Fault induced permanent ground deformations: Experimental verification of wet and dry soil, numerical findings’ relation to field observations of tunnel damage and implications for design

Few building codes contains provisions fault surface ruptures and accompanying soil deformations which constitutes a great risk to human lives, buildings and infrastructure. A numerical and experimental comparison show a fair agreement of result. Analysis of “real” scale show the how water increases the incompressibility of wet soil causing shear deformations to become larger and conjugate ruptures to appear for reverse faults. Field observations and numerical analysis indicates that horizontal compression of soil surrounding underground structures should be taken into account in design.     

Effect of surface stress on magneto-elastic surface waves in finitely conducting media

This paper deals with the investigation of the effect of surface stress and conductivity on the propagation of surface wave in isotropic, homogeneous, elastic media under the action of a primary magnetic field. Formulation of the general surface wave propagation problem has been made, and the corresponding frequency equation has been derived. Frequency equations for Rayleigh wave, surface shear wave and Stoneley wave have been deduced from that of general surface wave as special cases. The effects of surface stress and magnetic field on the wave velocities and attenuation factors of Rayleigh wave and surface shear wave are shown by numerical calculations and graphs. Some important wave velocity equations, as obtained by other authors, have been deduced as special cases from the wave velocity equation for Stoneley wave. It is found that the combined effect of surface stress and magnetic field modulates the wave velocity ratios and attenuation factors of Rayleigh wave and surface shear wave to a considerable extent.     

Experimental study of surface texture and resonance mechanism of booming sand

The sound-producing mechanism of booming sand has long been a pending problem in the blown sand physics. Based on the earlier researches, the authors collected some silent sand samples from Teng- ger Desert, Australian Desert, Kuwait Desert, beaches of Hainan Island and Japanese coast as well as the soundless booming sand samples from the Mingsha Mountain in Dunhuang to make washing ex- periments. In the meantime the chemical corrosion experiment of glass micro-spheres, surface coating experiment and SEM examination were also conducted. The experimental results show that the sound production of booming sand seems to have nothing to do with the presence of SiO2 gel on the surface of sand grains and unrelated to the surface chemical composition of sand grains but is related to the resonance cavities formed by porous (pit-like) physical structure resulting from a number of factors such as wind erosion, water erosion, chemical corrosion and SiO2 gel deposition, etc. Its resonance mechanism is similar to that of Hemholz resonance cavity. Under the action of external forces, nu- merous spherical and sand grains with smooth surface and porous surface are set in motion and rub with each other to produce extremely weak vibration sound and then become audible sound by human ears through the magnification of surface cavity resonance. However the booming sands may lose their resonance mechanism and become silent sand due to the damping action caused by the invasion of finer particles such as dust and clay into surface holes of sand grains. Therefore, clearing away fine pollutants on the quartz grain surface is an effective way to make silent sand emit audible sound.     

Evolution of the variability of surface temperature and vegetation density in the great plains

This study focuses on how the variability of land surface temperature and vegetation density at the SGP ARM-CART site changes over episodic (day to day) and seasonal time scales using AVHRR satellite data. Four drying periods throughout the year are analyzed. Land surface temperature had an erratic relationship with time exhibiting no deterministic pattern from day-to-day or season-to-season. Furthermore, it did not exhibit spatial pattern persistence. On the other hand, vegetation density had a consistent spatial pattern and temporal decay during average length drying periods (less than 7 days) as well as within a season. However, there were distinct differences in the seasonal pattern of variation between winter and growing seasons. In addition, the paper highlights a methodology to quantify the relationships that exist at the land surface between the primary parameter of interest and the controlling variables.     

Wind erosion of blanket peat during a short period of surface desiccation (North Pennines,Northern England)

Strong winds are a characteristic feature of UK upland areas. Despite this, understanding of aeolian processes in upland environments of the UK is limited. This paper presents direct measurements and observations of blanket peat erosion by wind action during a two week period of desiccation in the North Pennines, Northern England. A circular configuration of mass flux sediment samplers was used to collect peat eroded by wind action from 16 cardinal compass directions. Meteorological conditions (wind speed, wind direction, precipitation and temperature) were recorded by an automatic weather station set up adjacent to the site. Surface desiccation led to peat crust erosion and dust deflation. During short (≤1 hour) periods of precipitation, wind‐driven rainfall also caused erosion. Typically, dust flux rates were up to two orders of magnitude lower than recorded during periods of sustained wet weather. Measurements demonstrate the hitherto unreported rapid switch in process regime between wind‐driven rainfall and dry blow deflation in blanket peat environments. Dry blow processes of blanket peat erosion may become more important in UK upland areas if climate change promotes more frequent surface desiccation. Copyright © 2006 John Wiley & Sons, Ltd.     

The effect of interpolation methods in surface definition: an experimental study

Mappings of the earth surface and their representation in 3D (three‐dimensional) models are commonly used in most recent research. Modeling research, which starts with classical surveying methods, acquires new dimensions matching the modern technologies. 3D models of any object or earth surface can be used in much visual and scientific research. A digital model of the landscape is an important part within creation of geo‐information systems used in the public administration and in the commercial sphere. It is an important tool in applications such as geomorphology, hydrology, geology, cartography, ecology, mining etc. Values of volume in terrains that do not have regular geometric structure can be obtained more accurately by using 3D models of surfaces with respect to developing technology. Basic data of 3D models must indicate 3D coordinates of the surveyed object in the reference frame. Distribution and intensity of points are important factors in modeling earth surfaces. A minimum number of points is desired in defining an object in 3D. Interpolation methods employing different mathematical models are used to obtain 3D models of terrain surfaces. In this study, the effect of interpolation methods in defining a terrain surface is investigated. For this purpose, a uniform surface, hill‐shaped artificial object with a known volume is employed. The 3D surface and volume are calculated by using 12 different interpolation methods. Point distribution, point intensity and accuracy of point measurements are not considered. The same data set was used for all the interpolation methods. The interpolation methods are compared and evaluated based on the results. Copyright © 2007 John Wiley & Sons, Ltd.     

遥感和GIS技术在全球海面风速分析中的应用

将遥感技术和地理信息系统（GIS）技术相结合，建立了一个基于TOPEX卫星的全球海面风速分析的海洋地理信息系统（MGIS）。阐述了全球海面风速分析模型的建立方法，定义了描述风场特征的相关参数，介绍了全球海面风速海洋地理信息系统的结构、功能和工作流程，另外，对系统的3个应用实例进行了地学分析。     

Design of the Urban Land Grading Information System

1　ＩｎｔｒｏｄｕｃｔｉｏｎＧｒａｄｉｎｇｕｒｂａｎｌａｎｄｃｏｒｒｅｃｔｌｙａｎｄｄｅｔｅｒｍｉｎｉｎｇｔｈｅｌａｎｄ ｐｒｉｃｅａｒｅｉｍｐｏｒｔａｎｔｂａｓｉｃｗｏｒｋｔｏｃａｒｒｙｏｕｔｔｈｅｃｏｍｐｅｎｓａｔｉｏｎａｌｅｘ ｐｌｏｉｔａｔｉｏｎａｎｄｄｅｖｅｌｏｐｔｈｅｒｅａｌｅｓｔａｔｅｍａｒｋｅｔ.Ｔｈｅｌａｎｄｇｒａｄｉｎｇｍｕｓｔｂｅｂｕｉｌｔｏｎｏｂｊｅｃｔｉｖｅｅｖａｌｕａｔｉｏｎａｎｄｓｃｉｅｎｔｉｆｉｃｅｖａｌｕａｔｉｏｎａｎｄｃａｌｃｕｌａｔｉｏｎｏｆｌａｎｄ ｑｕａｌｉ…     

近海多种卫星测高联合数据处理技术

海域海况复杂多变 ,潮汐不但受外海能量输入的控制 ,而且在复杂的海岸线、浅海海底和内陆河流运输的作用下变得异常复杂。卫星测高由于受复杂的海洋动力环境和陆地反射的影响 ,数据质量普遍较深海差。将多种卫星测高数据联合处理 ,可以大大提高近海海域平均海面高的精度与分辨率 ,增强测高卫星监测近海复杂动力现象与反演近海复杂动力机制的能力。本文讨论近海多种卫星联合数据处理的技术与方法 ,分别从提取海平面稳态和时变信息的角度较系统地研究了多种卫星测高联合数据处理方法 ,通过提取不同测高卫星海平面观测数据中与时间无关的系统偏差 ,建立多种卫星测高数据的海平面时变基准 ,从而将多种测高卫星海面监测数据融合到一个动力系统中。大大提高测高卫星海平面监测的时空分辨率 ,为联合多种卫星测高数据在大地测量与近海海洋动力学研究中的应用创造基本条件。