Adhesion of foulings on surface energy of silicone rubber coatings

INTRODUCTIONBiologicalfoulingonthehullsofshipsandothersubmergedmarinestructurescausesgreatha~s.Inadditiontodecreasingship'sspeed,andincreasingitsfuelconsumption,biologicalfoulingalsoincreasestheweightofnavigationalbuoys,interfereswithoperatingequipmentandsounddevices,clogsseawaterpipingsystems,adverselyaffectsheat-exchangerperformance,andpromotescorrosionofmetalsurface(HuangandCat,1984).UPtothepresent,antifoulingpaintshaveachievedtheireffectivenessbyreleasingattheirsurfacebiocides,allcom…     

SMOS卫星遥感海表盐度资料处理应用研究进展

土壤湿度和海洋盐度卫星首次提供了覆盖全球的高频率、高精度、业务化的海表盐度产品,但其处理和延伸应用仍处于初级阶段,后续校准校正工作还将持续数年,如何及时把握其发展轨迹成为一个重要的科学问题.本研究从SMOS计划、数据概况、盐度反演算法、格点产品制作、多源数据融合和产品应用等方面,介绍和评述了SMOS计划及其海表盐度产品应用研究进展,着重分析了反演算法中的各种误差来源,对在轨2 a的运行情况进行了回顾、对未来的发展重点进行了展望,旨在为开发和应用SMOS产品提供参考.     

表面粗糙对渤海海冰热红外辐射方向特征的影响研究

热红外遥感技术使大范围、快速地监测渤海海冰表面温度成为可能。然而,目前绝大多数遥感器都是小视场角的,只对海冰在某个方向上的辐射能量进行了测量。由于自然界的海冰大多数都是高低起伏的、不平坦的,如果近似地认为遥感像元尺度内各部分温度是相同的,有时会带来较大误差。在盛冰期的渤海辽东湾东岸固定冰区,分别用3D激光扫描仪、热红外成像仪和自计温度计测量了渤海海冰的表面形状、辐射亮温和真实温度。结果表明,由于海冰表面粗糙,会形成三维非同温像元。同时,也会导致传感器在粗糙海冰的各个部分的局部观测天顶角与整体观测天顶角有所不同,造成粗糙海冰与平整海冰的方向辐射特征有较大差异,平整海冰更接近理想平面,粗糙海冰更接近朗伯面。     

Climate driven changes in subtidal kelp forest communities in NW Spain

Reconstructions suggest a massive decline of nearly 1400 ha of kelp forest in North Western Spain in 2007. In line with global rising temperatures, we hypothesized that Sea Surface Temperature (SST) surpassed a lethal threshold for kelp. We examined whether changes in SST correlated to the proposed decline in kelp forest. All investigated SST characteristics suggested to affect kelp abundance increased significantly during the past thirty years, reaching extreme values during the last decade. In addition over the past two decades, the landscape formerly dominated by both cold and warm temperate canopy forming and understory species changed to one dominated by warm temperate understory species, resulting in a loss of vertical community structure. Fisheries landing data of kelp associated species was used to support the suggested change in kelp abundance. Subsequent recovery of the kelp appears to be occurring in deeper waters.     

南海神狐水合物钻探区不同形态流体地震反射特征与水合物产出的关系

天然气水合物的分布在很大程度上受到含气流体运移的影响。南海北部陆坡区,尤其是珠江口盆地的白云凹陷,普遍存在流体渗漏的现象,暗示了水合物赋存的良好前景。神狐海域水合物钻探区内的高分辨率地震资料显示,区域内发育大量流体运移通道,在地震剖面上表现为不同形态的地震反射模糊带,根据其形态特征,可以划分为花冠状和穹顶状两大类模糊反射带。模糊反射带的存在意味着研究区内具有良好的含气流体运移条件,能够为甲烷气体的垂向运移提供通道。神狐海域水合物的钻探结果表明,水合物的分布与模糊反射带的分布范围具有良好的空间匹配关系,其中,花冠状地震反射模糊带侧翼部与中尺度正断层相连,促进了含气流体的侧向运移,顶部与可能的微裂隙相通,气体可向上运移至水合物稳定带,形成了水合物藏;而穹顶状地震反射模糊带顶部则通过疑似流体通道与海底沟通,这种结构极易形成气体逃逸而无法形成水合物。因此,不同形态特征的模糊反射带可能对水合物的分布具有一定的指示意义。     

Role of sea surface temperature and rainfall in determining the stock and fishery of the common octopus (Octopus vulgaris,Mollusca, Cephalopoda) in Tunisia

Octopus (Octopus vulgaris, Mollusca, Cephalopoda) is an important and valuable fishery resource on the eastern and southern coasts of Tunisia, but its landings are highly variable. This paper explores the effect of environment on octopus catch per unit effort (CPUE) during a 12‐year period, through correlation analyses and the incorporation into surplus production models of sea surface temperature (SST) and rainfall data collected during cold (January–May) and hot (August–October) seasons. CLIMPROD software was used to select the appropriate model and fit it to the fishery and environment data. In both seasons, SST significantly contributed to CPUE variability; fishery production was influenced positively by cold season SST but negatively by hot season SST. Due to a poor fit with cold season data, the impact of rainfall was analysed only for the hot season, during which it has a positive effect on production. Results are discussed in view of the life‐cycle of octopus and the dynamics of the Tunisian fishery. This first study of octopus variability in Tunisia highlights the necessity to incorporate environmental influence into stock assessment and management advice.     

锦州湾表层海水微塑料分布特征

海洋微塑料是全球关注的新兴环境问题,海湾由于特殊的地理环境特征,成为微塑料分布研究的热点区域。本研究以锦州湾为研究海域,于2017年10月布设了11个点位开展表层海水微塑料样品采集,在实验室采用湿式氧化法开展样品前处理,应用傅立叶变换显微红外光谱仪分析鉴定微塑料成分。研究结果表明,锦州湾表层水体微塑料平均丰度为(0.93±0.59)个/m³,微塑料数量占全部塑料样品的96.2%。微塑料的主要成分为聚丙烯和聚乙烯,分别占55.0%和23.5%;线状和片状塑料的比例最高,分别占41.7%和26.2%;白色、蓝色和半透明微塑料分别占35.1%、26.0%和21.4%。受水动力条件和陆域河流输入等影响,锦州湾表层水体中微塑料的空间分布整体呈现北部偏高,向南部递减的趋势。     

黄骅电厂二期工程温排水排放方案优选

在利用分步杂交有限元方法建立渤海湾潮流场的基础上,通过数值模拟的方法建立黄骅电厂温排水海域的温度场,对不同温排水设计方案进行了预测分析。设计方案充分考虑了排放口位置、排水量和温升对海域环境造成的影响,设计了一、二期工程排放口分建和合建时的五种方案。预测结果的对比分析显示,方案V(一、二期工程温排水集中由2排放)是最佳方案。     

Automatic tracing of the foot of the continental slope

The UNCLOS III (Article 76, Section 4(b)) defines the foot of the continental slope as the point of maximum change in the gradient at its base. It is impossible to locate so defined afoot and thus to trace the foot‐line objectively by eye. In this study we show a method designed automatically to detect and trace the foot‐line of the continental slope from an irregular array of bathymetrical data. Our algorithm first transforms the bathymetric surface to a maximum curvature surface. On this new surface, the foot‐line corresponds to one of the ridges; instead of tracing the foot‐line on the bathymetric surface, we now can trace the ridges on the maximum curvature surface. The tracing of the ridges can be done automatically and objectively and the foot‐line is identified as being one of these ridges. We devote particular attention to the case when the ridge‐line is not defined, i.e., to the case when the point of maximum gradient change becomes a region of maximum gradient change.     

Implementation of Tidal Constituent Interpolation Method for the Israeli Coastline

Many ship-borne geodetic surveys at sea, such as Global Navigation Satellite System (GNSS)-based sea surface height (SSH) observation, acoustic profiling of the bottom, and others, deal with a dynamic topography which undergoes several changes during the survey campaign (e.g., changes in tide, salinity and currents). Those changes affect the measurements and may causes for some variations in the results. There are several methods for tidal variations correction, being the most dominant phenomena, such as tidal zoning, tidal constituent interpolation or ocean tidal models. In this study, we have implemented the tidal constituent interpolation method for the Israeli coastline in order to assess its quality and determine whether it is suitable for use in this particular region. This paper depicts the interpolation method, discusses some difficulties in the implementation for the Israeli coast and presents results from exemplary processing. In addition, we compare the results to those obtained using global and regional tidal models.