under cyclic axial compressive loads with considering a possible loosening and related changes in permeability of soil inside the bucket is investigated numerically. In the framework of finite element analysis, a fully coupled two-phase model and a hypoplastic constitutive model are used to describe the saturated sandy soil behaviour under repetitive loading. The porosity-permeability variation is taken into account by Kozeny–Carman relationship. Special attention is dedicated to load carrying behaviour of bucket top plate, inner and outer skirt as well as base and their changes resulting from a loosening of soil inside the bucket with variable aspect ratio. For this purpose, cyclic axial compressive loads which cause an attenuation and progressive failure of soil-bucket system response are considered. The main findings on the changes in load carrying behaviour of bucket are presented and discussed.     

考虑冲刷影响的筒型基础竖向极限承载力研究

大直径宽浅式筒型基础,阻水宽度大,在位工作期间受波浪海流作用,其周围土体易被冲刷。为研究单侧地基土体受冲刷后筒型基础的竖向极限承载力变化,通过引进冲刷率的概念,采用有限元方法研究了不同冲刷率下筒型基础的竖向极限承载力;并基于Meyerhof理论建立了计算不同冲刷率下筒型基础竖向极限承载力的极限平衡方法。研究结果表明,随着冲刷率增大,筒型基础的极限承载力出现不同程度的下降,当冲刷率为0.8时,即筒型基础单侧土体冲刷深度达6.4 m时,筒型基础的竖向极限承载力折减率为3.28%。建立的极限平衡算法可准确计算冲刷条件下筒型基础的竖向极限承载力。     

Experimental study on wide-shallow composite bucket foundation for offshore wind turbine under cyclic loading

As an appropriate type of foundation for offshore wind turbines (OWTs), wide-shallow composite bucket foundation (WSCBF) is cost-competitive, and it has a unique and special substructure that comprises seven internal rooms arranged in a honeycomb-like structure. In this study, the cyclic behavior of WSCBF for OWTs embedded in saturated clay was investigated using a large-scale model subjected to lateral cyclic loading. The responses of foundation under constant- and various-amplitude cyclic loadings were recorded in terms of displacements, rotations, and bending moments. The variations in stiffness and damping were obtained, and a collaborative bearing mechanical model between the bucket and soil was considered, which was beneficial for improving the stiffness of the whole structure. Accumulative deformation was found to have little effect on the bearing capacity of the foundation. Dynamic analysis in frequency domain was further performed on both moment and rotation data, and the complex, frequency-dependent impedance was also studied.     

Direct determination of tidal levels for engineering applications based on biological observations

The scarcity of tide gauges in a global scale and the variability of the tidal levels along contiguous coasts mainly due to changing hydrographic conditions make the determination of tidal levels, especially of the Mean Sea Level, not an easy task. Determination of such levels with a precision of about 10 cm, necessary for most coastal engineering works, is usually based on records of temporary tide gauges or on geomorphological techniques. In this paper we present an alternative approach permitting to accurately identify tidal levels with a precision suitable for civil engineering applications based on biological observations on rocky shores, including breakwaters and quays. More specifically, we present evidence that the biological zonation, i.e. the distribution of coastal species in well-defined sub-horizontal belts, is practically insensitive to seasonal and other small-scale fluctuations of the sea level and is clearly related to certain levels, mostly the Mean Low Water (MLW). This approach, somewhat similar to what has been used in the past (for instance for the determination of the geodetic vertical datum in the Republic of Venice, Italy, till approximately AD 1800), permits direct determination of the Mean Sea Level or of other tidal levels on the basis of biological observations without statistical analyses of tide-gauge records with an accuracy of 5–10 cm, especially in microtidal, low-energy coasts.     

潮汐测量与验潮技术的发展

潮汐是由各天体作用于地球上的引潮力所产生，不仅海洋中有潮汐，大气圈和地球固体部分也同样存在着潮汐。海道测量中的潮汐测量仅指海洋潮汐测量仅指海洋潮汐测量，潮汐测量的手段很多，主要包括采用水尺；浮子式、引压钟式、声学式、压力式验潮仪验潮。而GPS验潮及潮汐遥感测量等技术研究国内外正在开展。所有这些验潮技术各有自己的特点。     

2008年中国沿岸冬季寒潮激发陆架波的小波分析

This study applies the wavelet analysis to the tidal gauge records, alongshore winds, atmospheric temperature and pressure along the China coast in winter 2008. The analysis results show three events of sea level oscillations(SLOs) on the shelf induced by winter storms. The first event occurred from January 9 to 21. The SLO periods were double-peaked at 1.6–5.3 and 7.0–16.0 d with the power densities of 0.04–0.05 and 0.10–0.15 m2·d, respectively.The second event occurred from February 5 to 18. The SLO period was single-peaked at 2.3–3.5 d with power density of 0.03–0.04 m2·d. The third event occurred from February 20 to March 8. The SLO periods were doublepeaked at 1.5–4.3 and 6.1–8.2 d with the power densities of 0.08–0.11 and 0.02–0.08 m2·d, respectively. The SLOs propagated along the coast from Zhejiang in north to Guangdong in south. The phase speeds ranged about 9–29m/s from Kanmen to Pingtan, 5–11 m/s from Xiamen to Huizhou and 11–22 m/s from Huizhou to Shuidong. The dispersion relation of the SLOs shows their nature of coastal-trapped wave.