射电天文测量微波天线增益的测量技术

本文介绍了用四种定标基准ΔＴｃ＝（Ｔ０－ＴＬ），（ＴＨ－Ｔ０），（Ｔ０－ＴＡＮｚ）和（Ｔ０－ＴＨＮｚ），并用射电源作为校准测量微波天线增益的基本原理和方法。并对四种不同类型的天线增益进行了测量，测量结果表明，以ΔＴｃ＝（Ｔ０－ＴＨＮｚ）和总功率辐射计所组成的测量系统可实施增益的高精度测量。测量设备可以和接收系统兼容，不需专用测量设备，因此该技术可在工程中广泛使用。     

Variational method for objective analysis of scalar variable and its derivative

In this study real time data have been used to compare the standard and triangle method by performing the objective analysis of mean sea level pressure. In the standard method, derivative fields are obtained from the grid point data using finite difference scheme whereas in the triangle method, a set of non-overlapping triangles are formed from the observations and the scalar and the spatial derivatives are computed directly at the centroid of each of the non-overlapping triangles. These scalars and their derivatives are then mapped to uniform grids by using the standard method. It has been found that objectively analysed scalar field obtained using standard method is superior to the scalar field derived by the triangle method, whereas the derivative fields produced by triangle method are superior to the derivative fields produced using standard method. A variational objective analysis scheme has been developed and an experiment has been carried out with depression case of June (11–15) 2004. It is found that the new scheme (variational) is able to extract the better parts of both triangle and standard methods. The results of this study will be useful in carrying out diagnostic calculations that involve derivative estimates.     

A study on the identification of liquefaction-induced failures on ground surface based on the data from the 1999 Kocaeli and Chi-Chi earthquakes

One of the major causes of earthquake damage is liquefaction. However, it doesn't result in severe harm unless it leads to ground surface damage or ground failure. Therefore, prediction of potential for ground surface damage due to liquefaction is one of the important issues in microzonation studies for liquefaction-induced damage in areas with high seismicity. In 1985, based on a database compiled from Chinese and Japanese earthquakes, Ishihara considered the influence of the non-liquefied cap soil on the occurrence or non-occurrence of ground failure (mainly sand boiling), and proposed an empirical approach to predict the potential for ground surface damage at sites susceptible to liquefaction. However, some investigators indicated that this approach is not generally valid for sites susceptible to lateral spread or ground oscillation. In this study, a contribution to improve the approach by Ishihara is made. For the purpose, an index called liquefaction severity index (LSI) and data from two devastating earthquakes, which occurred in Turkey and Taiwan in 1999, were employed. The data from liquefied and non-liquefied sites were grouped and then analysed. Based on the observations reported by reconnaissance teams who visited both earthquake sites and the results of the liquefaction potential analyses using the filed-performance data, a chart to assess the potential for ground surface disruption at liquefaction-prone areas was produced. The analyses suggest that the procedure proposed by Ishihara is quite effective particularly for the occurrence of sand boils, while the bounds suggested in this method generally may not be valid for the prediction of liquefaction-induced ground surface disruption at sites susceptible to lateral spreading. The chart proposed in this study shows an improvement over the Ishihara's approach for predicting the liquefaction-induced ground surface damage. The microzonation maps comparing the liquefaction sites observed along the southern shore of Izmit Bay and in Yuanlin, and the surface damage and non-damage zones predicted from the proposed chart can identify accurately the liquefaction (sand boiling and lateral spreading) and no-liquefaction sites.     

矿物激光显微光谱分析结果的热力学校正研究

由于激光蒸发和激发不同矿物的过程,都是从有序体系到无序体系的热力学转换过程,因此可以用矿物标准熵S°来考察分析精度.笔者提出了对初步分析分析结果Ci进行热力学校正,校正因子主要是相同取样量条件下的热力学参数Vg=S°/Vmol,实际取样量Vd,校正公式为Ct=Vgi·Vdi·Ci/Vgt·Vdt.实践表明,这一校正方法提高了矿物激光显微光谱分析精度.     

太平洋大尺度环流数值模拟 I:数学模式及其性能

本工作基于曾庆存的海洋环流模式设计思想和大气物理研究所海洋环流模式(IAPOGCM)基本动力框架,设计并实现了四层太平洋环流模式;同时引进稳定有效的时间积分方案和海表热通量参数化方法,对太平洋大尺度环流进行了较为系统的数值模拟. 本文首先导出消除“刚盖”近似、扣除海洋标准层结、保持总有效能量守恒的OGCM基本方程组;给出空间差分格式和时间积分方案,引入海表热通量计算方法;然后,在太平洋区域对所设计的四层OGCM的一些模式性能进行了分析、表明,时间积分方案采用基于“灵活性系数”技术的加速收敛方法和适应过程中流场正压斜压进一步分解算法,同时采取一些技术处理,可确保模式稳定而有效地进行长时间数值积分、有效能量分析表明,与海面起伏相联系的有效表面位能是总有效能量的重要组成部分,它与动能同量级甚至更大些,因此在OGCM中须考虑有效表面位能与其它能量间的转换机制,这在物理上更加合理,而采用“刚盖”近似则是不合理的;同时,扣除海洋标准层结,缩小了位能与动能之间的量级差别,有利于长期数值积分的稳定进行.此外,这个模式能直接计算海面起伏和分析有效能量,使得表面流场和上层海洋热储率的模拟比已有文献的结果有明显的改进.除模式设计外,本部分只给出模式的基本性能,系统的模拟结果将在第Ⅱ,Ⅲ两部分发表.     

白昼光与验色仪

提出我国自行设计,用特制电源控制的高压短弧氙灯和光谱调节器计算、研制成功的验色仪。并叙述了设计验色仪的指导思想,理论计算与实验装置。指出验色仪中的白昼光模拟器（Ｄ６５光源）六项技术指标均达到ＣＩＥ（ＩｎｔｅｍａｔｉｏｎａｌＣｏｍｍｉｓｓｉｏｎｏｎＩｌｌｕｍｉｎａｔｉｏｎ）和先进国家规定的标准．     

大气压下磁力浮沉子法测量中国标准海水的密度

用自行设计安装的磁力浮沉子法密度装置测量溶液密度具有±3×10~(-3)kgm~(-3)的灵敏度,±3.5×10~(-3)kgm~(-3)的精密度。25℃时测定Nacl溶液的密度与Millero测量值平均偏差为2.6×10~(-3)kgm~(-3),求得NaCl的φ_v~0值为16.61(cm)~3mol~(-1)。 对12批中国标准海水及24个稀释中国标准海水的密度测量值(温度在15～25℃之间)与1980年国际海水状态方程计算值之间平均偏差为3.4×10~(-3)kgm~(-3)。实验结果表明中国标准海水及其稀释海水的密度与盐度及温度的关系遵从1980年国际海水状态方程。为中国标准海水作为溶液密度测量标准提供实验依据。     

北京地面沉降Js型静力水准自动化监测系统量程调整及修正值添加方法

本文介绍了Js型静力水准自动化监测系统构成。在多年监测的基础上,对该系统在地面沉降监测中量程的调节量、调节方向和调节方法进行了总结,对量程调节后的修正值添加原理、时机选择和方法进行了探讨。     

规范化管理在枣庄市薛城区煤矿发展中的应用

根据枣庄市薛城区辖区内煤矿开采资源储量将近枯竭的现状,阐述了实施规范化管理,增强矿井发展潜力的必要性。针对矿井实际情况,建立了一整套的管理制度考核机制,并通过实施规范化管理,促进矿井的安全生产,使该矿的经济效益和社会效益有了明显提高。