Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.     

Development of a new method for efficiently calculating of evaporation from the phreatic aquifer in variably saturated flow modeling

In this paper, we proposed a new method that has been developed based on the surface soil moisture content (SSMC) to more efficiently calculate the groundwater evaporation in variably saturated flow modeling. In this method, the empirical formula to calculate evaporation was modified and the value of the formula varies from zero to one as a closed interval. In addition, the simulation code for calculating the groundwater evaporation based on the SSMC method was incorporated into the EOS9 module of Tough2, a variably saturated flow modeling code. Finally, two numerical tests and a case simulation were conducted to verify the feasibility and accuracy of the SSMC method. Simulation results indicate that the SSMC method is capable of appropriately simulating the characteristics of water flow in vadose zone and the amount of evaporation with the variable water table. And such results are in coincidence with the value calculated by the logistic function method, and fit well with the measured data globally rather than locally.     

Snow disaster characteristics in Palongzangbu River Basin and mitigation countermeasures for road engineering

The Palongzangbu River Basin contains the highest number of maritime province glaciers in China.There are 130 glacial lakes,64 snow avalanche sites and 28 glacial debris flow gullies distributed within the basin.Snow disasters play a controlling role in the Sichuan-Tibet Highway construction,due to the terrain's special characteristics of high altitude and large height differential.Segmentation mitigation countermeasures for the Sichuan-Tibet Highway are presented based on snow disaster severity level and damage mode of the road.In the Ranwu to Midui section,snow avalanches are regional disasters, so the line should be placed in sunny slopes.In the Midui Gully to Yupu section,the line should be placed in shady slopes and at higher elevations to reduce the risk of glacial lake outburst.In the Yupu to Guxiang section,all three snow disasters are minimal.In the Guxiang to Tongmai section,glacier debris flows are the major threat,thus the road should be placed in shady slopes.     

Twenty-five years of spectral UV-B measurements over Canada,Europe and Japan: Trends and effects from changes in ozone,aerosols, clouds,and surface reflectivity

Spectral UV records of solar irradiance at stations over Europe, Canada, and Japan were used to study long-term trends at 307.5 nm for a 25-year period, from 1992 to 2016. Ground-based measurements of total ozone, as well as satellite measurements of the Aerosol Index, the Total Cloud Cover and the surface reflectivity were also used in order to attribute the estimated changes of the UV to the corresponding changes of these factors. The present study shows that over the Northern Hemisphere, the long-term changes in UV-B radiation reaching the Earth's surface vary significantly over different locations, and that the main drivers of these variations are changes in aerosols and total ozone. At high latitudes, part of the observed changes may also be attributed to changes in the surface reflectivity. Over Japan, the UV-B irradiance at 307.5 nm has increased significantly by ∼3%/decade during the past 25 years, possibly due to the corresponding significant decrease of its absorption by aerosols. It was found that the greatest part of this increase took place before the mid-2000s. The only European station, over which UV radiation increases significantly, is that of Thessaloniki, Greece. Analysis of the clear-sky irradiance for the particular station shows increasing irradiance at 307.5 nm by ∼3.5%/decade during the entire period of study, with an increasing rate of change during the last decade, possibly again due to the decreasing absorption by aerosols.     

北极斯瓦尔巴、高亚洲和阿尔卑斯山冰川物质平衡对比研究

基于冰川物质平衡和平衡线高度数据,对北极斯瓦尔巴、高亚洲和阿尔卑斯山的冰川物质平衡变化和平衡线高度空间分布特征进行了对比分析,得出以下结论：（1）阿尔卑斯山冰川年均负物质平衡值最大,为-907 mm;斯瓦尔巴为-431 mm;高亚洲最小,为-264 mm。（2）高亚洲和斯瓦尔巴冰川物质平衡年振幅较小,年际变化较小;阿尔卑斯山冰川物质平衡年振幅较大,年际变化较大。斯瓦尔巴冰川物质平衡趋向正平衡,阿尔卑斯山和高亚洲冰川物质平衡趋向负平衡。（3）斯瓦尔巴内陆的冰川平衡线高度高于沿海地区,高亚洲冰川平衡线高度呈纬向地带性、经向地带性和区域地带性的分布规律,阿尔卑斯山的冰川平衡线高度主要受冰川所处海拔的影响。     

IPCC AR6报告解读：未来的全球气候——基于情景的预估和近期信息

依据IPCC第六次评估报告（AR6）第一工作组报告第四章的内容,对未来全球气候的预估结果进行解读。报告对21世纪全球表面气温、降水、大尺度环流和变率模态、冰冻圈和海洋圈的可能变化进行了系统评估,并对2100年以后的气候变化做了合理估计。评估指出全球平均表面气温将在未来20年内达到或超过1.5℃,平均降水也将增加,但随季节和区域而异,同时变率将增大。大尺度环流和变率模态受内部变率影响较大。到21世纪末,北冰洋可能出现无冰期;全球海洋会继续酸化,平均海平面将持续上升,百年内上升幅度依赖不同排放情景,都在2100年后继续升高。在最新的评估中采用多种约束方法,减小了预估不确定性的范围。AR6对于低排放情景以及“小概率高增暖情节”的关注为应对气候变化提供了更多、更完整的信息。综合报告的评估结果指出,未来需要进一步减小区域,特别是季风区气候预估的不确定性,并从科学研究和模式发展两方面加强我国气候预估能力的建设。     

浙中一次多风暴类型强对流天气成因及多普勒雷达特征

利用常规资料、区域自动站加密资料、探空资料、GFS 0.25°×0.25°逐6h的分析场数据和SB多普勒天气雷达资料对2018年5月18日发生在浙中地区的一次强对流天气过程进行分析。结果表明:此次过程产生了脉冲风暴、中等到强多单体风暴和飑线这3种风暴类型,分别出现冰雹、大范围强降水和雷雨大风等强天气。3种风暴的雷达回波在回波形态、强度、垂直结构、平均径向速度、垂直累积液态水含量VIL等特征如下:①脉冲风暴呈块状,初始回波高度在6～9km,强回波所在高度在-10℃等温线附近,强回波值达60dBz以上,VIL值出现跃升且最大值在50kg·m-2以上,冰雹出现在反射率因子核和VIL值迅速下降之后;②中等到强多单体风暴呈带状,大降水效率和"列车效应"是发生大范围强降水的主要原因,雷雨大风天气则与反射率因子核迅速下降、MARC、低层强辐散区有关;③飑线呈弓形回波形态,移速快,引起了大范围的雷雨大风天气。此次过程影响系统多,天气复杂,存在较大预报难点,在短时临近预报技术研究上有重要借鉴意义。     

一次攀西地区飑线天气过程形成机制分析

利用地面气象常规观测资料、区域自动站观测资料、雷达及卫星资料和NCEP 1°×1°的逐6h再分析资料,对2018年5月13日攀西地区南部的飑线天气过程的形成机制进行分析。结果表明:飑线发生在高空槽前,高空槽逐渐东移推动冷性气流沿背风坡东移,然后与前方低层暖空气汇合抬升形成对流;露点锋触发了飑线天气过程的形成;产生飑线天气区域的大气具有上干下湿、不稳定能量高、垂直风切变强、高层风速大和形成之前存在逆温层的特点;高空急流和动量下传对飑线的发生和加强具有促进作用;地形对飑线的形成和天气现象的分布有影响。     

淮河流域(河南段)连续性暴雨天气分型及环流背景

利用19812016年68月河南省淮河流域64个国家自动观测站逐日2020时日降水量资料、常规高空探测和地面观测资料等对淮河流域连续性暴雨时间分布特征、影响系统等进行分析和天气分型,结果表明:1)36年淮河流域共发生45次连续性暴雨,2000年的最多,19982008年是高发期,近10年较少,年出现次数无明显减少趋势,存在2~4年和4~6年两个周期;7月连续性暴雨次数最多,6月的最少,旬分布呈正态分布;最长连续时间5天,连续2天的最多。2)影响系统主要有切变线和高低空急流,高空急流在方向转换的过程中,降水有24h左右的减弱期,低空急流有明显的日变化特征,夜间加强,白天减弱。3)连续性暴雨按照500hPa影响系统,分为低槽型、副高边缘型、西北低涡型三类。4)以不同类型的3次典型连续性暴雨为例,从大尺度环流背景、高度距平场、水汽输送、高低空急流等方面探讨了连续性暴雨的维持成因,3次连续性暴雨的发生与异常的500hPa大气环流、高低空急流、切变线和持续偏强的水汽输送等有关。     

一次拖曳型飑线过程雨滴谱演变特征研究

利用Thies激光雨滴谱仪观测资料和CINRAD/SA多普勒雷达观测资料,分析了2017年7月18日一次典型中纬度拖曳型飑线过程不同发展阶段雨滴谱和积分参数的演变特征,主要结果为：1）成熟飑线回波包括对流带、过渡区和拖曳层状云区三部分,对流带前侧不断有对流带生成并合并到主对流带中,使得对流带的前沿具有强的反射率因子,并且有多个雨强大值中心。2）垂直穿过飑线对流带,雨强增加阶段有较少的小粒子（直径小于1 mm）和特大粒子（直径大于5 mm）,以及较低的雨滴浓度和反射率因子,而雨强减弱阶段有较多的小粒子和特大粒子,以及较高的雨滴浓度和反射率因子;飑线加强阶段,雨滴谱有较大的峰值直径（0.44 mm）、较多的大（直径大于3 mm）和特大粒子,而飑线减弱阶段,雨滴谱有较小的峰值直径（0.19 mm）、较少的大粒子。3）对流带、过渡区和层状云降水雨滴谱的Gamma谱三参数N0、μ、λ随雨强增大有明显的分层特征,相同雨强时,对流云和过渡区降水的三参数比层状云降水的数值大;而飑线不同发展阶段、不同降水类型的λ-μ关系具有一致性,二次多项式可以很好地拟合λ-μ关系。4）归一化雨滴谱参数NW和D0的分布可以用来区分对流云和层状云降水,并给出了新的分离线方程;另外,飑线在发展和减弱阶段的雨滴谱特征有明显差异,表明飑线演变过程降水形成的微物理机制发生变化,前期冷云过程有重要影响,而后期暖云过程起主导作用。