Can flat-ramp-flat fault geometry be inferred from fold shape?: A comparison of kinematic and mechanical folds

The inference of fault geometry from suprajacent fold shape relies on consistent and verified forward models of fault-cored folds, e.g. suites of models with differing fault boundary conditions demonstrate the range of possible folding. Results of kinematic (fault-parallel flow) and mechanical (boundary element method) models are compared to ascertain differences in the way the two methods simulate flexure associated with slip along flat-ramp-flat geometry. These differences are assessed by systematically altering fault parameters in each model and observing subsequent changes in the suprajacent fold shapes. Differences between the kinematic and mechanical fault-fold relationships highlight the differences between the methods. Additionally, a laboratory fold is simulated to determine which method might best predict fault parameters from fold shape. Although kinematic folds do not fully capture the three-dimensional nature of geologic folds, mechanical models have non-unique fold-fault relationships. Predicting fault geometry from fold shape is best accomplished by a combination of the two methods.     

行业发展时局综述与可持续发展思考

随着国民经济的持续快速发展和城镇化进程的加快,建筑业作为国民经济的重要行业迎来了难得历史机遇,建筑设计行业作为建筑业的重要组成部分,发挥着越来越重要的作用。随着经济增长方式地转变和产业结构调整地不断深入,建筑设计行业来到了历史发展的关键点,如何落实科学发展观,实现行业发展健康、可持续并始终引领建筑业发展,应引行业从业人员地重视与思考。     

堆石料强度变形特性与非线性弹性本构模型研究

在大型三轴试验研究的基础上,提出了堆石料应力-应变关系、侧向应变与轴向应变关系的指数函数表达式,以及抗剪强度包线在q-p平面上的幂函数表达式。继而推导得到了一个反映堆石料强度与变形特性的非线性弹性本构模型。通过对实体工程的数值模拟,将Duncan E-B模型与新建模型进行了对比分析,验证了该模型的可行性。     

On Minerogenetic Series: The Third Discussion

The minerogenetic(or metallogenetic) series of mineral deposits(called minerogenetic series for short) is an academic idea(concept) of studying minerogenetic characteristics in mineral deposit geology. It uses the views of systematology and mobilism to study mineralizing processes and naturally occurring mineral deposit assemblages formed in various stages of geological development in specific tectonic environments. The minerogenetic series is also a natural classification of mineral deposits. T...     

Pes shape variation in an ornithopod dinosaur trackway (Lower Cretaceous,NW Spain): New evidence of an antalgic gait in the fossil track record

Trackways can provide unique insight to animals locomotion through quantitative analysis of variation in track morphology. Long trackways additionally permit the study of trackmaker foot anatomy, providing more insight on limb kinematics. In this paper we have restudied the extensive tracksite at Barranco de La Canal-1 (Lower Cretaceous, La Rioja, NW Spain) focussing on a 25-m-long dinosaur (ornithopod) trackway that was noted by an earlier study (Casanovas et al., 1995; Pérez-Lorente, 2003) to display an irregular pace pattern. This asymmetric gait has been quantified and photogrammetric models undertaken for each track, thus revealing distinct differences between the right and the left tracks, particularly in the relative position of the lateral digits II–IV with respect to the central digit III. Given that the substrate at this site is homogenous, the consistent repetition of the collected morphological data suggests that differences recorded between the right and the left tracks can be linked to the foot anatomy, but more interestingly, to an injury or pathology on left digit II. We suggest that the abnormal condition registered in digit II impression of the left pes can be linked to the statistically significant limping behaviour of the trackmaker. Furthermore, the abnormal condition registered did not affect the dinosaur's speed.     

Application of stress mapping in cross‐section to understanding ore geometry,predicting ore zones and development of drilling strategies

Stress mapping is a numerical modelling technique used to determine the distribution and relative magnitude of stress during deformation in a mineralised terrane. It is based on the general principle that fluid flow in the Earth's crust is primarily related to pressure gradients. It is best applied to epigenetic hydrothermal mineral deposits, where fluid flow and fluid flux are enhanced in dilational sections of structures and in sites of enhanced rock permeability due to high fracture density. These are defined by sites of low minimum principal stress (σ₃). Most stress mapping is carried out in two dimensions in plan view using geological maps. This is suitable for terranes with steeply dipping lithostratigraphy and structures in which the distribution of mineral deposits is largely controlled by fault structures portrayed on the maps. However, for terranes with gently dipping sequences and structures, and for situations where deposits are sited in and near the hinges of complex fold structures, stress mapping in cross‐section is preferable. The effectiveness of stress mapping is maximised if mineralisation was late in the evolutionary history of the host terrane, and hence the structural geometry of the terrane and contained deposits were essentially that expressed today. The orientation of syn‐mineralisation far‐field stresses must also be inferred. Two examples of orogenic gold deposits, which meet the above criteria, are used to illustrate the potential of stress mapping in cross‐section. Sunrise Dam, located in the Archaean Yilgarn Craton, is a lode‐gold deposit sited in a thrust‐fold belt. Stress mapping illustrates the heterogeneity of stress distribution in the complex structural geometry of the deposit, and predicts the preferential siting of ore zones around the intersections of more steeply dipping, linking thrusts and banded iron‐formation units, and below the controlling more gently dipping basal thrust, the Sunrise Shear. The Howley Anticline in the Pine Creek block hosts several Palaeoproterozoic gold deposits, sited in complex anticlinal structures in greywacke sequences. Stress mapping indicates that gold ores should develop in the hinge zones of symmetrical anticlines, in the hinge zones and more steeply dipping to overturned limbs of asymmetric anticlines, and in and around thrusts in both anticlines and parasitic synclines. The strong correlation between the predictions of the stress mapping, based on the distribution of low σ₃, and the location of gold ores emphasises the potential of stress mapping in cross‐section, not only as an exploration tool for the discovery of additional resources or deposits, but also as a test of geological models. Knowledge of the potential siting of gold ores and their probable orientations also provides a guide to drilling strategies in both mine‐ and regional‐scale exploration.     

Crustal structure of the Ordovician Macquarie Arc,Eastern Lachlan Orogen,based on seismic‐reflection profiling

In the Eastern Lachlan Orogen, the mineralised Molong and Junee‐Narromine Volcanic Belts are two structural belts that once formed part of the Ordovician Macquarie Arc, but are now separated by younger Silurian‐Devonian strata as well as by Ordovician quartz‐rich turbidites. Interpretation of deep seismic reflection and refraction data across and along these belts provides answers to some of the key questions in understanding the evolution of the Eastern Lachlan Orogen—the relationship between coeval Ordovician volcanics and quartz‐rich turbidites, and the relationship between separate belts of Ordovician volcanics and the intervening strata. In particular, the data provide evidence for major thrust juxtaposition of the arc rocks and Ordovician quartz‐rich turbidites, with Wagga Belt rocks thrust eastward over the arc rocks of the Junee‐Narromine Volcanic Belt, and the Adaminaby Group thrust north over arc rocks in the southern part of the Molong Volcanic Belt. The seismic data also provide evidence for regional contraction, especially for crustal‐scale deformation in the western part of the Junee‐Narromine Volcanic Belt. The data further suggest that this belt and the Ordovician quartz‐rich turbidites to the east (Kirribilli Formation) were together thrust over ?Cambrian‐Ordovician rocks of the Jindalee Group and associated rocks along west‐dipping inferred faults that belong to a set that characterises the middle crust of the Eastern Lachlan Orogen. The Macquarie Arc was subsequently rifted apart in the Silurian‐Devonian, with Ordovician volcanics preserved under the younger troughs and shelves (e.g. Hill End Trough). The Molong Volcanic Belt, in particular, was reworked by major down‐to‐the‐east normal faults that were thrust‐reactivated with younger‐on‐older geometries in the late Early ‐ Middle Devonian and again in the Carboniferous.     

Predictive GIS-Based Model of Rockfall Activity in Mountain Cliffs

Rockfall susceptibility has been analysed in mountain cliffs of the Cantabrian Range, North Spain. The main aim of this analysis has been to build a predictive model of rockfall activity from a low number of environmental and geological variables. The rockfall activity has been quantified in a GIS. The cartographic information used shows the spatial distribution of all the recent talus screes as well as their associated source areas in the rock-slopes. The area relation At/Ar (recent talus scree polygon/source basins) in the rock slopes has been used as the rockfall activity indicator. This relation has been validated in 50 pilot rock-slopes and compared with the relation number of recent rock fragments/source basin, obtained from field work. The environmental factors causing rockfall depend on the rock slope situation, and these are: altitude and sun radiation on the rock cliff. The geological factors considered are: lithology, relative position of the main discontinuities with respect to the topographic surface and two morphologic parameters: the roughness and slope gradient. A logistic regression analysis has been applied to a population of 442 limestone and quartzite rock cliffs. The dependent variable is the rockfall activity indicator, which allows the definition of two classes of rock cliff units: low and high activity. The independent variables are altitude, sun radiation (equinox radiation, summer solstice radiation, winter solstice radiation), slope roughness, slope gradient,anisotropy and lithology. Results suggest that it is possible tobuild a valid cartographic predictive model for rockfall activity in mountain rock cliffs from a limited number of easily obtainable variables. The method is especially applicable in massive rock slopes or in regions with uniform rock mass characteristics.     

冰川区不同气温估算方法评估 ——以藏东南帕隆4号冰川为例

冰川作为地表特殊的下垫面,冰川区内气温明显低于同高度非冰川区大气温度。如何利用低海拔非冰川区观测资料精确估算高海拔冰川区气温,直接关系着青藏高原冰川消融估算及其水文效应的评估。利用架设在藏东南帕隆藏布4号冰川不同高度带的四台自动气象站资料,分析了冰川区与非冰川区气温的波动特征,评估了迄今为止通用的线性递推模型（DT模型）、分段拟合模型（SM模型）和简化热力学模型（GB模型）三种方法在藏东南冰川区气温估算方面的应用效果。对比研究发现：SM模型在帕隆4号冰川上的模拟效果最为理想且操作相对简单;传统DT模型在消融区存在严重的高估,帕隆4号冰川表面夏季（6-8月）正积温的高估比例接近39%;GB模型由于受到诸如冰川风边界层厚度等不确定性的影响,降低了大范围温度估算的可操作性。     

辽东青城子金银多金属成矿区综合信息找矿模型及找矿远景分析

辽东青城子地区是我国重要的有色和贵金属成矿区。在分析其成矿地质条件、地球化学和地球物理特征、遥感影像特征的基础上,建立了综合信息找矿模型,提出了有利的含矿层位、各级断裂构造及中生代岩体对金银多金属矿化起着重要的控制作用。在找矿模型的指导下,该地区主要通过详细地质调查、水系沉积物测量、高精度磁测扫面、遥感解译等工作,寻找与矿化有关的异常信息,进一步筛选出10余处可供调查评价并且资源潜力巨大的找矿远景区。