Sensitivity of the surface temperature to changes in total solar irradiance calculated with the WRF model

The temperature sensitivity of the WRF model to changes in Total Solar Irradiance (TSI). The simulations were performed for a region centered over the North Atlantic Ocean, including portions of Eastern North America, Western Europe and Northwest Africa. Four simulations were run with different TSI values. Also, a fifth simulation was performed in which we varied the initial atmospheric conditions, in order to compare the effect on the temperature of both, changes in the TSI and initial atmospheric conditions. Comparing temperature monthly averages we found that changes in TSI and in the initial conditions have a measurable impact on temperature in the region of study. The sensitivity of the model using non-dimensional parameters was also estimated. The numerical experiments show some features that might allow to distinguish between the effects on the temperature due to changes in TSI from those caused by initial conditions. However, TSI changes are of the same order of magnitude than those of disturbances in the initial conditions. We also found that the mean monthly values of temperature over the full grid, did not present significant variations due to changes of either initial conditions or TSI.     

Innovative substructuring technique for hybrid simulation of multistory buildings through collapse

Hybrid simulation combines numerical and experimental methods for cost‐effective, large‐scale testing of structures under simulated dynamic earthquake loads. Particularly for experimental seismic collapse simulation of structures, hybrid testing can be an attractive alternative to earthquake simulators due to the limited capacity of most facilities and the difficulties and risks associated with a collapsing structure on a shaking table. The benefits of hybrid simulation through collapse can be further enhanced through accurate and practical substructuring techniques that do not require testing the entire structure. An innovative substructuring technique for hybrid simulation of structures subjected to large deformations is proposed to simplify the boundary conditions by overlapping the domains between the numerical and experimental subassemblies. The advantages of this substructuring technique are the following: it requires only critical components of the structure to be tested experimentally; it reduces the number of actuators at the interface of the experimental subassemblies; and it can be implemented using typically available equipment in laboratories. Compared with previous overlapping methods that have been applied in hybrid simulation, this approach requires additional sensing in the hybrid simulation feedback loop to obtain internal member forces, but provides significantly better accuracy in the highly nonlinear range. The proposed substructuring technique is verified numerically and validated experimentally, using the response of a four‐story moment‐resisting frame that was previously tested to collapse on an earthquake simulator. Copyright © 2014 John Wiley & Sons, Ltd.     

基于PSInSAR技术的长白山天池火山形变监测

将PSInSAR技术引入长白山天池火山的形变监测,获取了1992—1998年和2007—2010年2个时段的火山形变信息。结果显示:天池火山在这2个时段内整体抬升,1992—1998年火山较为活跃,雷达视线向平均形变速率为6mm/a,2007—2010年火山活动趋于平缓,雷达视线向平均形变速率为3mm/a;结合水准和GPS数据分析,发现火山口区域地表抬升明显,远离火山口处较为稳定。文中PSInSAR结果与水准数据能较好地吻合,且在空间上有较大覆盖范围,能更直观地反映火山地表的形变特征。     

断层气氢浓度观测技术试验研究

In order to explore the new technology and methods for seismic underground fluid observation, a test study on measurement of hydrogen concentration in fault gas is carried out at the piedmont fault zone of Zhongtiao Mountain. Through the experiment on observation positions, gas collection devices and sampling depths, the paper presents the observation method for fault gas hydrogen concentration by using an online automatic trace hydrogen analyzer. Comparative tests are conducted on the stability and optimum conditions of this type of instrument in the field environment, and the hydrogen concentrations at different measuring points of the same fault are observed. The results show that it is technically feasible to carry out continuous hydrogen concentration on a fault zone. The method proposed in this study could be a useful tool for setting the observation points, choosing a reasonable observation depth and scientific analysis of the observed data.     

基于OpenSees的混凝土结构连续倒塌分析中的从属节点建模技术

对重大工程结构进行强地震作用下的连续倒塌全过程分析并建立相应的设计与控制方法,已成为当前地震工程领域的发展趋势。目前,由于数值求解方面的困难,绝大多数针对极端作用下的结构连续倒塌的研究止步于数值临界状态的界定,在分析过程中不能实时地对结构构件的损伤状态进行监测并根据构件的损伤状态对分析模型进行修改。为了实现连续倒塌过程中构件的逐步失效,在OpenSees程序中,基于Beam with Hinges Element构建了端部带附属节点的Beam with Hinges Element,并根据构件失效情况对附属节点的多点约束进行控制。采用三次静力凝聚方法和Newmark-beta法,给出了对此改进建模技术可信的理论背景,方法的准确性通过一个简单框架算例得到了验证。     

Structural modal parameter identification and damage diagnosis based on Hilbert-Huang transform

Traditional modal parameter identifi cation methods have many disadvantages,especially when used for processing nonlinear and non-stationary signals.In addition,they are usually not able to accurately identify the damping ratio and damage.In this study,methods based on the Hilbert-Huang transform(HHT) are investigated for structural modal parameter identifi cation and damage diagnosis.First,mirror extension and prediction via a radial basis function(RBF) neural network are used to restrain the troublesome end-effect issue in empirical mode decomposition(EMD),which is a crucial part of HHT.Then,the approaches based on HHT combined with other techniques,such as the random decrement technique(RDT),natural excitation technique(NExT) and stochastic subspace identifi cation(SSI),are proposed to identify modal parameters of structures.Furthermore,a damage diagnosis method based on the HHT is also proposed.Time-varying instantaneous frequency and instantaneous energy are used to identify the damage evolution of the structure.The relative amplitude of the Hilbert marginal spectrum is used to identify the damage location of the structure.Finally,acceleration records at gauge points from shaking table testing of a 12-story reinforced concrete frame model are taken to validate the proposed approaches.The results show that the proposed approaches based on HHT for modal parameter identifi cation and damage diagnosis are reliable and practical.     

基于在线高分辨率示踪技术的岩溶泉污染来源及含水介质特征分析——以重庆黔江区鱼泉坎为例

在线高分辨率示踪技术以其精度高、成本低的特点在岩溶地下水文系统研究方面得到较为广泛的应用。重庆市黔江区鱼泉坎岩溶泉的污染问题导致蓬东乡、五里乡及其周边3 000居民饮水困难,为了确定水源地主要的污染源,选取荧光素钠、天来宝2种示踪剂,应用在线高分辨率示踪技术确定了重庆某畜禽养殖有限公司的化粪池与鱼泉坎泉之间存在水力联系。两种示踪剂的回收率均较低,分别为:荧光素钠3.51%,天来宝2.56%,且两回收曲线存在一定差别,可能与天来宝的水溶性较荧光素钠低有关。基于荧光素钠初现时间和首个峰值出现时间计算的地下水最大流速与平均流速分别为27.09 m/h、22.32 m/h,反映鱼泉坎岩溶孔隙、裂隙较小,化粪池污染渗漏缓慢、运移时间长。示踪剂质量浓度历时曲线表现为多峰型,推断化粪池至鱼泉坎泉段至少存在4条较大的径流通道,表明示踪段表层岩溶泉裂隙发育的相对均匀性。欲恢复鱼泉坎泉的水质,须对该养殖场进行防渗处理或勒令关闭。      

福建上杭北部地区矿床水文地质特征及勘探方法的应用

从分析区内水文地质特征入手,根据武平县悦洋银多金属矿区、上杭县古石背铀矿床、上杭县紫金山铜金矿区西北矿段铜矿床等水文地质特征,提出该区矿床水文地质勘探,应查明构造断裂带的特征,采用多种勘探方法相结合,加强地下水长期观测,正确地查明矿床水文地质条件和主要充水因素．准确预测矿坑涌水量。     

单层工业厂房-TMD减震控制系统研究

提出了采用质量调谐减震控制技术对厂房结构进行减震控制的方法。利用屋盖系统作为附加质量,屋盖支座采用夹层橡胶隔震垫,建立了厂房-TMD系统模型,并用非线性时程分析法对其进行了多种地震动激励下的计算分析,探讨了厂房-TMD减震体系减震效果的参数影响及减震机理。结果表明,采用质量调谐减震技术对单层工业厂房进行减震是一种有效的方法。     

伪谱法地震波正演模拟的多线程并行计算

地震波的正演模拟,尤其是3D正演模拟,往往涉及大规模的数据存储和计算,问题的规模往往超出计算机的物理内存,或者计算时间让问题的求解者难以忍受,即使采用目前存储和计算能力很强的计算机,其计算费用仍然是十分昂贵的.本文提出一种基于多线程协同使用多CPU和计算域分割的正演模拟并行计算技术,使得问题的求解过程得以加快,大大地缩短了用户等待的时间.为了检验我们的并行算法的可行性,文中以傅利叶正演模拟技术为例,给出了声波和3D各向异性弹性波模拟的例子,并对不同版本（串行、并行）运算效率进行了比较,证实了方法的有效性.