Investigation of the effect of aggregate shape and surface roughness on the slake durability index using the fractal dimension approach

Argillaceous rocks cover about one thirds of the earth's surface. The major engineering problems encountered with weak- to medium-strength argillaceous rocks could be slaking, erosion, slope stability, settlement, and reduction in strength. One of the key properties for classifying and determining the behavior of such rocks is the slake durability. The concept of slake durability index (SDI) has been the subject of numerous researches in which a number of factors affecting the numerical value of SDI were investigated. In this regard, this paper approaches the matter by evaluating the effects of overall shape and surface roughness of the testing material on the outcome of slake durability indices.

For the purpose, different types of rocks (marl, clayey limestone, tuff, sandstone, weathered granite) were broken into chunks and were intentionally shaped as angular, subangular, and rounded and tested for slake durability. Before testing the aggregate pieces of each rock type, their surface roughness was determined by using the fractal dimension. Despite the variation of final values of SDI test results (values of I_d), the rounded aggregate groups plot relatively in a narrow range, but a greater scatter was obtained for the angular and subangular aggregate groups. The best results can be obtained when using the well rounded samples having the lowest fractal values. An attempt was made to analytically link the surface roughness with the I_d parameter and an empirical relationship was proposed. A chart for various fractal values of surface roughness to use as a guide for slake durability tests is also proposed. The method proposed herein becomes efficient when well rounded aggregates are not available. In such condition, the approximate fractal value for the surface roughness profile of the testing aggregates could be obtained from the proposed chart and be plugged into the empirical relation to obtain the corrected I_d value. The results presented herein represent the particular rock types used in this study and care should be taken when applying these methods to different type of rocks.     

Glacial survival of blockfields on the Varanger Peninsula, northern Norway

For more than hundred years it has been debated whether blockfields in mountain summit areas can be used to delimit the vertical extent of Pleistocene ice sheets. In this study the relationship between blockfields, developed in quartzites and sandstones on the Varanger Peninsula, northern Norway, and glacially derived features have been evaluated. Erratics and circular ablation moraines are superimposed on the blockfields and lateral meltwater channels are eroded into them. Glacial striations and other signs of glacial sculpturing are restricted to low-lying areas with channelled ice flow. Relative ages of the blockfields and the features in them are inferred, and the first measurements of in-situ produced cosmogenic nuclides from the Varanger Peninsula are reported. We conclude that the blockfields have survived underneath at least one thick, cold-based ice sheet. Thus, these blockfields cannot be used as indicators of ice-free conditions as previously suggested for southern Norway. Our results have implications for the potential for land surface preservation beneath ice sheets and for glacial reconstructions in northern Fennoscandia.     

关于角平分线法建立线状缓冲区算法的改进

分析了用对角平分线法建立缓冲区的算法,提出了一种新的求角平分线和缓冲点的方法,实践证明其在算法实现方面是可行的,而且效果比较理想。     

GIS中直线元内插点精度及对误差带的影响

基于误差传播定律，考虑参数r误差影响，推导了线元内插点的精度计算公式，讨论内插点精度对线元误差带的影响，并对影响的结果进行了分析，得到了一些有益的结论。     

新疆鄯善康古尔塔格蛇绿岩及其大地构造意义

康古尔塔格蛇绿岩的岩石组合为变质橄榄岩-堆晶橄榄岩-辉长岩-斜长花岗岩-辉绿岩-玄武岩。方辉橄榄岩（蛇纹岩）、蛇纹石化辉石岩、蚀变辉长岩与特罗多斯蛇绿岩中同类型岩石类似，岩石总体低钾。变质橄榄岩MgO／（MgO＋TFeO）为0．834～0．866，TiO，（wt％）为0．02％，为SSZ型蛇绿岩的变质橄榄岩。玄武岩的构造环境判别显示其形成于边缘海盆。放射虫硅质岩的Al2O3／（Al2O3＋Fe2O3）值平均为0．047，MnO／TiO2比值平均为0．93，Ce具负异常，Ce／Ce^＊=0．548，Lan／Cen=1．661．表明放射虫硅质岩的形成环境与洋中脊有密切关系。该蛇绿岩位于塔里木板块和哈萨克斯坦-准噶尔板块的艾比湖-康古尔塔格缝合线上，为一套无序产出的古生代北天山洋在该区的古洋壳残片。     

Effects of laser beam alignment tolerance on lidar accuracy

One of the major lidar error sources not yet analyzed in the literature is the tolerance of the laser beam alignment with respect to the scanning mirror. In this paper, the problem of quantifying these errors is solved for rotating polygon mirror type lidar systems. An arbitrary deviation of the beam from its design direction–the vector of beam misalignment–can be described by two independent parameters. We choose these as horizontal and vertical components of the misalignment vector in the body frame. Either component affects both, horizontal and vertical lidar accuracy. Horizontal lidar errors appear as scan line distortions—along and across track shifts, rotations and scaling. It is shown that the horizontal component of misalignment results in a scan line first being shifted across the track and then rotated around the vertical at the new center of the scan line. Resulting vertical lidar error, being a linear function of the scan angle, is similar to that produced by a roll bias. The vertical component of the beam misalignment causes scan line scaling and an along track shift. The corresponding vertical error is quadratic with respect to the scan angle. The magnitude of these effects is significant even at tight alignment tolerances and cannot be realistically accounted for in the conventional calibration model, which includes only range, attitude and GPS biases. Therefore, in order to attain better accuracy, this model must be expanded to include the beam misalignment parameters as well. Addition of new parameters into the model raises a question of whether they can be reliably solved for. To give a positive answer to this question, a calibration method must utilize not only ground control information, which is typically very limited, but also the relative accuracy information from the overlapping flight lines.     

中尺度模式中的边界层特征量分析

在中尺度数值天气预报模式MM4中，用level3及E-ε-l两种湍流闭合方法对原总体边界层参数化方案进行改进，使得中尺度模式中可以直接输出有关湍流量，并对地表通量参数化方案进行改进，进而对不同下势需如沙漠，植被上的有关湍流量和边界层特征量进行分析。研究中尺度系统中边界层结构的特征，本文主要从地表通量，湍流交换系数，湍流动能（q^2)，温度脉动方差（θ^2)及风温廓线等几个方面进行研究，结果表明，新方案能更好地反映边界层特征。     

青藏高原地面-对流层系统的能量收支

利用CCM3中的辐射模式CRM，计算了1月和7月地－气系统、地面－对流层系统和地面辐射能收支，研究了青藏高原地面－对流层系统辐射能收支的冬、夏季节特征及其与地面和地－气系统辐射能收支的关系，并与东部平原地区和高原北侧干旱地区比较。文中还讨论了云和高原冬季地面积雪对辐射能收支的影响，比较了大气辐射加热和地面感热通量对夏季高原对流层大气加热的贡献。     

Laboratory Studies Of Wind Stress Over Surface Waves

Simultaneous laboratory observations of wind speed, wind stress, and surfacewind-wave spectra are made under a variety of wind forcing patterns using cleanwater as well as water containing an artificial surfactant. Under typical experimentalconditions, more than half of the total stress is supported by the wave-induced stressrather than by the surface viscous stress. When the surfactant reduces the shortwind-wave spectra, the wind stress also decreases by as much as 20–30% at agiven wind speed. When the wind forcing is modulated in time, the wind stresstends to be higher under decreasing wind than under increasing wind at a givenwind speed, mainly because the response of short wind-wave spectra to varyingwind forcing is delayed in time. These examples clearly demonstrate that therelationship between the wind speed and the wind stress can be significantlymodified if the surface wave field is not in equilibrium with the wind forcing.Next, we examine whether the wind stress is estimated accurately if the wave-inducedstress by all surface wave components is explicitly evaluated by linear superpositionand is added to the surface viscous stress. It is assumed that the surface viscous stressis uniquely related to the wind speed, and that the wind input rate is determined by thelocal, reduced turbulent stress rather than the total stress. Our wind stress estimatesincluding the wave contributions agree well with observed wind stress values, evenif the surface wave field is away from its equilibrium with the wind in the presenceof surface films and/or under time-transient wind forcing. These observations stronglysuggest that the wind stress is accurately evaluated as a sum of the wave-induced stressand the surface viscous stress. At very high winds, our stress estimates tend to be lowerthan the observations. We suspect that this is because of the enhancement of wind stressover very steep (or breaking) short wind-waves.