GRADATION AND ASSESSMENT OF DAMAGE DEGREE OF NATURAL LANDSCAPE IN XING, AN COUNTY, GUANGXI

A new technique designed to help quantify the degree of damage to the landscape from one area to another shows a close relationship between population density and the degree of landscape damage. The technique establishes a scale of damage from 0 to 5 (zero = no damage; 5 = severe damage) using data from aerial photographs, land-use maps, and field data. The related formula allows one to compare the relative degree of damage across regions using a combination of an absolute index, a theoretical index, a relative index, and population density. Xing'an County is used to demonstrate the technique.     

HCN fluorescence on Titan

The HCN emission features near 3 μm recently detected by Geballe et al. (2003, Astrophys. J. 583, L39) are analyzed with a model for fluorescence of sunlight in the ν₃ band of HCN. The emission spectrum is consistent with current knowledge of the atmospheric temperature profile and the HCN distribution inferred from millimeter-wave observations. The spectrum is insensitive to the abundance of HCN in the thermosphere and the thousand-fold enhancement relative to photochemical models suggested by Geballe et al. (2003, Astrophys. J. 583, L39) is not required to explain the observations. We find that the spectrum can be matched with temperatures from 130 to 200 K, with slightly better fits at high temperature, contrary to the temperature determination of 130±10 K of Geballe et al. (2003, Astrophys. J. 583, L39). The HCN emission spectrum is sensitive to the collisional de-excitation probability, P₁₀, for the ν₃ state and we determine a value of 10⁻⁵ with an accuracy of about a factor of two. Analysis of absorption lines in the C₂H₂ν₃ band near 3 μm, detected in the same spectrum, indicate a C₂H₂ mole fraction near 0.01 μbar of 10⁻⁵ for P₁₀=10⁻⁴. The derived mole fraction, however, is dependent upon the value adopted for P₁₀ and lower values are required if P₁₀ at Titan temperatures is less than its room temperature value.     

第22太阳周活动区M级以上X射线耀斑指数的统计

本文对第２２太阳周（１９８７年１月至１９９２年１２月）中发生过Ｍ级以上的Ｘ射线耀斑（Ｈα耀斑级别≥Ｍ级，并伴有Ｘ射线的耀斑）对应的３９５个活动区资料进行了耀斑指数的统计，得到的结果：１．２２太阳周Ｍ级以上Ｘ射线耀斑级别综合指数表，２．２２太阳周Ｍ级以上Ｘ射线耀斑总指数表，３．第２２太阳周Ｍ级以上Ｘ射线耀斑总指数随时间的变化曲线，４．第２２太阳周Ｍ级以上Ｘ射线濯斑总指数直方图，该图表明第２２太阳周活动的极大年分别是１９８９和１９９１年，为第２３周太阳活动预报提供了可用参数。     

Long-chain alkenones and U37′ variability along a south–north transect in the Western Pacific Ocean

In this paper, we present 50 surface water samples collected during the IMAGES III cruise (June–July 1997) along a transect from New Zealand to the China Sea (42°S–178°E, 21°N–120°E) covering a temperature range from 13.3 to 30.4 °C. A very worthwhile aspect of this study is a coupling of both biomarker (alkenone) and coccolithophorid counting. We show that the U₃₇^k′–temperature relationship is very similar to the Prahl et al. [Geochim. Cosmochim. Acta 52 (1988) 2203] culture calibration and to the global core top calibration of Müller et al. [Geochim. Cosmochim. Acta 62 (1998) 1757]. However, in the warmest surface waters of the Western Pacific ocean (>26.4 °C) where Gephyrocapsa oceanica is likely the most widespread species, the associated U₃₇^k′ has a constant value of 1.0. The consequence is that above this temperature threshold, U₃₇^k′ cannot be used as an accurate paleothermometer.     

FUZZY COMPREHENSIVE EVALUATION OF CONTAINER TRANSPORTATION MODES ALONG THE CHANGJIANG RIVER MAIN LINE AND ITS DELTA AREA

The Changjiang River (Yangtze) is one of the fastest growth areas of container transportation in Chi-na. Rail, road and water transportation have competed against each other for container transportation in the Chang-jiang River main line and its delta area. It is of significance to assess these different transportation modes scientifi-cally in order to organize container transportation efficiently in this area and make decision for integral plan and construction of transportation system in this area. This paper outlines application of fuzzy comprehensive evaluation to appraise different modes of typical direction of containers. Twelve assessment indexes were decided. Membership functions were formulated. Evaluation results indicated that road transportation was optimal mode in the Changjiang River delta area, however water transportation was the primary way in the Changjiang River main line.     

Effects of Different Diets on the Dietary Attractability and Selectivity of Chinese Shrimp, Fenneropenaeus chinensis

Attractabilities of different diets and dietary selectivity of Chinese shrimp, Fenneropenaeus chinensis were studied through behavior observation and feeding experiment, respectively. The five diets used in the experiment are: Fish Flesh (FF), Shrimp Flesh (SF), Clam Foot (CF), Polychaete Worm (PW), and Formulated Diet (FD). No significant differences of attractability exist between any two different diets when every two natural diets or all five diets are provided simultaneously. On the other hand, significant differences of attractability exist between FD and every single natural diet when they are provided simultaneously. Results of behavioral observation indicate that natural diets are more attractive than FD. In feeding experiment, Chinese shrimp has distinct selectivity on different diets. It positively selects CF and PW, negatively selects FF and SF, and excludes FD absolutely. The results of the present studies indicate that the dietary selectivity of shrimp was based not only on the attractabilities of the diets, but also on the responses such as growth and food conversion.     

Temperature of the Icelandic crust: Inferred from electrical conductivity, temperature surface gradient, and maximum depth of earthquakes

Two different models of the structure of the Icelandic crust have been presented. One is the thin-crust model with a 10–15 km thick crust beneath the axial rift zones, with an intermediate layer of partially molten basalt at the base of the crust and on the top of an up-domed asthenosphere. The thick-crust model assumes a 40 km thick and relatively cold crust beneath central Iceland. The most important and crucial parameter to distinguish between these different models is the temperature distribution with depth. Three methods are used to estimate the temperature distribution with depth. First, the surface temperature gradient measured in shallow wells drilled outside geothermal areas. Second, the thickness of the seismogenic zone which is associated with a 750 °C isothermal surface. Third, the depth to a layer with high electrical conductivity which is associated with partially molten basalt with temperature around 1100 °C at the base of the crust. Combination of these data shows that the temperature gradient can be assumed to be nearly linear from the surface down to the base of the crust. These results are strongly in favour of the thin-crust model. The scattered deep seismic reflectors interpreted as Moho in the thick-crust model could be caused by phase transitions or reflections from melt pockets in the mantle.     

Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.     

Gouging abrasion test for rock abrasiveness testing

Wear parts of many mineral processing and mining equipment are often subjected to high stress loads applied at high speeds and at varying angles of incidence, where the prevalent mode of wear is high-stress gouging/sliding impact abrasion. Examples include crusher liners, wear liners in hoppers and chutes, picks on roadheaders, discs on tunnel boring machines and ground engaging tools. Abrasion under these conditions is characterised by a high material removal rate and thus has a direct bearing on wear rates and service life of the equipment concerned. However, at present there appears to be no method for rock abrasiveness assessment under these conditions. This paper describes a new Gouging Abrasion method and apparatus for testing abrasivity of rocks under high-stress gouging/sliding impact wear. A Gouging Abrasion Index (Gi) is introduced, which can be used for prediction and assessment of component life expectancy and efficiency of mineral processing and materials handling equipment. Experimental data from Gouging Abrasion testing of numerous Australian rock types are presented. It is suggested that the results of Gi testing can be used for wear rate predictions for a variety of mineral processing and materials handling equipment working under high-stress gouging/sliding impact abrasion conditions.     

沉积盆地有机质自由基热演化特征及其作为古温标的探索

恢复沉积盆地热历史的方法主要有古地温指标法和动力学模拟法两类.古温标法中最常用的为有机质成熟度和矿物裂变径迹,动力学模拟法中最常用的是盆地的拉张模型和挤压模型.本文针对Ⅰ型有机质自由基浓度作为沉积盆地古温标进行了探索研究.分析了自然演化系列Ⅰ型有机质的自由基的热演化特征;根据自然演化系列的Ⅰ型有机质自由基浓度及时间-温度指数(TTI)数据,对热模拟实验下的Ⅰ型有机质自由基浓度及时间-温度指数(TTI)值进行校正,由校正后的数据初步建立了Ⅰ型有机质的自由基浓度(Ng)与时间-温度指数(TTI)的定量模型.