西北地区不同类型云的时空分布及其与降水的关系

利用1983年7月～2001年9月国际卫星云气候计划ISCCP D2的月平均资料，对西北不同区域不同类型云的云量和云水路径的时空分布及其与降水的关系进行了研究。结果表明:高原气候区是各种云出现最多的地区，特别是积状云的云量明显高于其他两区，但这些云的云水路径值低；西北地区大多数云云量的高值区出现在天山山区、北疆地区、陕西东南部和青藏高原的部分地区。高云和部分中云云量空间分布特征与降水有着较好的一致性:沿着天山—昆仑山—祁连山一带以及陕南和／或陇南地区是高值区，低值区在塔里木盆地—内蒙古西部戈壁沙漠—黄土高原西北部一带；绝大多数云类春夏季节云量维持较高，秋冬季节云量较少。云水路径值较大的层状云类的云量多寡与降水多寡相一致；积状云类和层积云类云量多少与降水没有一定的关系，在降水偏少时，这类云的云量大多与降水正常时相近，有些云的云量甚至比降水偏多时还要多。     

根据Dobson和TOMS资料分析北京和昆明大气臭氧总量变化特征

用约２０年 Ｄｏｂｓｏｎ和ＴＯＭＳ资料来分析北京（３９.９３°Ｎ，１１６.４０°Ｅ）和昆明 （２５.０２°Ｎ，１０２．６８°）两地大气臭氧总量的变化特征，结果表明：（１）在１９７９－２０００年间北京大气臭氧长期变化趋势是－０．６４２ ＤＵ／年，而昆明在１９８０－２０００年间的趋势是－０.００９ ＤＵ／年；（２）北京和昆明两地大气臭氧都有很强的季节内变化（尤其冬季更强），与季节性变化强度相当；（３）在北京和昆明，由记录较短的大气臭氧资料分析得到的长期变化趋势，与较长记录得到的结果有显著差异；（４）在北京（中纬度）和昆明（低纬度）大气臭氧都有显著的准两年振荡信号；（５）两个站点大气臭氧的年际变化主要由长期趋势项和准两年振荡信号组成；（６）Ｄｏｂｓｏｎ仪测量得到的臭氧总量与ＴＯＭＳ资料非常一致。     

东亚地区春冬季与夏季大气环流异常相互关系的研究

利用1951~2000年共50年的北半球500 hPa月平均高度距平场资料和奇异值分解技术（SVD），重点对东亚地区季节间大气环流异常的相互关系进行了初步探讨。结果表明，东亚地区季节间大气环流异常存在着较为密切的关联，并且这种明显的非同步联系具有时空相关显著的特点，尤其是夏季大气环流异常与其前冬和前春大气环流异常的联系更为密切。当前冬和前春北半球东亚大槽和北美大槽及蒙古高压偏强（或偏弱），极涡偏弱（或偏强），中高纬度盛行经向环流（或纬向环流），以及低纬和热带地区高度正距平（或负距平）明显时，则对应于夏季东亚地区西太平洋副高和鄂霍次克海阻高强度偏强（或偏弱），位置偏南（或偏北），贝加尔湖阻高强度也偏强（或偏弱），但位置偏西（或偏东）的大尺度环流形势出现。当春季北半球大气环流具有上述特点以及夏季鄂霍次克海阻高和西太平洋副高强度偏强（或偏弱），位置偏南（或偏北），且极涡较弱（较强）时，则东亚地区秋季大气环流对应于蒙古高压加强（或较弱），西太平洋副高减弱（或加强），并向南和向东移动（或移动较慢），极涡向南扩散（或扩散减弱），大气环流向冬季过渡加快（或减慢）。另外，大气环流异常还具有一定的持续性特征。     

古—中生代之交的全球变化与生物效应

古—中生代之交是显生宙以来最大的一次生物绝灭期 ,其形成机制一直是地学界长期探讨的热点课题之一。地史重大转折期是地球内、外各圈层长期作用下 ,各种量变达到阀值 ,加之可能的外因激化 ,在短时间内以连锁反应形式相继质变 ,形成了全球变化 (包括生物绝灭 )的地球突变期。文中从可能的外因 (外星体撞击事件 )及内因 (岩石圈的变化 ,地球表层的变化和生物圈的变化 )两个方面探讨了古—中生代之交的全球变化与生物效应     

Capture-zone design in an aquifer influenced by cyclic fluctuations in hydraulic gradients

Design of a groundwater pumping and treatment system for a wood-treatment facility adjacent to the tidally influenced Fraser River estuary required the development of methodologies to account for cyclic variations in hydraulic gradients. Design of such systems must consider the effects of these cyclic fluctuations on the capture of dissolved-phase contaminants. When the period of the cyclic fluctuation is much less than the travel time of the dissolved contaminant from the source to the discharge point, the hydraulic-gradient variations resulting from these cycles can be ignored. Capture zones are then designed based on the average hydraulic gradient determined using filter techniques on continuous groundwater-level measurements. When the period of cyclic fluctuation in hydraulic gradient is near to or greater than the contaminant travel time, the resulting hydraulic-gradient variations cannot be ignored. In these instances, procedures are developed to account for these fluctuations in the capture-zone design. These include proper characterization of the groundwater regime, assessment of the average travel time and period of the cyclic fluctuations, and numerical techniques which allow accounting for the cyclic fluctuations in the design of the capture zone. Electronic Publication     

Labour markets in transition. The experiences of women in two border regions of East Germany

The political turning point in the former GDR and the transformation processes that have been observed since then have significantly affected economic and social structures in the new Federal States. Gender roles, however, were subjected to even more dramatic changes. Whilst many women experienced the employment policies of the GDR era as beneficial, social researchers often designate them as the losers of unification nowadays. This is largely because the abundance of State support measures for employed women and mothers has been drastically reduced and women as a group have been hit hardest by the crisis on the East German labour market. Using two cases (Mecklenburg-Westpommerania and Thuringia), this paper aims to illustrate the impact of the transformation process on the everyday (working) lives of women. We are particularly concerned with a comparative analysis of how women experience and deal with regional disparities in East Germany. This revised version was published online in July 2006 with corrections to the Cover Date.     

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.     

Al hematites prepared by homogeneous precipitation of oxinates: material characterization and determination of the Morin transition

A novel method for synthesis of aluminium hematites, based upon the homogeneous precipitation of Fe and Al oxinates in various proportions, is presented. The precursor precipitates are heated in air at 700?°C. X-ray diffraction, thermal analyses, BET, FTIR, optical reflection analysis, TEM and Mössbauer spectroscopy at room temperature and 80?K of the resulting products indicate that single-phase hematites are formed with structural Al substitution of up to 10 at%. Interestingly, the particle size (>100?nm) is not substantially reduced by the Al content. Although it remains difficult to obtain a homogeneously distributed Al substitution in the final hematite, this processing line offers a unique opportunity to separate the effects of grain size and Al substitution on the Morin transition temperature (T _M) of Al hematite. From the comparison between the present hematites and a series of Al-substituted hematites with lepidocrocite as precursor, it could be shown that the effect on T _M, associated with a change of a factor 10 in grain size, is about 1/3 of the effect caused by a change of 10 in the degree of substitution. Finally, it is suggested that proper thermal treatments under different conditions of the same precursors are likely to produce spinel phases.     

软基上高速铁路路桥过渡段的技术措施研究

通过对高速铁路路基与桥梁过渡段动力特性分析，指出结构物沉降差是导致轨面不平顺的主要因素。分析了沉降差产生的原因，提出了软基上路桥过渡段的结构设计方案，并对其施工方法及质量检测标准进行了探索。     

韧-脆性剪切带构造控矿演化模式--以青海省乌兰县托莫尔日特金矿区为例

通过对青海省乌兰县托莫尔日特金矿区韧－脆性剪切带变形特征、成矿物质与热液来源及运移条件分析，提出了该区构造控矿演化的四阶段模式。该模式认为，早期的韧性剪切变形导致了成矿物质的由深部向浅部、由韧性剪切带外部向韧性剪切带内部的活化迁移，成矿热液在韧性剪切带上部（即韧脆性转换带附近）得以大量聚集。韧性变形后期温压条件降低，韧性变形转化为脆性变形，地表大气降水沿贯通性较强的脆性破裂带大量下渗，到达韧－脆性转换带附近，与该处积聚的成矿热液充分混合，热液性质发生改变，在相对张性或较薄弱的构造有利部位大量沉淀。由于断裂带的周期性活动，成矿物质得到多次沉淀而不断富集，最终形成金矿体。矿体形成后的构造隆升及剥蚀作用，使韧－脆性剪切带出露地表，金矿床也随之出露到近地表处。因此在矿区石英脉型金矿体的下部，可能会存在糜棱岩型金矿体，但品位可能会有所下降。