The response of an elastic half‐space under a momentary shear line impulse

The response of an ideal elastic half‐space to a line‐concentrated impulsive vector shear force applied momentarily is obtained by an analytical–numerical computational method based on the theory of characteristics in conjunction with kinematical relations derived across surfaces of strong discontinuities. The shear force is concentrated along an infinite line, drawn on the surface of the half‐space, while being normal to that line as well as to the axis of symmetry of the half‐space. An exact loading model is introduced and built into the computational method for this shear force. With this model, a compatibility exists among the prescribed applied force, the geometric decay of the shear stress component at the precursor shear wave, and the boundary conditions of the half‐space; in this sense, the source configuration is exact. For the transient boundary‐value problem described above, a wave characteristics formulation is presented, where its differential equations are extended to allow for strong discontinuities which occur in the material motion of the half‐space. A numerical integration of these extended differential equations is then carried out in a three‐dimensional spatiotemporal wavegrid formed by the Cartesian bicharacteristic curves of the wave characteristics formulation. This work is devoted to the construction of the computational method and to the concepts involved therein, whereas the interpretation of the resultant transient deformation of the half‐space is presented in a subsequent paper. Copyright © 2003 John Wiley & Sons, Ltd.     

RXTE observations of the transient sources IGR J17091-3624 and IGR J18539+0727

We present the results of our analysis of the RXTE observations for two transient sources, IGR J17091-3624 and IGR J18539+0727, in April 2003. The derived energy spectra of the sources and the power-density spectra of their light curves make it possible to classify them as low/hard-state X-ray binaries. The parameters of the power spectrum for IGR J18539+0727 lead us to tentatively conclude that the compact object in this binary is a black hole.     

Interpretation of transient electromagnetic soundings over three-dimensional structures for the central-loop configuration

Summary. An assessment is made of the bias of fitting constrained layered-earth models to transient electromagnetic data obtained over 3-D structures. In this assessment we use the central-loop configuration and show that accurate estimates of the depth of burial of 3-D structures can be obtained with layered-earth model fitting. However, layered-earth interpretations are not reliable for estimating depth extents and resistivities of 3-D structures. When layered earths are used for interpretation, it is advantageous in some cases to use data based on the magnetic field instead of the voltage. A magnetic-field definition of apparent resistivity, in contrast to a definition based on the voltage, eliminates apparent-resistivity overshoots and undershoots in the data. A resistivity undershoot in the data can produce an extraneous and misleading layer in an interpretation of a 3-D resistive structure. Due to 3-D effects, apparent-resistivity soundings (magnetic field and voltage) may rise so steeply at late times that it may not be possible to fit a sounding to a reasonable layered-earth model. Truncating such a sounding, over a buried conductor, allows for a reasonable layered-earth fit and an accurate estimate of the depth to the conductor. However, the resistivity of the conductor is overestimated.
Measurements of the horizontal field in the central-loop configuration can map 3-D structures, provided the sensor is located accurately at the centre of the transmitting loop. Horizontal-field calculations show that the transients peak on the flanks of a 3-D structure, but are depressed over the structure's centre. Weak transient responses flanked by two large transient responses, which are opposite in sign, locate the structure. The sign reversal is caused by a corresponding reversal in the currents that are channelled through or deflected away from conductive or resistive structures, respectively.     

瞬变电磁法探测公路隧道工程中的不良地质构造

为了给公路设计部门提供选线依据,运用瞬变电磁法在山西境内的某两条高速公路隧道工程设计线路段上进行探测,以查明下覆不良地质构造的发育情况.通过对瞬变电磁法的探测能力进行理论上的讨论,对不同地电断面情况下的异常体电磁响应的定性分析,得出用瞬变电磁法探测不良地质体的可行性结论.经过资料处理,查出不良地质构造赋存的位置,解释结果与钻探资料完全吻合.     

Environmental contamination of Zn,Cd, Ni,Cu, and Pb from industrial areas in Hamadan Province,western Iran

Eleven surface soil samples from calcareous soils of industrial areas in Hamadan Province, western Iran were analyzed for total concentrations of Zn, Cd, Ni, Cu and Pb and were sequentially extracted into six fractions to determine the bioavailability of various heavy metal forms. Total Zn, Cd, Ni, Cu and Pb concentrations of the contaminated soils were 658 (57–5,803), 125.8 (1.18–1,361), 45.6 (30.7–64.4), 29.7 (11.7–83.5) and 2,419 (66–24,850) mg kg⁻¹, respectively. The soils were polluted with Zn, Pb, and Cu to some extent and heavily polluted with Cd. Nickel values were not above regulatory limits. Copper existed in soil mainly in residual (RES) and organic (OM) fractions (about 42 and 33%, respectively), whereas Zn occurred essentially as RES fraction (about 69%). The considerable presence of Cd (30.8%) and Pb (39%) in the CARB fraction suggests these elements have high potential biavailability and leachability in soils from contaminated soils. The mobile and bioavailable (EXCH and CARB) fractions of Zn, Cd, Ni, Cu, and Pb in contaminated soils averaged (7.3, 40.4, 16, 12.9 and 40.8%), respectively, which suggests that the mobility and bioavailability of the five metals probably decline in the following order: Cd = Pb > Ni > Cu > Zn.     

Regional distribution pattern of groundwater heavy metals resulting from agricultural activities

Contaminations of groundwater by heavy metals due to agricultural activities are growing recently. The objective of this study was to evaluate and map regional patterns of heavy metals (Cd, Zn and Cu) in groundwater on a plain with high agricultural activities. The study was conducted to investigate the concentration of heavy metals and distribution in groundwater in regions of Shush Danial and Andimeshk aquifers in the southern part of Iran. Presently, groundwater is the only appropriate and widely used source of drinking water for rural and urban communities in this region. The region covers an area of 1,100 km² between the Dez and Karkhe rivers, which lead to the Persian Gulf. For this study, the region was divided into four sub-regions A, B, C and D. Additionally, 168 groundwater samples were collected from 42 water wells during the earlier months of 2004. The flame atomic absorption spectrometry (AAS-Flame) was used to measure the concentration of heavy metals in water samples and the Surfer software was used for determination of the contour map of metal distribution. The results demonstrated that in all of the samples, Cd and Zn concentrations were below the EPA MCLG and EPA secondary standard, respectively. However, the Cu contents of 4.8 % of all samples were higher than EPA MCL. It is also indicated that the concentrations of metals were more pronounced at the southern part of the studied region than at the others. The analysis of fertilizers applied for agricultural activities at this region also indicated that a great majority of the above-mentioned heavy metals were discharged into the environment. Absence of confining layers, proximity to land surface, excess agricultural activities in the southern part and groundwater flow direction that is generally from the north to the southern parts in this area make the southern region of the Shush plain especially vulnerable to pollution by heavy metals than by other contaminants.     

Circulation in the Gulf of Aqaba (Red Sea) during winter—spring

This study is devoted to oceanographic features of the semi-enclosed Gulf of Aqaba, Red Sea. The data were recorded in winter—spring 1999 on the R/V Meteor cruise leg 44/2. Temperature and salinity profiles were measured at six positions (I—VI). The shipboard NarrowBand Acoustic Doppler Current Profiler (NB ADCP) 150 kHz continuously recorded current profiles down to 350 m en route. The research revealed that the current near the Strait of Tiran front (position VI) represents a semidiurnal signal of an internal tide wave (∼12 h period; 0.2 ms⁻¹ amplitude) that might be generated by the barotropic tide at the sill of the Strait. A sequence of cyclonic and anticyclonic eddy pairs is found along the axis of the Gulf of Aqaba during winter-spring seasons. These sub-mesoscale signals are dominant above the main thermocline and might be caused by wind forcing and the narrowness of the Gulf; it might remain in other seasons with different dimensions in relation to the depth of thermocline. The total diameter of each pair was twice the baroclinic Rossby radius (R ≈ 10 km). A single anti-cyclonic eddy was observed in the upper 300 m in the northern tip of the Gulf with a diameter of about 5–8 km.     

CO<Subscript>2</Subscript> Flux Measurements over the Sea Surface by Eddy Correlation and Aerodynamic Techniques

The measurements of the vertical transport of CO₂ were carried out over the Sea of Japan using the specially designed pier of Kyoto University on September 20 to 22, 2000. CO₂ fluxes were measured by the eddy correlation and aerodynamic techniques. Both techniques showed comparable CO₂ fluxes during sea breeze conditions: −0.001 to −0.08 mg m⁻²s⁻¹ with the mean of −0.05 mg m⁻²s⁻¹. This means that the measuring site satisfies the fetch requirement for meteorological observations under sea breeze conditions. Moreover, the eddy diffusivity coefficient used in the aerodynamic technique is found to be consistent with the coefficient used in the eddy correlation technique. The present result leads us to conclude that the aerodynamic technique may be applicable to underway CO₂ flux measurements over the ocean and may be used in place of the bulk technique. The important point is the need to maintain a measuring accuracy of CO₂ concentration difference of the order of 0.1 ppmv on the research vessels or the buoys.     

夏季南海上层环流动力机制的数值研究

通过利用一个分区性的正压-斜压衔接模式来探讨夏季南海的上层环流特征及其动力机制,结果表明:夏季期间,由于风生环流的不稳定性促使在东沙群岛附近的气旋涡的强度及位置发生变化,并间接导致黑潮侵入南海北部的程度变化以及气旋涡南侧的反气旋式环流、西沙群岛西南侧的气旋涡的强度和范围出现波动现象;在南海南部的北向西边界流由于离岸的西南季风所驱动在中南半岛中部沿岸脱离岸线往东北方向的流动,导致沿岸的水体大量流失而在沿岸形成一支南向补偿流并在西沙群岛西南侧诱生一气旋涡,而上述的离岸西边界流则作顺时针方向流动,从而在南海南部形成反气旋式大环流;在南沙海槽附近出现的局地气旋涡和万安滩附近的气旋涡分别受β效应、底形效应的作用而形成.     

冲绳海槽中段沉积岩芯碳酸盐和烧失量的古环境意义

对冲绳海槽中段 3个沉积岩芯碳酸盐和烧失量的系统分析得知 ,岩芯沉积物的CaCO3含量一般 >1 0 % ,最高含量接近 30 % ,烧失量大都在 1 0 %～ 30 %之间变化 ,反映了该海区处于溶跃面之上钙质生物极为发育的生物地球化学环境。结合δ1 8O曲线所反映的气候环境变化 ,探讨了 1 2 0kaB .P .以来碳酸盐旋回的“大西洋型”演变特点 ,同时对该区沉积地层中的火山热液活动印记作了一定的探讨。