渤海GNSS-R机载测风试验及其反演结果

对渤海GNSS-R机载试验进行了海面风场反演.结果表明,风速精度优于1 m/s,风向精度优于20°.     

某基坑工程土钉支护工作性状试验研究

通过对广州天河荟雅苑基坑工程土钉支护进行试验和研究,分析了土钉支护体系的工作性状,并为同类工程的设计提供了一定的依据。     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Using numerical modelling to evaluate tsunami hazard near the Kuril Island

A sequence of computer experiments is used to study questions concerning the tsunami problem as a quantitative estimate of tsunami danger, detailed geographical tsunami classification, determination of the parameters of critical tsunami waves, and the conditions of their development. We call a wave critical, if its impact on the coast is most hazardous.Using the Middle Kuril Island as an example, we present the results of a computer experiment which includes determining the wavefields on the shelf and estimating the effects connected with the deep-water Bussol and Diana Straits.Numerical simulation of tsunami waves of different sources permits the assessment of the extent of tsunami danger in different areas of the coastal zone of Simushir Island, depending on the location of the focus zone and their geometry.The major singularities of the wavefield arise in the zones of the deep-water straits. The distribution of the amplification factors is determined by both the global parameters of the wavefields and the local properties of individual harbours. The results obtained for a particular harbour in the northern part of Simushir Island, formed the basis for the quantitative estimate of tsunami danger for this area.     

Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.     

Damage risk assessment of breakwaters under tsunami attack

Turkey was struck by two major events on 17 August and 12 November 1999, named Izmit (M _w = 7.4) and Düzce (M _w = 7.2) earthquakes, respectively. Rubble mound breakwaters in Izmit Bay experienced little damage, as forecasted by the new risk assessment model in which tsunami occurrence risk was included in the damage estimations. In order to determine the occurrence probability of structural damage under design conditions, including the environmental loading parameters of tsunami and storm waves, tidal range and storm surge, the Conditional Expections Monte Carlo simulation was applied in the risk assessment model developed in this study for the Esenköy Fishery Harbour, Turkey. A tsunami was not the key design parameter when compared to storm waves for the main breakwater of the harbour, however, in places with great seismic activity, the tsunami risk should be important depending on the occurrence probability and magnitude of the tsunami.     

Cellular automata as analysis and synthesis engines at the geomorphology–ecology interface

The linkages between ecology and geomorphology can be difficult to identify because of physical complexity and the limitations of the current theoretical representations in these two fields of study. Deep divisions between these disciplines are manifest in the methods used to simulate process, such as rigidly physical-deterministic methods for many aspects of geomorphology compared with purely stochastic simulations in many models of change in landcover. Practical and theoretical research into ecology–geomorphology linkages cannot wait for a single simulation schema which may never come; as a result, studies of these linkages often appear disjointed and inconsistent.The grid-based simulation framework for cellular automata (CA) allows simultaneous use of competing schemas. CA use in general geographic studies has been primarily limited to urban simulations models of change for land cover, both highly stochastic and/or expert rule-based. In the last decade, however, methods for describing physically deterministic systems in the CA framework have become much more accurate. The possibility now exists to merge separate CA simulations of different environmental systems into unified “multiautomata” models. Because CAs allow transition rules that are deterministic, probabilistic, or expert rule-based, they can immediately incorporate the existing knowledge rules in ecology and geomorphology. The explicitly spatial nature of CA provides a map-like framework that should allow a simple and deeply rooted connection with the mapping traditions of the geosciences and ecological sciences.     

青藏高原清水河多年冻土区铁路路基沉降变形特征研究

通过埋设在青藏铁路路基中两个断面内的6条沉降观测管3 a来的地基沉降变形资料,研究了高原多年冻土区铁路路基的沉降变形特征,分析了填筑铁路路基对下伏多年冻土融化变形的影响。研究表明,由于受到填筑路基时赋存在路基填料内的热量的影响,铁路路基下伏多年冻土上限在施工初期会有一个明显的下移沉降,铁路路基也随之有一个较大幅度的工后下沉变动,随着时间的推移,路基下降速率会逐渐下降,但在短时间内不会停止下来,而且由于太阳辐射和路基边坡形状的影响,路基向阳面与背阴面的变形有较大的差别,且在近南北向展布的路基上表现最为明显。