Application of LICOM to the numerical study of the water exchangebetween the South China Sea and its adjacent oceans

1 IntroductionThe South China Sea (SCS) is the largestmarginal sea in the western Pacific (see Fig. 1). It con-nects with the SCS through the Taiwan Strait, with thePacific through the Luzon Strait, with the Sulu Seathrough the Mindoro and Balabac Straits and with theJava Sea and Andaman Sea through the Sunda Shelf(For convenience, here we refer to the section at 1.5°N,Fig. 2). It is shown that the seasonal SCS circulation ismostly affected by the summer/winter monsoon, andthe no…     

南海北部及广东沿海新生代火山活动

调查区新生代火山活动十分活跃。岩性以基性为主,少数属超基性Sr~(87/86)初始值最高0.706189,最低0.703178,陆区和海盆新生代火山岩均来自地幔。 K-Ar年龄最老62.86百万年,最新0.43百万年。从老至新可划分为8个活动期,分别为古新世早期、始新世早期、渐新世末期、中新世中期、中新世晚期、早更新世早期、早更新世晚期和中更新世中期。 海盆与陆区火山活动在岩性、同位素特征、活动时期、喷发方式以及岩浆来源等方面都十分相似,二者属统一的新生代火山岩区。     

压力传感器的自动标定技术

针对压力测量设备生产和维护过程中,对关键部件压力传感器标定处于手工操作状态、效率低、操作人员不易掌控、标定结果处置复杂的现状,开发了针对压力传感器的自动标定技术。该技术将计算机控制、智能化、曲线拟合和误差分析引入到压力传感器的标定过程中,大幅度提高了标定的效率和可靠性。经此技术标定过的压力探头,在使用中具有互换性,减轻了数据后处理工作的难度。     

南沙西部海域伸缩型右旋走滑双重构造系统及其动力学过程

万纳断裂带为一典型的右旋走滑系统,由其南段前锋的拉奈—沙捞越走滑－收缩叠瓦扇、北段尾端的南海西南次海盆西南端走滑－伸展叠瓦扇和中段的万安盆地走滑－拉分双重构造所组成,其动力主要源自中生代末以来华南—印支陆缘岩石圈的拆沉作用和南海海底扩张,它的走滑拉分作用直接导致了万安盆地的产生,对该海域油气等资源的形成与聚集起了重要的控制作用。     

海洋平台沉垫的波浪载荷试验研究

本文通过对海洋平台沉垫的波浪载荷试验研究分析，着重研究了在规则波中平台沉垫总体波浪载荷和局部水动压力分布的情况，定性地考察了非线性影响、浅水影响的重要性，为今后波浪理论中粘性的引入，进而考虑粘性与波浪运动的非线性相互干扰提供实测依据     

耗散结构理论在判断南海热带气旋路径演变中的应用

本文用耗散结构理论推导出南海热带气旋的移动公式,通过实际应用和实例检验,证明它对估计南海热带气旋路径演变有一定的实用价值。     

南海尖峰海山多金属结壳地球化学

南海尖峰海山多金属结壳富含30多种元素,其锰铁矿物主要由钡镁锰矿,δ-MnO_2和FeOOH·xH_2O组成。与其它海区的结壳相比,尖峰海山结壳富含Cu、Ni、Ba、Zn、Pb等元素,而Co、Ti、稀土元素(REE)、Sr等元素相对较贫。研究表明,HREE亏损,具明显的Ce正异常,较明显的Tb正异常和Yb负异常。这是氧化弱碱性海洋环境所致。结壳是水成作用的产物,它的形成受南海独特的古海洋环境所控制,海底火山热液作用,可能也是影响因素之一。     

Prediction of impact pressure induced by breaking waves on vertical cylinders in random seas

This paper presents a method to statistically predict the magnitude of impact pressure (including extreme values) produced by deep water waves breaking on a circular cylinder representing a column of an ocean structure. Breaking waves defined here are not those whose tops are blown off by the wind but those whose breaking is associated with steepness. The probability density function of wave period associated with breaking waves is derived for a specified wave spectrum, and then converted to the probability density function of impact pressure. Impacts caused by two different breaking conditions are considered; one is the impact associated with waves breaking in close proximity to the column, the other is an impact caused by waves approaching the column after they have broken. As an example of the application of the present method, numerical computations are carried out for a wave spectrum obtained from measured data in the North Atlantic.     

A summary of the geology and oil habitat of the Eastern Flank Hydrocarbon Province of South Oman

The Eastern Flank Hydrocarbon Province borders the southeastern edge of the South Oman Salt Basin in the southern part of Oman. An intensive exploration programme by PDO over the past seven years has led to the discovery of almost 2 × 10⁹ m³ of oil with current production of some 15000 m³/d from six fields.In stark contrast to other oil habitats of the Arabian Peninsula, the main play involves rock units and geological events ranging in age from Late Precambrian to Quaternary Times, while trap development and charging are closely related to syn-tectonic salt dissolution.The principal reservoirs and seals are poorly consolidated, Palaeozoic clastics which drape, due to salt dissolution, over residual ‘cores’ principally composed of either Lower Palaeozoic sandstones (Haima Group), or Late Proterozoic carbonates (Huqf Group), or some combination of these. Oils have been geochemically correlated with algal source rocks of the Huqf Eastern Flank. Structures are considered to have been ‘charged’ from Late Mesozoic times onwards in conjunction with progressive subsurface salt removal and the onset of maturation of local source rocks. The effectiveness of ‘charging’ along the retreating salt edge is indicated by the small percentage of dry wells.Major oil zones are found in both anticlinal and truncation traps which are commonly developed around sandstone (Haima Group) cores. Oils show a wide range of characteristics but are typically heavy, early expulsion crudes, high sulphur with little associated gas. Bacterial transformation is not uncommon.Producing reservoirs mainly occur at relatively shallow depths (600–1200 m). Primary recovery factors of around 7% reflect the high density and viscosity of the Eastern Flank crudes and have initiated interest in Enhanced Oil Recovery (EOR) techniques. Two such pilot projects, involving steam and polymer flooding, are due to commence in 1984 and, if successful, will substantially increase the reserve base of these fields.     

Waveform Shaping of Sonar Transducers for Improving the Vertical Resolution in Sub-bottom Sediments Profiling

Vertical resolution is of fundamental importance in sonar exploration and is directly related to the duration of the acoustic pulse generated by the transducer. The shorter the radiated pulse, the higher the vertical resolution. Many sub-bottom profiling sonar systems use piezoelectric transducers because they are reversible and well understood. Piezoelectric projectors are normally resonant transducers, which are intrinsically narrowband. A piezoelectric transducer is usually driven by a tone-burst. However, it is possible to use Fourier techniques to find a pre-compensated electrical driving function so that the transducer radiates a prescribed wider band acoustic waveform. This technique can be applied to synthesize zero-phase cosine-magnitude, Gaussian, and bionic pulses, with a conventional sandwich transducer. Zero-phase cosine-magnitude waveforms provide minimum length pulses (and therefore maximum resolution) within a prescribed frequency band.The aim of this paper is to illustrate the synthesis of wideband acoustic pulses using an underwater piezoelectric projector. The conventional acoustic waveform radiated when a Tonpiltz transducer is transiently excited using a “click” and allows its frequency response function to be measured. This function is used to design the electrical signal which then drives the transducer so that it radiates the shortest pulse compatible with its mechanical response. The significant resolution enhancement of the waveform shaping process is illustrated by its application to a sediment wedge model.