移动式测绘系统（MMS）的发展与应用

移动式测绘系统（MMS）已在交通管理、城市规划、地图更新、工程勘测、精准农业、战场测绘等领域广泛应用。本文在简要叙述MMS基本概念和主要功能的基础上，探讨了MMS的发展现状和应用方向，进而提出了当前发展MMS需要解决的关键技术，仅供参考。     

EFFECT OF FLOW CONDITIONS ON 3D MOVEMENT CHARACTERISTICS OF PARTICLES

1 INTRODUCTION The mechanism of particle movement in the flow is one of basic problems of sediment transport research. The conventional measurement approaches usually disturb the structure of the flow, consequently inducing errors. With the development of…     

Towards medium-term (order of months) morphodynamic modelling of the Teign estuary, UK

The main objective of this paper is to address the principal mechanisms involved in the medium-term (order of months to years) morphodynamic evolution of estuaries through the application of a process-based numerical modelling. The Teign estuary (Teignmouth, UK) is the selected site. The system is forced by the macrotidal semi-diurnal tide in the English Channel and is perturbed to a minor extent by high river discharge events (freshets). Although waves have a definite influence on the adjacent coastal area, Wells (Teignmouth Quay Development Environmental Statement: Changes to Physical Processes. Report R.984c:140. ABP Marine Environmental Research Ltd., Southampton, 2002b) suggested that swell waves do not enter the estuary. Hence, wave effects are neglected in this study, as only tides and the river discharge are taken into account. The sediment grain size is highly variable, but mainly sandy. Within the frame of the COAST3D project (), four bathymetric surveys of the adjacent coastal area were carried out at a nearly weekly intervals. The outer estuary and the adjacent coastal area were also surveyed every 6 months as part of the COASTVIEW project (). Based on these data and on continuously measured parameters, such as water level, waves, wind and river discharge, numerical modelling of the morphodynamic processes can be tested. To replicate the morphological changes in the medium-term within a feasible simulation time, forcing conditions are reduced through the use of an input reduction method (called ensemble technique). In this study, simulations are based on the coupling between Telemac-2D and its non-cohesive sediment transport module, Sisyphe (version 5.3 for both modules). Three different sediment transport formulae were tested: (1) Engelund and Hansen (A monograph on sediment transport in alluvial streams, 3rd edn. Technological University of Denmark, Copenhagen, 1967) including the modifications proposed by Chollet and Cunge (J Hydraul Eng 17(1):1–13, 1979); (2) Bijker (Mechanics of sediment transport by the combination of waves and current. In: Design and reliability of coastal structures. 23rd international conference on Coastal Engineering, pp 147–173, 1968) and (3) Soulsby (Dynamics of Marine Sands. A manual for practical applications. HR Wallingford, Wallingford, p 142, 1997) modified version of van Rijn [J Hydraul Eng 110(10):1431–1456, 1984a, J Hydraul Eng 110(11):1613–1641, 1984b] formulation. Both a qualitative (i.e. visual comparison) and a quantitative tool [Brier Skill Score (BSS); described in Sutherland et al. in Coast Eng 51:917–939, 2004b] are applied to assess the similarity of simulations when compared to model predictions and observations. Tests confirmed the reliability and time efficiency of the ensemble technique, since it reproduced very well the results of a reference run, a computation based on the observed boundary conditions. For the spring-neap cycle modelled, the BSS was of 0.91 (a perfect modelling would have a BSS of 1), with a reduction in the simulation time on the order of 80%. For the 6-month-period simulation, results were also excellent: BSS=0.92 and a computer time reduction of 85%. In principle, this method has the advantage of being applied to any process-based numerical model.     

华北平原冬麦田土壤CH4的吸收特征研究

利用静态箱/气相色谱(GC)法,对华北平原冬小麦拔节-成熟期间麦田土壤CH₄气体通量进行了测定,得出华北平原典型冬麦田土壤是大气CH₄的弱吸收汇。试验期间土壤CH₄通量存在明显的季节变化和日变化,麦田拔节-成熟期间土壤CH₄通量日平均值为-18.3μg·m^-2·h^-1,波动范围为-4.3-24.4μg·m^-2·h^-1;在土壤CH₄通量的日变化中,观测到麦田土壤在午间和夜间都有一个吸收峰,峰值出现的时间因生育期不同而有所不同。试验期间CH₄通量日平均值与土壤温度关系不明显,而与土壤水分呈负相关(α=0.01);日变化中土壤CH₄通量与地表温度的相关性较差,而与5cm地温相关密切。麦田拔节-成熟期间土壤CH₄通量日平均值随NH4+-N施用量的增加呈递减规律,农田秸秆还田后不利于土壤对CH₄的吸收。     

新疆乌苏市农七师红山煤矿2号矿区钻探施工技术

本文从施工设备及技术处理等方面阐述了红山煤矿2号矿区钻探施工工艺,为进一步开展煤田勘查施工工作提供了借鉴。     

瞬态瑞雷面波勘探技术在工程勘察评价中的应用

文章介绍了瞬态瑞雷面波勘探技术的理论基础和勘探原理、工作方法、资料的整理与解释，并结合工程实例说明瞬态面波勘探技术的应用效果。     

高纯球形-准球形亚微米晶质SiO2材料的制备与表征

以天然粉石英为基本原料,通过氢氟酸与盐酸混合酸溶蚀技术和机械强力搅拌处理,制备了高纯球形-准球形亚微米晶质SiO2材料。XRD,SEM表征结果表明,制备的高纯球形亚微米晶质SiO2材料为纯结晶SiO2相,粒子呈球形-准球形,球化-准球化率达80%～90%,粒径一般为300 nm～800 nm;其化学组成为:w(SiO2)99.90%,w(Al2O3)192×10-6,w(Fe2O3)33×10-6,w(Mg)1×10-6,w(Ca)2×10-6,w(Cl-)20×10-6。     

九江-瑞昌地震的精确定位及其发震构造初探

联合采用双差法和主事件法,对2005年11月26日发生在江西省九江县与瑞昌市交界的5.7级地震序列进行了重新定位,并在此基础上讨论了5.7级主震的震源机制解和可能的发震构造。结果显示:精定位后震源位置的估算误差在EW方向上平均为0.31km,NS方向上平均为0.40km,竖直方向上平均为0.48km,故而得到了更加精细的空间分布图像。此次地震序列在NNW-NW向呈现优势分布,震源深度主要集中在8～14km,又以10～12km最具优势。主震的震源位置大致为北纬29.69°,东经115.74°,震源深度约10.8km。结合地震序列优势分布、主震震源机制解和震区NE向、NW向断裂发育的构造背景,初步推测本次地震序列的主震可能是由瑞昌盆地内的一条NW向隐伏断层活动引发的,发震断层的性质有待于进一步研究。     

偏重钻铤在丁集矿冻结造孔施工中的应用

钻井技术的关键是预防及控制孔斜,通过对目前常用4种防斜钻具组合的适岩性、井深、井斜及钻效等指标对比,在冻结造孔施工中选用了适用地层广、防斜性能好并具有纠斜作用的偏重钻铤。为发挥偏重钻铤的防斜作用,宜增大转速,并使钻铤减去部分的重量应位于离轴线尽可能远的部位。在淮南丁集冻结孔施工的三十多口钻孔中,井斜一般均在0．5°以内,钻效超过2400m/台·月。     

磁铁矿采空区处理施工工艺与技术方法探讨

文章系统地介绍了采用地质钻机成孔,高压注浆机进行充填注浆的施工方法。为了将水泥砂浆及水泥粉煤灰浆填入采空区,采用能施加高压的输送泵及高压注浆设备、铸铁注浆管、水泥封孔的注浆工艺处理采空区铁路路基。在信息化施工过程中,通过试验不断地调整设计方法、改进施工工艺,在处理巨型磁铁矿采空区工程实践中达到了预期的目标。施工中,在控制充填边界、封孔方法及施工工艺等方面有一定的创新。提出的采空区施工技术控制、质量检测与评价方法,对同类工程勘察、设计及施工具有一定的参考价值。